Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

Maskiningeniør, Maskinmester eller lign.

Konstruktør
- med evne, vilje og kunnen til at skabe det næste nye på markedet

Virksomheden 
KEN HYGIENE SYSTEMS er en innovativ virksomhed med over 70 års erfaring inden for udvikling, produktion, salg og servicerings af opvaskemaskiner til laboratorier, hospitaler, storkøkkener og fødevareindustrien. Virksomheden tilbyder et bredt program af standardløsninger og udvikler specialløsninger til individuelle formål. 

KEN indtager i dag en ledende position på det skandinaviske marked og har egne salgsselskaber i Sverige og Norge. Størstedelen af produktionen afsættes til eksportmarkeder gennem et vidtforgrenet forhandlernet, og ud over samhandel med en række europæiske markeder eksporterer KEN til flere mellemøstlige lande samt til oversøiske markeder som Japan og Australien.  

KEN HYGIENE SYSTEMS er inde i en spændende udvikling, hvor kravene til nye produkter og løsninger er i fokus.  

Med en blanding af både standard og kundespecifikke løsninger, er virksomheden en legeplads til teknikeren som vil udfordre sin faglige fantasi og bidrage til, at virksomheden forbliver firstmover af innovative kvalitetsprodukter, til kunder som kun vil have det bedste.  Har du passion for automatisering, robotter og bæredygtighed, så kan du i denne stilling bruge al din tekniske kunnen til at sikre virksomhedens position på markedet.  

Se mere på http://www.KEN.dk/ 

Stillingen  Du får mulighed for at udvikle din kvalifikationer inden for automatisering og robotteknologi. Som udgangspunkt vil din hverdag vil være præget af opgaver inden for områderne:  

  • Idégenerering 
  • Emnekonstruktioner  
  • Projekttegninger  
  • Kostpris minimering  

  Faglige kvalifikationer  

  • Du har kendskab til tyndpladekonstruktion  
  • Du har tidligere arbejdet med både elektronik og mekanik  
  • Du er en erfaren 3D konstruktør  
  • Du behersker teknisk engelsk i skrift og tale 
  • Du er uddannet teknisk designer, konstruktør, ingeniør, automationsteknolog eller maskinmester. Tøv ikke med at ansøge, hvis du på anden vis har opnået viden omkring ovennævnte områder  

Personlig profil 
Du tænker ud af boksen når maskiner skal udvikles og forbedres og sætter spørgsmålstegn til den konventionelle måde at tænke maskinopbygning på. Du er detaljeorienteret, omhyggelig og sætter ære i at videregive kvalitet. Du er vedholdende, proaktiv og sørger for at deadlines overholdes. Du motiveres af at kvalitetsforbedre produkter og trives i en afvekslende hverdag.   

Du tilbydes 
At blive en del af en velrenommeret virksomhed i processen af ekspansion og med et højt ambitionsniveau. Du vil have din daglige gang i et uformelt miljø, med høj faglig stolthed og mulighed for vidensdeling med nogle tunge udviklere som kan deres kram i en organisation, hvor du vil blive set og taget hånd om både i forhold til din personlige og faglige udvikling.    
Ansøgning mærket ref.: 2166  

Hvis du er klar til at blive fagligt og menneskeligt udfordret, og mener jobbet svarer til dine kvalifikationer og jobønsker, hører vi meget gerne fra dig. Stillingen skal besættes hurtigst muligt, men vi venter gerne på den rigtige kandidat.   

Har du spørgsmål, er du velkommen til at kontakte Jørn Ravn på tlf.: 2483 6084   

Vi ser frem til at modtage din ansøgning   

Med venlig hilsen 

F10 Human Resource     
Følg F10 Human Resource på www.linkedin.com/company/f10-hr-&-rekruttering 


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330054517Phoenix-2d34a28612019-07-04T00:00:00Maskiningeniør, Maskinmester eller lign.

Konstruktør
- med evne, vilje og kunnen til at skabe det næste nye på markedet

Virksomheden 
KEN HYGIENE SYSTEMS er en innovativ virksomhed med over 70 års erfaring inden for udvikling, produktion, salg og servicerings af opvaskemaskiner til laboratorier, hospitaler, storkøkkener og fødevareindustrien. Virksomheden tilbyder et bredt program af standardløsninger og udvikler specialløsninger til individuelle formål. 

