Control & Load Engineer for DEIF's wind team in Denmark

As the leading company in the development of retrofit solutions for wind turbines, DEIF increases efficiency of renewable energy by applying new technologies on existing wind turbine platforms. Would you like to be part of a team implementing solutions based on smart control and load management strategies, machine learning and professional software environments for our global customers? With our wind team located in Skive, Odense, Silkeborg and Klagenfurt (Austria), DEIF is looking for a Control & Load Engineer to join our team at one of our locations in Denmark. The position can have a main focus on either control or loads.

Your primary work tasks will include:

  • Optimise the performance of wind turbines with innovative control strategies, considering the limits of mechanical and electrical loads
  • Design new control strategies
  • Calculate and optimise the fatigue and extreme loads in wind turbines
  • Review and optimise wind turbine performance based on big data sets and evaluate improvements jointly with other colleagues or customers directly
  • Define requirements for wind turbine software developers
  • Sales support on explaining controls, optimisations or loads to customers
  • Run measurement campaigns to optimise the turbine’s performance
  • Depending on your interest and a given opportunity, you can also take the role as technical project manager or you can design completely new wind turbine upgrade kits

Qualifications
We are looking for a passionate Control & Load Engineer who seeks to continuously improve his/her skills and adapt to new technical challenges.

Mandatory:

  • Master or PhD within the fields of physics, renewable energy, controls, electric engineering, thermodynamics, aerodynamics, mechanical engineering or similar
  • Knowledge in the design of control strategies
  • Basic experience in data- and performance analysis
  • Handling of Matlab or similar tools
  • Basic knowledge about mechanical loads and drive trains
  • Experience in working in or designing of wind turbines
  • Ability to work in heights

Preferred:

  • Programming experience in Python, C++, Fortran or similar
  • Mechanical engineering
  • Wind turbine load evaluation systems like Bladed, Flex or OpenFast
  • Design electrical solutions, drive trains, power converters, generators
  • Mechatronics or robotics
  • Experience in requirement specification, review as well as test and validation on various simulation platforms and prepare software release procedures
  • Ability to work abroad for a longer period at a time

For the position, we are looking for a candidate who possesses good communication skills, is fluent in English in both writing and speech and who perhaps knows other languages as well (e.g. German, Danish, Chinese, French, Italian, Spanish etc.) – a person who holds an international mindset and who would thrive with international travels.

We offer a professional and motivating work environment at one of our offices in Denmark (Odense, Skive or Silkeborg), all of which are located in scenic surroundings and with great employee benefits that include lunch canteen, free fruit and drinks as well as flexible office hours and home-office options for greater work-life balance.

What can you expect to find at DEIF?
The core of our values is respect for the individual, ambition to become better at all times, and an understanding of our organisation as a whole. We believe that the values grow best in an informal working environment characterised by freedom with responsibility and a flat organisational structure, where many tasks are performed in close cooperation across the organisation.

DEIF is very concerned with corporate social responsibility as well as social responsibility, and we have a very special focus on sustainability. We have introduced our own code of conduct, which is based on internationally recognised conventions on human rights, labour rights, safety & environment and anti-corruption.

Maybe that is why DEIF came in second in the national competition to become the best workplace in Denmark in 2017 at the 3F labour union’s business & growth conference ‘Vision Denmark’, a competition where organisations are nominated by employees only.

Interested?
Send your application and CV as soon as possible.

About DEIF
Established in Denmark in 1933, today the DEIF Group is a global market leader in green, safe and reliable control solutions for decentralised power production on land and at sea. Put a little simpler, we make sure that the power never goes out.

The DEIF Group is privately owned by the founder's son, Toke Foss, and today DEIF has more than 630 employees and is represented in over 50 key markets. 20 % of our employees work within R&D identifying new environmentally friendly ways of reducing maintenance expenses and fuel consumption for the world’s power generating industries. We call it: POWER EFFICIENCY.

 


Du har ikke vedlagt dokumenter til din ansøgning. Klik på 'OK' knappen nedenfor for at sende din ansøgning alligevel, eller klik på knappen "Annuller" og vedhæft dokumenter, før du sender din ansøgning igen.

Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330034685Phoenix-b0a93a4612019-06-04T00:00:00Control & Load Engineer for DEIF's wind team in Denmark

As the leading company in the development of retrofit solutions for wind turbines, DEIF increases efficiency of renewable energy by applying new technologies on existing wind turbine platforms. Would you like to be part of a team implementing solutions based on smart control and load management strategies, machine learning and professional software environments for our global customers? With our wind team located in Skive, Odense, Silkeborg and Klagenfurt (Austria), DEIF is looking for a Control & Load Engineer to join our team at one of our locations in Denmark. The position can have a main focus on either control or loads.

Your primary work tasks will include:

  • Optimise the performance of wind turbines with innovative control strategies, considering the limits of mechanical and electrical loads
  • Design new control strategies
  • Calculate and optimise the fatigue and extreme loads in wind turbines
  • Review and optimise wind turbine performance based on big data sets and evaluate improvements jointly with other colleagues or customers directly
  • Define requirements for wind turbine software developers
  • Sales support on explaining controls, optimisations or loads to customers
  • Run measurement campaigns to optimise the turbine’s performance
  • Depending on your interest and a given opportunity, you can also take the role as technical project manager or you can design completely new wind turbine upgrade kits

Qualifications
We are looking for a passionate Control & Load Engineer who seeks to continuously improve his/her skills and adapt to new technical challenges.

Mandatory:

  • Master or PhD within the fields of physics, renewable energy, controls, electric engineering, thermodynamics, aerodynamics, mechanical engineering or similar
  • Knowledge in the design of control strategies
  • Basic experience in data- and performance analysis
  • Handling of Matlab or similar tools
  • Basic knowledge about mechanical loads and drive trains
  • Experience in working in or designing of wind turbines
  • Ability to work in heights

Preferred:

  • Programming experience in Python, C++, Fortran or similar
  • Mechanical engineering
  • Wind turbine load evaluation systems like Bladed, Flex or OpenFast
  • Design electrical solutions, drive trains, power converters, generators
  • Mechatronics or robotics
  • Experience in requirement specification, review as well as test and validation on various simulation platforms and prepare software release procedures
  • Ability to work abroad for a longer period at a time

For the position, we are looking for a candidate who possesses good communication skills, is fluent in English in both writing and speech and who perhaps knows other languages as well (e.g. German, Danish, Chinese, French, Italian, Spanish etc.) – a person who holds an international mindset and who would thrive with international travels.

We offer a professional and motivating work environment at one of our offices in Denmark (Odense, Skive or Silkeborg), all of which are located in scenic surroundings and with great employee benefits that include lunch canteen, free fruit and drinks as well as flexible office hours and home-office options for greater work-life balance.

What can you expect to find at DEIF?
The core of our values is respect for the individual, ambition to become better at all times, and an understanding of our organisation as a whole. We believe that the values grow best in an informal working environment characterised by freedom with responsibility and a flat organisational structure, where many tasks are performed in close cooperation across the organisation.

DEIF is very concerned with corporate social responsibility as well as social responsibility, and we have a very special focus on sustainability. We have introduced our own code of conduct, which is based on internationally recognised conventions on human rights, labour rights, safety & environment and anti-corruption.

Maybe that is why DEIF came in second in the national competition to become the best workplace in Denmark in 2017 at the 3F labour union’s business & growth conference ‘Vision Denmark’, a competition where organisations are nominated by employees only.

Interested?
Send your application and CV as soon as possible.

About DEIF
Established in Denmark in 1933, today the DEIF Group is a global market leader in green, safe and reliable control solutions for decentralised power production on land and at sea. Put a little simpler, we make sure that the power never goes out.

The DEIF Group is privately owned by the founder's son, Toke Foss, and today DEIF has more than 630 employees and is represented in over 50 key markets. 20 % of our employees work within R&D identifying new environmentally friendly ways of reducing maintenance expenses and fuel consumption for the world’s power generating industries. We call it: POWER EFFICIENCY.