KEN indtager i dag en ledende position på det skandinaviske marked og har egne salgsselskaber i Sverige og Norge. Størstedelen af produktionen afsættes til eksportmarkeder gennem et vidtforgrenet forhandlernet, og ud over samhandel med en række europæiske markeder eksporterer KEN til flere mellemøstlige lande samt til oversøiske markeder som Japan og Australien.  

KEN HYGIENE SYSTEMS er inde i en spændende udvikling, hvor kravene til nye produkter og løsninger er i fokus.  

Med en blanding af både standard og kundespecifikke løsninger, er virksomheden en legeplads til teknikeren som vil udfordre sin faglige fantasi og bidrage til, at virksomheden forbliver firstmover af innovative kvalitetsprodukter, til kunder som kun vil have det bedste.  Har du passion for automatisering, robotter og bæredygtighed, så kan du i denne stilling bruge al din tekniske kunnen til at sikre virksomhedens position på markedet.  

Se mere på http://www.KEN.dk/ 

Stillingen  Du får mulighed for at udvikle din kvalifikationer inden for automatisering og robotteknologi. Som udgangspunkt vil din hverdag vil være præget af opgaver inden for områderne:  

  • Idégenerering 
  • Emnekonstruktioner  
  • Projekttegninger  
  • Kostpris minimering  

  Faglige kvalifikationer  

  • Du har kendskab til tyndpladekonstruktion  
  • Du har tidligere arbejdet med både elektronik og mekanik  
  • Du er en erfaren 3D konstruktør  
  • Du behersker teknisk engelsk i skrift og tale 
  • Du er uddannet teknisk designer, konstruktør, ingeniør, automationsteknolog eller maskinmester. Tøv ikke med at ansøge, hvis du på anden vis har opnået viden omkring ovennævnte områder  

Personlig profil 
Du tænker ud af boksen når maskiner skal udvikles og forbedres og sætter spørgsmålstegn til den konventionelle måde at tænke maskinopbygning på. Du er detaljeorienteret, omhyggelig og sætter ære i at videregive kvalitet. Du er vedholdende, proaktiv og sørger for at deadlines overholdes. Du motiveres af at kvalitetsforbedre produkter og trives i en afvekslende hverdag.   

Du tilbydes 
At blive en del af en velrenommeret virksomhed i processen af ekspansion og med et højt ambitionsniveau. Du vil have din daglige gang i et uformelt miljø, med høj faglig stolthed og mulighed for vidensdeling med nogle tunge udviklere som kan deres kram i en organisation, hvor du vil blive set og taget hånd om både i forhold til din personlige og faglige udvikling.    
Ansøgning mærket ref.: 2166  

Hvis du er klar til at blive fagligt og menneskeligt udfordret, og mener jobbet svarer til dine kvalifikationer og jobønsker, hører vi meget gerne fra dig. Stillingen skal besættes hurtigst muligt, men vi venter gerne på den rigtige kandidat.   

Har du spørgsmål, er du velkommen til at kontakte Jørn Ravn på tlf.: 2483 6084   

Vi ser frem til at modtage din ansøgning   

Med venlig hilsen 

F10 Human Resource     
Følg F10 Human Resource på www.linkedin.com/company/f10-hr-&-rekruttering 