 

As the leading company in the development of retrofit solutions for wind turbines, DEIF increases efficiency of renewable energy by applying new technologies on existing wind turbine platforms. Would you like to be part of a team implementing solutions based on smart control and load management strategies, machine learning and professional software environments for our global customers? With our wind team located in Skive, Odense, Silkeborg and Klagenfurt (Austria), DEIF is looking for a Control Load Engineer to join our team at one of our locations in Denmark. The position can have a main focus on either control or loads. Your primary work tasks will include: Optimise the performance of wind turbines with innovative control strategies, considering the limits of mechanical and electrical loads Design new control strategies Calculate and optimise the fatigue and extreme loads in wind turbines Review and optimise wind turbine performance based on big data sets and evaluate improvements jointly with other colleagues or customers directly Define requirements for wind turbine software developers Sales support on explaining controls, optimisations or loads to customers Run measurement campaigns to optimise the turbine s performance Depending on your interest and a given opportunity, you can also take the role as technical project manager or you can design completely new wind turbine upgrade kits Qualifications We are looking for a passionate Control Load Engineer who seeks to continuously improve his her skills and adapt to new technical challenges. Mandatory: Master or PhD within the fields of physics, renewable energy, controls, electric engineering, thermodynamics, aerodynamics, mechanical engineering or similar Knowledge in the design of control strategies Basic experience in data- and performance analysis Handling of Matlab or similar tools Basic knowledge about mechanical loads and drive trains Experience in working in or designing of wind turbines Ability to work in heights Preferred: Programming experience in Python, C , Fortran or similar Mechanical engineering Wind turbine load evaluation systems like Bladed, Flex or OpenFast Design electrical solutions, drive trains, power converters, generators Mechatronics or robotics Experience in requirement specification, review as well as test and validation on various simulation platforms and prepare software release procedures Ability to work abroad for a longer period at a time For the position, we are looking for a candidate who possesses good communication skills, is fluent in English in both writing and speech and who perhaps knows other languages as well (e.g. German, Danish, Chinese, French, Italian, Spanish etc.) a person who holds an international mindset and who would thrive with international travels. We offer a professional and motivating work environment at one of our offices in Denmark (Odense, Skive or Silkeborg), all of which are located in scenic surroundings and with great employee benefits that include lunch canteen, free fruit and drinks as well as flexible office hours and home-office options for greater work-life balance. What can you expect to find at DEIF? The core of our values is respect for the individual, ambition to become better at all times, and an understanding of our organisation as a whole. We believe that the values grow best in an informal working environment characterised by freedom with responsibility and a flat organisational structure, where many tasks are performed in close cooperation across the organisation. DEIF is very concerned with corporate social responsibility as well as social responsibility, and we have a very special focus on sustainability. We have introduced our own code of conduct, which is based on internationally recognised conventions on human rights, labour rights, safety environment and anti-corruption. Maybe that is why DEIF came in second in the national competition to become the best workplace in Denmark in 2017 at the 3F labour union s business growth conference Vision Denmark , a competition where organisations are nominated by employees only. Interested? Send your application and CV as soon as possible. About DEIF Established in Denmark in 1933, today the DEIF Group is a global market leader in green, safe and reliable control solutions for decentralised power production on land and at sea. Put a little simpler, we make sure that the power never goes out. The DEIF Group is privately owned by the founder s son, Toke Foss, and today DEIF has more than 630 employees and is represented in over 50 key markets. 