2019-08-30T00:50:56.533 Konstruktør - med evne, vilje og kunnen til at skabe det næste nye på markedet Virksomheden KEN HYGIENE SYSTEMS er en innovativ virksomhed med over 70 års erfaring inden for udvikling, produktion, salg og servicerings af opvaskemaskiner til laboratorier, hospitaler, storkøkkener og fødevareindustrien. Virksomheden tilbyder et bredt program af standardløsninger og udvikler specialløsninger til individuelle formål. KEN indtager i dag en ledende position på det skandinaviske marked og har egne salgsselskaber i Sverige og Norge. Størstedelen af produktionen afsættes til eksportmarkeder gennem et vidtforgrenet forhandlernet, og ud over samhandel med en række europæiske markeder eksporterer KEN til flere mellemøstlige lande samt til oversøiske markeder som Japan og Australien. KEN HYGIENE SYSTEMS er inde i en spændende udvikling, hvor kravene til nye produkter og løsninger er i fokus. Med en blanding af både standard og kundespecifikke løsninger, er virksomheden en legeplads til teknikeren som vil udfordre sin faglige fantasi og bidrage til, at virksomheden forbliver firstmover af innovative kvalitetsprodukter, til kunder som kun vil have det bedste. Har du passion for automatisering, robotter og bæredygtighed, så kan du i denne stilling bruge al din tekniske kunnen til at sikre virksomhedens position på markedet. Se mere på http: www.KEN.dk Stillingen Du får mulighed for at udvikle din kvalifikationer inden for automatisering og robotteknologi. Som udgangspunkt vil din hverdag vil være præget af opgaver inden for områderne: Id generering Emnekonstruktioner Projekttegninger Kostpris minimering Faglige kvalifikationer Du har kendskab til tyndpladekonstruktion Du har tidligere arbejdet med både elektronik og mekanik Du er en erfaren 3D konstruktør Du behersker teknisk engelsk i skrift og tale Du er uddannet teknisk designer, konstruktør, ingeniør, automationsteknolog eller maskinmester. Tøv ikke med at ansøge, hvis du på anden vis har opnået viden omkring ovennævnte områder Personlig profil Du tænker ud af boksen når maskiner skal udvikles og forbedres og sætter spørgsmålstegn til den konventionelle måde at tænke maskinopbygning på. Du er detaljeorienteret, omhyggelig og sætter ære i at videregive kvalitet. Du er vedholdende, proaktiv og sørger for at deadlines overholdes. Du motiveres af at kvalitetsforbedre produkter og trives i en afvekslende hverdag. Du tilbydes At blive en del af en velrenommeret virksomhed i processen af ekspansion og med et højt ambitionsniveau. Du vil have din daglige gang i et uformelt miljø, med høj faglig stolthed og mulighed for vidensdeling med nogle tunge udviklere som kan deres kram i en organisation, hvor du vil blive set og taget hånd om både i forhold til din personlige og faglige udvikling. Ansøgning mærket ref.: 2166 Hvis du er klar til at blive fagligt og menneskeligt udfordret, og mener jobbet svarer til dine kvalifikationer og jobønsker, hører vi meget gerne fra dig. Stillingen skal besættes hurtigst muligt, men vi venter gerne på den rigtige kandidat. Har du spørgsmål, er du velkommen til at kontakte Jørn Ravn på tlf.: 2483 6084 Vi ser frem til at modtage din ansøgning Med venlig hilsen F10 Human Resource Følg F10 Human Resource på www.linkedin.com company f10-hr- -rekruttering11jobnet2d34a286100000000000IDK_OFIR_02DKDanmark228DKK2019-08-29T00:00:000000https://candidate.hr-manager.net/ApplicationInit.aspx?cid=1616&ProjectId=144739&DepartmentId=18971&MediaId=5&SkipAdvertisement=False0EuropaDanmarkFyn & Sydfynske øerFynOdense3557774F10 Human Resource ApS11Hollufgårds Allé 25220Odense SØDKDanmark0DKDanmarkDKDanmark8Fuldtid46Permanent788830JobNet5014868501486810004-07-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=2d34a286https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=2d34a286https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=2d34a286&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=2d34a286&page=EmailApplyForm&component=SendApplicationButtonMaskiningeniør, Maskinmester eller lign.1Dansk3Læse/ tale214501Maskiningeniør20Ingeniør og naturvidenskab362173983noreply@ofir.comDKDanmarkDKDanmark330147479Mechanical Development Engineer, Odense, DenmarkRobot Are you an experienced mechanical engineer within product development? Do you thrive of converting ideas into reality and improve existing products? Then you might be our new Mechanical Development Engineer. We offer an exciting job in a dynamic and fast-growing company with the opportunity of working alongside highly skilled and talented colleagues in our R D Hardware team. Design for the future In our Hardware team you will be focusing on developing new products for an exciting market and improve our current line-up to constantly improve our products and create value for our customers. At Universal Robots we are continuously improving both our products and the surrounding processes. This means you will, as our new Development Engineer, have plenty of opportunities to contribute to our product development processes and thereby ensuring our path towards a world-class engineering department. In this role, you design for the future by: Developing future products for the market Improve our current products for production, quality and cost. Use and improve our processes and procedures. Develop tools to help ensure design verification. You will be a part of our R D department in Odense. Who are we looking for? Our passionate R D colleagues exercise a high level of competence and you must too in your day-to-day tasks. You are driven by an eagerness to develop both superior solutions and your own engineering skills. To succeed, we imagine you come with: B.Sc. or M.Sc. in mechanical engineering with 3-5 years of relevant R D experience Strong fundamental knowledge within Mechanical engineering and machine design Strong in 3D and 2D construction (we are currently using SolidWorks) Experience with robust design and design specifications, e.g. FMEA, DFM, DFA Preferably knowledge of test setup and verification validation methodologies As English is our corporate language, fluency is a must. Danish is a plus, but not required. Ready to apply? Send your application using the link. We take candidates into the recruitment process on a continuous basis and therefore encourage you to apply as soon as possible. Join Universal Robots We are Universal Robots, a diverse group of smart, creative people working at the forefront of collaborative robotics. Together, we find innovative solutions to some of the most important manufacturing issues facing businesses today. And we dare to do what others find impossible working towards making bleeding edge technologies a reality for businesses of all sizes. Through our resolve and facts-driven engineering, we are constantly developing new solutions to empower people. Join us as Mechanical Development Engineer, and you can too.

Are you an experienced mechanical engineer within product development? Do you thrive of converting ideas into reality and improve existing products? Then you might be our new Mechanical Development Engineer.

We offer an exciting job in a dynamic and fast-growing company with the opportunity of working alongside highly skilled and talented colleagues in our R&D Hardware team.

Design for the future

In our Hardware team you will be focusing on developing new products for an exciting market and improve our current line-up to constantly improve our products and create value for our customers.

At Universal Robots we are continuously improving both our products and the surrounding processes. This means you will, as our new Development Engineer, have plenty of opportunities to contribute to our product development processes and thereby ensuring our path towards a world-class engineering department.

In this role, you design for the future by:

  • Developing future products for the market
  • Improve our current products for production, quality and cost.
  • Use and improve our processes and procedures.
  • Develop tools to help ensure design verification.

You will be a part of our R&D department in Odense.

Who are we looking for?

Our passionate R&D colleagues exercise a high level of competence and you must too in your day-to-day tasks. You are driven by an eagerness to develop both superior solutions and your own engineering skills.

To succeed, we imagine you come with:

  • B.Sc. or M.Sc. in mechanical engineering with 3-5 years of relevant R&D experience
  • Strong fundamental knowledge within Mechanical engineering and machine design
  • Strong in 3D and 2D construction (we are currently using SolidWorks)
  • Experience with robust design and design specifications, e.g. FMEA, DFM, DFA
  • Preferably knowledge of test setup and verification/validation methodologies

As English is our corporate language, fluency is a must. Danish is a plus, but not required.

Ready to apply?

Send your application using the link. We take candidates into the recruitment process on a continuous basis and therefore encourage you to apply as soon as possible.

Join Universal Robots

We are Universal Robots, a diverse group of smart, creative people working at the forefront of collaborative robotics.

Together, we find innovative solutions to some of the most important manufacturing issues facing businesses today. And we dare to do what others find impossible – working towards making bleeding edge technologies a reality for businesses of all sizes.

Through our resolve and facts-driven engineering, we are constantly developing new solutions to empower people. Join us as Mechanical Development Engineer, and you can too.

Universal Robots A/SOdense S2019-12-23T00:00:002020-02-14T00:00:00
330136397Konstruktør/UdviklingsingeniørRobot OM STILLINGEN Din væsentligste opgave bliver konstruktion af løsninger til industrien og aktuelt hospitalssektoren i tæt samarbejde med virksomhedens sælgere, programmører og projektledere. Du vil komme til at sidde i Research Development, hvor du skal arbejde selvstændigt såvel som i teams, og du vil blive stillet overfor faglige udfordringer, hvor al din viden og ekspertise vil blive anvendt, udfordret og udviklet. Du og dine kolleger har en indgående interesse for mekanik og produktion, samt et engagement og en høj faglighed som dagligt kommer i spil i forhold til udvikling og design af kundetilpassede løsninger af høj kvalitet. Du vil arbejde med kundespecifikke projekter i tæt samarbejde med softwareafdelingen, kunderne, underleverandører og montageafdelingen. Som ny konstruktør skal du være med til at sikre virksomhedens position som markedsledende indenfor udvikling af højteknologiske bearbejdningsanlæg og kundetilpassede automationsløsninger til mange forskellige brancher. OM DIG Vi forventer, at du: Har gerne erfaring fra maskin- eller automationsbranchen (ikke ultimativt krav) Har en uddannelsesmæssig baggrund som maskiningeniør, maskintekniker, produktionsteknolog eller lignende Har indgående erfaring som konstruktør af tekniske løsninger Har indgående erfaring med PLC og anden styring af tekniske løsninger Har kendskab til robotteknologi og robotapplikationer Har en struktureret arbejdsform og har tilegnet dig et indgående kendskab til 3D-programmer som eksempelvis Inventor. Trives i en flad organisation og kan skabe tillid blandt kolleger og samarbejdspartnere gennem en løsningsorienteret tilgang til opgaver og udfordringer. Er innovativ, kan tænke ud af boksen og kan bringe nye ideer ind i organisationen. SPROG Dansk flydende Engelsk gerne flydende i skrift og tale og gerne tysk i tale DU FÅR Du får en spændende position i en dynamisk automationsvirksomhed med succes, blandt andet inden for hospitalssektoren og med mange store projekter undervejs. Det er netop Research Development& 39 s evne til at levere de rette løsninger, der er og bliver fundamentet for den nuværende og fremtidige succes. Research Development består af ca. 12 engagerede medarbejdere, og du bliver en del af et veletableret team, der igennem værdifuld sparring giver dig mulighed for både faglig og personlig udvikling fremover. Din hverdag vil være præget af stor faglig kontaktflade på tværs af virksomheden. Gibotech er præget af en uformel kultur, der skaber glæde og innovation og samtidigt afføder store ambitioner og stolthed ved arbejdet og de resultater, der skabes i fællesskab. GAGEPAKKE Løn- og ansættelsesvilkår forhandles individuelt og modsvarer de stillede krav til kvalifikationer og erfaring. STARTTIDSPUNKT Snarest muligt