20 of our employees work within R D identifying new environmentally friendly ways of reducing maintenance expenses and fuel consumption for the world s power generating industries. We call it: POWER EFFICIENCY.11jobnetb0a93a46100000000000aDK_OFIR_02DKDanmark228DKK2019-07-24T00:00:000000https://www.epos.dk/Rek/Deif/Joblist/ShowJobOffer.aspx?dbalias=EposREC_Deif&lang=en&jobOfferEntityId=453&joblistId=150EuropaDanmarkJyllandVestjyllandHolstebroEuropaDanmarkJyllandVestjyllandSkiveEuropaDanmarkJyllandMidtjyllandViborg3537652DEIF A/S11Frisenborgvej 337800SkiveDKDanmark0DKDanmarkDKDanmark8Fuldtid46Permanent770398JobNet4997447499744710029-05-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=b0a93a46https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=b0a93a46https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=b0a93a46&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=b0a93a46&page=EmailApplyForm&component=SendApplicationButton1Dansk3Læse/ tale933064Energiingeniør20Ingeniør og naturvidenskab361951783noreply@ofir.comDKDanmarkDKDanmark330043870Projektingeniør til PLC/SCADA-applikationerRobot Virksomheden Vores kunde er en sund og velfungerende virksomhed med afdelinger flere steder i hele Danmark, hvor alle 100 medarbejdere arbejder engageret og kvalitetsbevidst med deres opgaver. Du får mulighed for faglige og personlige udfordringer i samspil med erfarne og dygtige kollegaer i en uformel organisation med korte beslutningsprocesser. Der er en god omgangstone, et stærkt fællesskab og højt til loftet. Virksomheden har kontorer over hele landet denne stilling kan besættes både i Midtjylland og Nordjylland. Vi søger flere dygtige PLC SCADA-specialister. Den nye medarbejder indgår i en linjeorganisation, hvor der er stort samarbejde med dygtige kolleger i de øvrige afdelinger. Vores kunde er en danskejet leverandør af tidssvarende og avancerede automationsløsninger inden for blandt andet miljø, food og pharma. De nye medarbejdere kan se frem til vidensdeling på højt niveau og gode muligheder for personlig udvikling. Virksomheden som tæller ca. 100 medarbejdere, er i god og fortsat vækst, skabt af engagerede og dygtige medarbejdere, der forstår vigtigheden af konstant at anvende de nyeste teknologier. Arbejdsområder Den nye projektingeniør bliver ansvarlig for delprojekter inden for sit ekspertiseområde, PLC og SCADA. Det betyder, at du samarbejder med virksomhedens projektledere og de øvrige deltagere i projektorganisationen for at løse opgaven og sikre stor kundetilfredshed hele vejen igennem projektet. Indimellem vil du også have mindre adhoc opgaver. Du kommer til at deltage i alle af projektets faser, lige fra indledende kundemøde, hvor vi dokumenterer, hvad kundens anlæg skal kunne, til implementering og test on-site . Du programmerer og afstemmer i de forskellige faser med kunden for at sikre den rigtige retning. Vi søger folk med erfaring, lige fra automation på rensningsanlæg til medicinalvirksomheder. Erfaring Du er uddannet el-ingeniør eller lignede og har gerne en faglig praktisk uddannelse som elektriker. Du har minimum 5 års erfaring med programmering af PLC og eller SCADA-applikationer. Erfaring med programmering af Siemens og Allan Bradley PLC er og eller iFIX, IGSS, WinCC, Wonderware og RSview SCADA-systemer er en klar fordel. Har du erfaring med programmering af MES systemer, er det også en fordel. Du behersker engelsk i skrift og tale. Derudover er det vigtigt, at du er skarp til at kommunikere både internt og eksternt. Du er systematisk og struktureret samt arbejder samvittighedsfuldt med alle dine opgaver. Endelig er du en rigtig god kollega du står altid klar til at sparre eller dele ud af din viden. Du tilbydes: En travl hverdag med en uformel omgangstone og respekt for engagement. Gode muligheder for faglig og personlig udvikling. Et godt arbejdsmiljø med et velfungerende team af motiverede kollegaer. Lønpakke der modsvarer stillingens krav. Kantine sundhedsordning. Tiltrædelse: Snarest muligt Ansøgning: For yderligere information om stillingen kontakt venligst Headhunter Michael Folmann, Effektiv Rekruttering via e-mail: mf@erhr.dk eller på tlf. 2121 6464. Indsend venligst din ansøgning og CV via vores online ansøgningsskema i højre kolonne. Ansøgningsfrist er så hurtigt som muligt.