OM STILLINGEN

Din væsentligste opgave bliver konstruktion af løsninger til industrien og aktuelt hospitalssektoren i tæt samarbejde med virksomhedens sælgere, programmører og projektledere.

Du vil komme til at sidde i Research & Development, hvor du skal arbejde selvstændigt såvel som i teams, og du vil blive stillet overfor faglige udfordringer, hvor al din viden og ekspertise vil blive anvendt, udfordret og udviklet.

Du og dine kolleger har en indgående interesse for mekanik og produktion, samt et engagement og en høj faglighed som dagligt kommer i spil i forhold til udvikling og design af kundetilpassede løsninger af høj kvalitet.

Du vil arbejde med kundespecifikke projekter i tæt samarbejde med softwareafdelingen, kunderne, underleverandører og montageafdelingen.

Som ny konstruktør skal du være med til at sikre virksomhedens position som markedsledende indenfor udvikling af højteknologiske bearbejdningsanlæg og kundetilpassede automationsløsninger til mange forskellige brancher.

OM DIG

Vi forventer, at du:

  • Har gerne erfaring fra maskin- eller automationsbranchen – (ikke ultimativt krav)
  • Har en uddannelsesmæssig baggrund som maskiningeniør, maskintekniker, produktionsteknolog eller lignende
  • Har indgående erfaring som konstruktør af tekniske løsninger
  • Har indgående erfaring med PLC og anden styring af tekniske løsninger
  • Har kendskab til robotteknologi og robotapplikationer
  • Har en struktureret arbejdsform og har tilegnet dig et indgående kendskab til 3D-programmer som eksempelvis Inventor.
  • Trives i en flad organisation og kan skabe tillid blandt kolleger og samarbejdspartnere gennem en løsningsorienteret tilgang til opgaver og udfordringer.
  • Er innovativ, kan tænke ud af boksen og kan bringe nye ideer ind i organisationen.

SPROG

Dansk – flydende

Engelsk gerne flydende i skrift og tale og gerne tysk i tale

DU FÅR

Du får en spændende position i en dynamisk automationsvirksomhed med succes, blandt andet inden for hospitalssektoren og med mange store projekter undervejs. Det er netop Research & Development's evne til at levere de rette løsninger, der er og bliver fundamentet for den nuværende og fremtidige succes.

Research & Development består af ca. 12 engagerede medarbejdere, og du bliver en del af et veletableret team, der igennem værdifuld sparring giver dig mulighed for både faglig og personlig udvikling fremover.

Din hverdag vil være præget af stor faglig kontaktflade på tværs af virksomheden. Gibotech er præget af en uformel kultur, der skaber glæde og innovation og samtidigt afføder store ambitioner og stolthed ved arbejdet og de resultater, der skabes i fællesskab.

GAGEPAKKE

Løn- og ansættelsesvilkår forhandles individuelt og modsvarer de stillede krav til kvalifikationer og erfaring.

STARTTIDSPUNKT

Snarest muligt

Gibotech A/SOdense SØ2019-12-06T00:00:002020-01-29T00:00:00
330159404Engineering Research Support position in the SDU Biorobotics unitRobot The Maersk Mc-Kinney Moller Institute, University of Southern Denmark, invites applications for a mechanical engineering research assistant position. The position is available from 1st March 2020, based in Odense, and is a permanent technical support position. The position is based in the SDU Biorobotics unit and will support the unit s existing research and teaching activities in bio-inspired robotics, bio-robotics, medical robotics and embedded systems. The unit has a lively programme of research in bio-robotics, with lizards, frogs, dung beetles and bats as the key animal models we also work on legged robots based on bio-inspired principles inspired by insects and construction of bespoke robotic devices, such as camera pill robots and other embedded electronic devices for ourselves and other units at SDU. The unit s participation in the robotics and UAS educations, as well as its involvement in supporting the Learning and Experience Technology programme, frequently results in the need for new technology for teaching and research. The unit has excellent technical support and a history of building unusual and interesting experimental robots. It has a strong collaboration with other SDU units such as Robotics, Electronics and the UAS Centre. Creating unusual and interesting experimental robots requires a variety of technical expertise in electronics, mechanical engineering, embedded programming and mechatronics. We seek a technically-oriented staff member to support the unit in the mechanical engineering components of these areas. Responsibilities and tasks We seek a talented and enthusiastic engineer to assist us in the design and construction of our novel robot systems. We envisage a mechanical structure designer and builder, whose focus will be on the design and construction of robot bodies, including preparation of mechanical designs and drawings, liaising with the mechanical workshop, fabrication of prototypes, commissioning of external fabrication tasks, assisting with managing 3D printing activities in the unit. The successful candidate will also provide support to the new Soft Robotics Centre, working with a variety of 3D fast-prototyping and manufacturing technologies. Preferred applicants have: - An M. Sc. degree in a relevant engineering discipline: robotics, mechanical engineering or mechatronics, or equivalent - Experience with construction and programming of robotic prototypes - Experience of assisting research staff with the specification and design of experimental structures - Interest in supporting bachelor and master level student projects, as well as the research staff - Experience of interacting with external fabricators - specification and management of external tasks For more information about these positions, please contact Professor John Hallam, john@mmmi.sdu.dk, Phone: 65503546 or Professor Anders Lyhne Christensen, andc@mmmi.sdu.dk, Phone: 65507324. The successful applicant will be employed in accordance with the agreement between the Ministry of Finance and AC (the Danish Confederation of Professional Associations). Applications must be submitted online by using http: sdu.dk servicenavigation right ledige_stillinger jobs Tap. Attached files must be in Adobe PDF or Word format. Each box can only contain a single file of max. 10 Mb. We recommend that you read how to apply before you apply. The University wishes our staff to reflect the diversity of society and thus welcomes applications from all qualified candidates regardless of personal background.

The Maersk Mc-Kinney Moller Institute, University of Southern Denmark, invites applications for a mechanical engineering research assistant position.  The position is available from 1st March 2020, based in Odense, and is a permanent technical support position.

The position is based in the SDU Biorobotics unit and will support the unit's existing research and teaching activities in bio-inspired robotics, bio-robotics, medical robotics and embedded systems.  The unit has a lively programme of research in bio-robotics, with lizards, frogs, dung beetles and bats as the key animal models;  we also work on legged robots based on bio-inspired principles inspired by insects and construction of bespoke robotic devices, such as camera pill robots and other embedded electronic devices for ourselves and other units at SDU. The unit's participation in the robotics and UAS educations, as well as its involvement in supporting the Learning and Experience Technology programme, frequently results in the need for new technology for teaching and research. The unit has excellent technical support and a history of building unusual and interesting experimental robots.  It has a strong collaboration with other SDU units such as Robotics, Electronics and the UAS Centre.

Creating unusual and interesting experimental robots requires a variety of technical expertise in electronics, mechanical engineering, embedded programming and mechatronics.  We seek a technically-oriented staff member to support the unit in the mechanical engineering components of these areas.

Responsibilities and tasks

We seek a talented and enthusiastic engineer to assist us in the design and construction of our novel robot systems.  We envisage a mechanical structure designer and builder, whose focus will be on the design and construction of robot bodies, including preparation of mechanical designs and drawings, liaising with the mechanical workshop, fabrication of prototypes, commissioning of external fabrication tasks, assisting with managing 3D printing activities in the unit.  The successful candidate will also provide support to the new Soft Robotics Centre, working with a variety of 3D fast-prototyping and manufacturing technologies.