Virksomheden

Vores kunde er en sund og velfungerende virksomhed med afdelinger flere steder i hele Danmark, hvor alle 100 medarbejdere arbejder engageret og kvalitetsbevidst med deres opgaver. Du får mulighed for faglige og personlige udfordringer i samspil med erfarne og dygtige kollegaer i en uformel organisation med korte beslutningsprocesser. Der er en god omgangstone, et stærkt fællesskab og højt til loftet. Virksomheden har kontorer over hele landet – denne stilling kan besættes både i Midtjylland og Nordjylland.

Vi søger flere dygtige PLC/SCADA-specialister.
Den nye medarbejder indgår i en linjeorganisation, hvor der er stort samarbejde med dygtige kolleger i de øvrige afdelinger. Vores kunde er en danskejet leverandør af tidssvarende og avancerede automationsløsninger inden for blandt andet miljø, food og pharma. De nye medarbejdere kan se frem til vidensdeling på højt niveau og gode muligheder for personlig udvikling. Virksomheden som tæller ca. 100 medarbejdere, er i god og fortsat vækst, skabt af engagerede og dygtige medarbejdere, der forstår vigtigheden af konstant at anvende de nyeste teknologier.

Arbejdsområder

Den nye projektingeniør bliver ansvarlig for delprojekter inden for sit ekspertiseområde, PLC og SCADA. Det betyder, at du samarbejder med virksomhedens projektledere og de øvrige deltagere i projektorganisationen for at løse opgaven og sikre stor kundetilfredshed hele vejen igennem projektet. Indimellem vil du også have mindre adhoc opgaver.
Du kommer til at deltage i alle af projektets faser, lige fra indledende kundemøde, hvor vi dokumenterer, hvad kundens anlæg skal kunne, til implementering og test ”on-site”.
Du programmerer og afstemmer i de forskellige faser med kunden for at sikre den rigtige retning.

Vi søger folk med erfaring, lige fra automation på rensningsanlæg til medicinalvirksomheder.

Erfaring

  • Du er uddannet el-ingeniør eller lignede og har gerne en faglig praktisk uddannelse som elektriker.
  • Du har minimum 5 års erfaring med programmering af PLC og/eller SCADA-applikationer.
  • Erfaring med programmering af Siemens og Allan Bradley PLC’er og/eller iFIX, IGSS, WinCC, Wonderware og RSview SCADA-systemer er en klar fordel.
  • Har du erfaring med programmering af MES systemer, er det også en fordel.
  • Du behersker engelsk i skrift og tale.

Derudover er det vigtigt, at du er skarp til at kommunikere både internt og eksternt. Du er systematisk og struktureret samt arbejder samvittighedsfuldt med alle dine opgaver. Endelig er du en rigtig god kollega – du står altid klar til at sparre eller dele ud af din viden.

Du tilbydes:

  • En travl hverdag med en uformel omgangstone og respekt for engagement.
  • Gode muligheder for faglig og personlig udvikling.
  • Et godt arbejdsmiljø med et velfungerende team af motiverede kollegaer.
  • Lønpakke der modsvarer stillingens krav.
  • Kantine + sundhedsordning.

Tiltrædelse:

Snarest muligt

Ansøgning:

For yderligere information om stillingen kontakt venligst Headhunter Michael Folmann, Effektiv Rekruttering via e-mail: mf@erhr.dk eller på tlf. 2121 6464.

Indsend venligst din ansøgning og CV via vores online ansøgningsskema i højre kolonne.

Ansøgningsfrist er så hurtigt som muligt.

Effektiv RekrutteringSilkeborg2019-06-18T00:00:002019-08-14T00:00:00
330060808Manager SCADA EngineeringRobot Are you ready to take the next step on your career leading a team of SCADA Engineers and Specialists for a global leader the innovation and manufacturing of sustainable energy solutions? Are you a people manager who knows how to motivate and get the best from your team? Due to continued growth, we now have an opportunity for a Manager of SCADA Engineering to join our team in Denmark. Service Operations Regional Support Regional Support NCE As Manager of SCADA Engineering, you will lead and develop a team of 7 Engineers 4 Specialists located in Denmark, Germany and Austria to drive improvements, while networking across our global organisation to ensure visibility and streamlining of tools. Being a hands-on leader, you will drive the performance and team spirit of the department, and regularly report to key stakeholders across the organisation. Responsibilities • Manager of department with 11 SCADA Engineers Specialists • Motivate and drive improvements • Convert strategy into action-oriented objectives for each employee and follow up to ensure targets are met • Establish and maintain good and productive relationship with internal and external stakeholders • Transfer new technology from VPS(R D) into NCE and ensure feedback and global knowledge sharing • Report writing and presentations detailing current and planned activity. Qualifications • Relevant technical education at Engineering level • Good understanding on SCADA systems • Experience from Wind power preferred, however, compatible industries may include, transportation, aerospace, telecommunications, IT, water and waste control. Competencies • Leadership experience within an engineering department • Excellent communication skills both written and spoken • Fluency in English. What we Offer We offer you a challenging and demanding job with excellent professional and personal development opportunities. You will have the chance to work in an inspiring, international environment and inside the world s leading company and manufacturer of sustainable energy solutions. Additional Information • This role is based in Videbæk, Denmark • Up to 30 days of travel will be required for this role For further information, please contact Jens Pedersen, Director, Regional Support NCE, on 45 9730 8305 About Vestas Vestas is the energy industry s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with more than 101 GW of wind turbines in 80 countries, we have installed more wind power than anyone else. Through our industry-leading smart data capabilities and unparalleled more than 86 GW of wind turbines under service, we use data to interpret, forecast, and exploit wind resources and deliver best-in-class wind power solutions. Together with our customers, Vestas more than 24,600 employees are bringing the world sustainable energy solutions to power a bright future. We invite you to learn more about Vestas by visiting our website at www.vestas.com and following us on our social media channels.