Preferred applicants have:

- An M. Sc. degree in a relevant engineering discipline: robotics,
  mechanical engineering or mechatronics, or equivalent
- Experience with construction and programming of robotic prototypes
- Experience of assisting research staff with the specification and design
  of experimental structures
- Interest in supporting bachelor and master level student projects, as
  well as the research staff
- Experience of interacting with external fabricators - specification and
  management of external tasks

For more information about these positions, please contact Professor John Hallam, john@mmmi.sdu.dk, Phone: 65503546 or Professor Anders Lyhne Christensen, andc@mmmi.sdu.dk, Phone: 65507324.

The successful applicant will be employed in accordance with the agreement between the Ministry of Finance and AC (the Danish Confederation of Professional Associations).  

Applications must be submitted online by using http://sdu.dk/servicenavigation/right/ledige_stillinger/jobs/Tap.

Attached files must be in Adobe PDF or Word format.

Each box can only contain a single file of max. 10 Mb.

We recommend that you read how to apply before you apply.

The University wishes our staff to reflect the diversity of society and thus welcomes applications from all qualified candidates regardless of personal background.

 

Syddansk UniversitetOdense M2020-01-17T00:00:002020-02-08T00:00:00
330157315Senior Design Engineer - Mechatronics or ElectricalRobot Would you like to be a part of Denmark s fastest growing SatCom start-up? QuadSAT ApS develops UAV-based RF payloads for satellite antenna tests and calibration. QuadSAT has recently been receiving international recognition with market leaders in the SatCom industry and the European Space Agency. About QuadSAT QuadSAT is a start-up company founded in 2017, located at the UAS test facility site at HCA Airport in Odense. QuadSAT develops UAS payload systems and testing techniques to challenge current expensive test range alternatives for SatCom antenna manufacturers, satellite operator, and service providers. QuadSAT currently has 10 employees, most of whom are internationals. A Unique Engineering Opportunity QuadSAT is looking for an experienced engineer who will be responsible for designing and building the next generation of UAV antenna performance evaluation payloads. You will be part of a young and international team of enthusiastic engineers in a fast and agile product development environment. At QuadSAT there is space to be creative and make a big impact with your skills and knowledge. QuadSAT is searching for a senior design engineer with experience in mechanical design and electrical harness design. The ideal candidate will have the practical skills required to build prototypes and products, which includes a knowledge of assembly, wiring, soldering, microcontrollers, and instrumentation. In this role, you will be responsible for multiple aspects of product design of UAV payloads including: Sourcing of parts for prototypes and payloads. Electrical harness design. 3D printing and CNC machining of parts. Manufacture of low volume prototype and products. Calibration and testing of UAV payload performance. CAD Design. Integration of microcontrollers. Bill of materials. Documentation and test reports. QuadSAT is an international company with customers all over the world. It is expected that you may need to travel for 20-30 working days per year in this position. Your Personality Is Important To Us We are searching for a candidate who is driven by the curiosity to create and develop new designs and solutions with a high-quality outcome. You should be detail-oriented but also have the scope to step back and look at the big picture. The environment of a start-up can be demanding with occasional short deadlines, so you must be able to cope with agile and fast-moving product development cycles. Our ideal candidate will have: Minimum 2 years professional experience related to product development. Bachelor or Masters in either Mechanical, Mechatronics, Robotics or Electrical Engineering. Minimum 2 years of experience with soldering, assembly, microcontrollers and instrumentation. Excellent English language proficiency. Clean criminal record certificate for access to the HCA Airport. It is an advantage to also have experience with: CAD software such as SolidWorks. Coding such as Python and C . Ardupilot Mavlink and DJI API. Drone flight. Gimbal controllers such as SimpleBGC. SatCom knowledge. RF knowledge. 3D printing and CNC machining. What We Can Offer You At QuadSAT, we offer a dynamic work environment with flexible working hours and the possibility to work how you like. You will be working in an environment with a lot of young people and lots of social activities outside working hours. In this position you will get a high amount of responsibility and the possibility to shape your future workplace. Want To Join Us? If you think this position sounds right for you, please do not hesitate to send your resume through to jobs@quadsat.com. If you have any questions about this position, please contact either Rasmus Gupta (rg@quadsat.com) or Andrian Buchi (ab@quadsat.com). Application deadline: As soon as possible

Would you like to be a part of Denmark’s fastest growing SatCom start-up? QuadSAT ApS develops UAV-based RF payloads for satellite antenna tests and calibration. QuadSAT has recently been receiving international recognition with market leaders in the SatCom industry and the European Space Agency.