Are you ready to take the next step on your career leading a team of SCADA Engineers and Specialists for a global leader the innovation and manufacturing of sustainable energy solutions?
Are you a people manager who knows how to motivate and get the best from your team?

 

Due to continued growth, we now have an opportunity for a Manager of SCADA Engineering to join our team in Denmark.


Service Operations > Regional Support > Regional Support NCE

As Manager of SCADA Engineering, you will lead and develop a team of 7 Engineers & 4 Specialists located in Denmark, Germany and Austria to drive improvements, while networking across our global organisation to ensure visibility and streamlining of tools.

 

Being a hands-on leader, you will drive the performance and team spirit of the department, and regularly report to key stakeholders across the organisation.


Responsibilities

•    Manager of department with 11 SCADA Engineers/ Specialists 
•    Motivate and drive improvements
•    Convert strategy into action-oriented objectives for each employee and follow up to ensure targets are met
•    Establish and maintain good and productive relationship with internal and external stakeholders
•    Transfer new technology from VPS(R&D) into NCE and ensure feedback and global knowledge sharing
•    Report writing and presentations detailing current and planned activity.


Qualifications

•    Relevant technical education at Engineering level
•    Good understanding on SCADA systems
•    Experience from Wind power preferred, however, compatible industries may include, transportation, aerospace, telecommunications, IT, water and waste control.


Competencies

•    Leadership experience within an engineering department
•    Excellent communication skills both written and spoken
•    Fluency in English.


What we Offer

We offer you a challenging and demanding job with excellent professional and personal development opportunities. You will have the chance to work in an inspiring, international environment and inside the world's leading company and manufacturer of sustainable energy solutions.


Additional Information

•    This role is based in Videbæk, Denmark
•    Up to 30 days of travel will be required for this role

For further information, please contact Jens Pedersen, Director, Regional Support/NCE, on +45 9730 8305

About Vestas

Vestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with more than 101 GW of wind turbines in 80 countries, we have installed more wind power than anyone else. 

Through our industry-leading smart data capabilities and unparalleled more than 86 GW of wind turbines under service, we use data to interpret, forecast, and exploit wind resources and deliver best-in-class wind power solutions. 

Together with our customers, Vestas’ more than 24,600 employees are bringing the world sustainable energy solutions to power a bright future.

We invite you to learn more about Vestas by visiting our website at www.vestas.com and following us on our social media channels.