About QuadSAT

QuadSAT is a start-up company founded in 2017, located at the UAS test facility site at HCA Airport in Odense. QuadSAT develops UAS payload systems and testing techniques to challenge current expensive test range alternatives for SatCom antenna manufacturers, satellite operator, and service providers. QuadSAT currently has 10 employees, most of whom are internationals.

A Unique Engineering Opportunity

QuadSAT is looking for an experienced engineer who will be responsible for designing and building the next generation of UAV antenna performance evaluation payloads. You will be part of a young and international team of enthusiastic engineers in a fast and agile product development environment. At QuadSAT there is space to be creative and make a big impact with your skills and knowledge.

QuadSAT is searching for a senior design engineer with experience in mechanical design and electrical harness design. The ideal candidate will have the practical skills required to build prototypes and products, which includes a knowledge of assembly, wiring, soldering, microcontrollers, and instrumentation.

In this role, you will be responsible for multiple aspects of product design of UAV payloads including:

  • Sourcing of parts for prototypes and payloads.
  • Electrical harness design.
  • 3D printing and CNC machining of parts.
  • Manufacture of low volume prototype and products.
  • Calibration and testing of UAV payload performance.
  • CAD Design.
  • Integration of microcontrollers.
  • Bill of materials.
  • Documentation and test reports.

QuadSAT is an international company with customers all over the world. It is expected that you may need to travel for 20-30 working days per year in this position.

Your Personality Is Important To Us

We are searching for a candidate who is driven by the curiosity to create and develop new designs and solutions with a high-quality outcome. You should be detail-oriented but also have the scope to step back and look at the big picture. The environment of a start-up can be demanding with occasional short deadlines, so you must be able to cope with agile and fast-moving product development cycles.

Our ideal candidate will have:

  • Minimum 2 years professional experience related to product development.
  • Bachelor or Masters in either Mechanical, Mechatronics, Robotics or Electrical Engineering.
  • Minimum 2 years of experience with soldering, assembly, microcontrollers and instrumentation.
  • Excellent English language proficiency.
  • Clean criminal record certificate for access to the HCA Airport.

It is an advantage to also have experience with:

  • CAD software such as SolidWorks.
  • Coding such as Python and C++.
  • Ardupilot/Mavlink and DJI API.
  • Drone flight.
  • Gimbal controllers such as SimpleBGC.
  • SatCom knowledge.
  • RF knowledge.
  • 3D printing and CNC machining.

What We Can Offer You

At QuadSAT, we offer a dynamic work environment with flexible working hours and the possibility to work how you like. You will be working in an environment with a lot of young people and lots of social activities outside working hours. In this position you will get a high amount of responsibility and the possibility to shape your future workplace.

Want To Join Us?

If you think this position sounds right for you, please do not hesitate to send your resume through to jobs@quadsat.com.

If you have any questions about this position, please contact either Rasmus Gupta (rg@quadsat.com) or Andrian Buchi (ab@quadsat.com).

Application deadline:
As soon as possible

QuadSAT ApSOdense N2020-01-15T00:00:002020-02-01T00:00:00
da-DK

Andre job der matcher din søgning

Mechanical Development Engineer, Odense, Denmark

Universal Robots A/S

Odense S
Are you an experienced mechanical engineer within product development? Do you thrive of converting ideas into reality and improve existing products? Then you might be our new Mechanical Development Engineer. We offer an exciting job in a dynamic and...
Indrykket:23. december 2019

Konstruktør/Udviklingsingeniør

Gibotech A/S

Odense SØ
OM STILLINGEN Din væsentligste opgave bliver konstruktion af løsninger til industrien og aktuelt hospitalssektoren i tæt samarbejde med virksomhedens sælgere, programmører og projektledere. Du vil komme til at sidde i Research Development, hvor du s...
Indrykket:6. december 2019

Engineering Research Support position in the SDU Biorobotics unit

Syddansk Universitet

Odense M
The Maersk Mc-Kinney Moller Institute, University of Southern Denmark, invites applications for a mechanical engineering research assistant position. The position is available from 1st March 2020, based in Odense, and is a permanent technical suppor...
Indrykket:17. januar 2020

Senior Design Engineer - Mechatronics or Electrical

QuadSAT ApS

Odense N
Would you like to be a part of Denmark s fastest growing SatCom start-up? QuadSAT ApS develops UAV-based RF payloads for satellite antenna tests and calibration. QuadSAT has recently been receiving international recognition with market leaders in th...
Indrykket:15. januar 2020