VESTAS WIND SYSTEMS A/SVidebæk2019-07-16T00:00:002019-07-30T00:00:00
330060703Load & Control EngineerRobot Get the chance to use your technical expertise in the offshore wind industry Do you hold a master s degree in engineering, and are you looking for an opportunity to apply your technical expertise? Are you ready to take on a role with a steep learning curve, where you will have great opportunities for developing your interdisciplinary technical knowledge? Tasks responsibilities: You will… …be responsible for project specific load analysis for WTG and support structure including technical support for customer, tower design, site specific design conformity statement as well as participate in the development and optimisation of our 9MW Platform and Next Generation Wind Turbine. Via stakeholder management, you will provide technical support on tender sales phases, installation and operation and perform turbine-related evaluation for construction and service improvement initiatives. You will also be responsible for: Technical review of external stakeholder documentation in generic and site-specific design Develop and maintain portfolio ideas for roadmaps and drive and execute selected initiatives Feasibility studies for WTG platform improvement and development ideas Monitor and guide relevant offshore guidelines and standards Initiate and support activities fostering knowledge-sharing on offshore turbine design Maintain and develop analysis tools for relevant markets Optimise work processes Skills experience: Our new colleague… …holds a master s degree in engineering and can either be newly educated or have some years of working experience form a similar role. You are eager to learn and would like to develop your interdisciplinary technical knowledge. In this role, it is important that you are innovative and able to foresee global technology trends. It would also be preferred if you have wind turbine knowledge. Since you will join an international engineering team, it is important that you have good English skills and can work cross-functionally. Join us if you… ...want to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional. In LAC Tower Design, we offer you: Great colleagues that support each other and work together Excellent opportunities for professional and personal development The opportunity to develop your interdisciplinary technical knowledge Apply now We re already looking forward to hearing from you. In case you have questions about the position, please contact Head of LAC Tower Design, Kenji Sato, on 45 2246 6481. Your primary work location will be Aarhus, Denmark. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially. Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with 3000 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan, Japan and the USA.

Get the chance to use your technical expertise in the offshore wind industry

Do you hold a master’s degree in engineering, and are you looking for an opportunity to apply your technical expertise? Are you ready to take on a role with a steep learning curve, where you will have great opportunities for developing your interdisciplinary technical knowledge?

Tasks & responsibilities: You will…

…be responsible for project specific load analysis for WTG and support structure including technical support for customer, tower design, site specific design conformity statement as well as participate in the development and optimisation of our 9MW Platform and Next Generation Wind Turbine. Via stakeholder management, you will provide technical support on tender sales phases, installation and operation and perform turbine-related evaluation for construction and service improvement initiatives.  

You will also be responsible for: 

  • Technical review of external stakeholder documentation in generic and site-specific design
  • Develop and maintain portfolio ideas for roadmaps and drive and execute selected initiatives 
  • Feasibility studies for WTG platform improvement and development ideas
  • Monitor and guide relevant offshore guidelines and standards
  • Initiate and support activities fostering knowledge-sharing on offshore turbine design
  • Maintain and develop analysis tools for relevant markets
  • Optimise work processes

Skills & experience: Our new colleague…

…holds a master’s degree in engineering and can either be newly educated or have some years of working experience form a similar role. You are eager to learn and would like to develop your interdisciplinary technical knowledge. In this role, it is important that you are innovative and able to foresee global technology trends. It would also be preferred if you have wind turbine knowledge. 

Since you will join an international engineering team, it is important that you have good English skills and can work cross-functionally. 

Join us if you…

...want to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional.

In LAC & Tower Design, we offer you:

  • Great colleagues that support each other and work together
  • Excellent opportunities for professional and personal development
  • The opportunity to develop your interdisciplinary technical knowledge

Apply now

We’re already looking forward to hearing from you. In case you have questions about the position, please contact Head of LAC & Tower Design, Kenji Sato, on +45 2246 6481. Your primary work location will be Aarhus, Denmark. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially. 

 

Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A/S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with +3000 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan, Japan and the USA.

MHI Vestas Offshore Wind A/SAarhus N2019-07-16T00:00:002019-09-10T00:00:00
330060650Tower Specialist - Aarhus or LondonRobot Apply your technical expertise to drive tower development Are you interested in managing offshore wind turbine tower design, driving development initiatives for tower cost-out and engaging with customers on site-specific tower design? Do you want to apply your skills in a company working to ensure a sustainable future energy supply? Tasks responsibilities: You will… …manage tower designs and customer engagement on towers for various offshore wind farm projects. You will be responsible for: Tower structure design Performing tower-related feasibility studies Technical support on field issues on tower Tower documentations and technical reviews on tower Driving tower cost-down through standardisation of tower and secure utilisation of existing tools throughout manufacturing, transportation and installation Developing tower-related cost-out ideas and identify most promising options in a business perspective Optimising and identifying potential improvements via state of the art load analysis tools Skills experience: Our new colleague… …has a relevant educational background at master s level in engineering with some years of experience from a similar position in a large company. As a person, you are innovative and have a systematic approach to your work and tasks. You thrive in a changing and fast-paced organisation where you are expected to adapt to changes and at the same time stay focused and keep the overview. We expect that you: Have interdisciplinary technical experience Have experience with offshore technical capabilities Can foresee global technology development and ensure development of interdisciplinary technical knowledge Have excellent English skills Join us if you… ...would like to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional. In Technical Engineering, we offer you: Great colleagues that support each other and work together Excellent opportunities for professional and personal development The right balance between creativity and quality in all solutions. We value initiative and responsibility The opportunity to apply your engineering skills in a fast-paced industry Apply now We re already looking forward to hearing from you. In case you have questions about the position, please contact Head of Technical Engineering, Kenji Sato, on 45 2246 6481. Your primary work location will be Aarhus, DK, or London, UK, depending on your residence. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially. Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with 3000 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan, Japan and the USA.

Apply your technical expertise to drive tower development  

Are you interested in managing offshore wind turbine tower design, driving development initiatives for tower cost-out and engaging with customers on site-specific tower design? Do you want to apply your skills in a company working to ensure a sustainable future energy supply?  

Tasks & responsibilities: You will…  

…manage tower designs and customer engagement on towers for various offshore wind farm projects. You will be responsible for:   

  • Tower structure design  
  • Performing tower-related feasibility studies  
  • Technical support on field issues on tower   
  • Tower documentations and technical reviews on tower  
  • Driving tower cost-down through standardisation of tower and secure utilisation of existing tools throughout manufacturing, transportation and installation  
  • Developing tower-related cost-out ideas and identify most promising options in a business perspective  
  • Optimising and identifying potential improvements via state of the art load analysis tools  

Skills & experience: Our new colleague…  

…has a relevant educational background at master’s level in engineering with some years of experience from a similar position in a large company. As a person, you are innovative and have a systematic approach to your work and tasks. You thrive in a changing and fast-paced organisation where you are expected to adapt to changes and at the same time stay focused and keep the overview.  

We expect that you:   

  • Have interdisciplinary technical experience  
  • Have experience with offshore technical capabilities  
  • Can foresee global technology development and ensure development of interdisciplinary technical knowledge  
  • Have excellent English skills  

Join us if you…  

...would like to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional.  

In Technical Engineering, we offer you:   

  • Great colleagues that support each other and work together  
  • Excellent opportunities for professional and personal development  
  • The right balance between creativity and quality in all solutions. We value initiative and responsibility   
  • The opportunity to apply your engineering skills in a fast-paced industry  

Apply now  

We’re already looking forward to hearing from you. In case you have questions about the position, please contact Head of Technical Engineering, Kenji Sato, on +45 2246 6481. Your primary work location will be Aarhus, DK, or London, UK, depending on your residence. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially.   

Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A/S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with +3000 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan, Japan and the USA.

MHI Vestas Offshore Wind A/SAarhus N2019-07-16T00:00:002019-09-10T00:00:00
330056539Load SpecialistRobot Do you want to play a key role in shaping the wind turbines of tomorrow and the processes related to this? Do you have extensive experience within load calculations of wind turbines? If yes, here is the perfect opportunity for you! Come join our mission in one of the key areas of Vestas, Load Control, as our new load specialist! Engineering Control Engineering Load Control Vestas Power Solutions is where new product ideas are developed, matured, improved and tested. We dedicate our time and effort to securing a more sustainable world and we operate on a global scale with more than 1,700 employees. As a part of Vestas Power Solutions, the Load Control Platform (LaC) department is one of the key areas in shaping the products of the future. In close corporation with our internal product owner, we balance the trade-offs between power production and loading, while introducing new rotors, ultimately leading to the most competitive new products introduced to the market. The main deliveries from the department are loading envelope to other component groups as well as commercial power performance documentation directly supporting Vestas position in the market. Currently, the department consists of 19 highly skilled and motivated engineers situated in Aarhus. Given the size of Vestas, we have the privilege that employees can deep dive into details and find the optimal solution. The team is dedicated to do their very best every day and we foster a culture where we positively and intentionally focus on helping each other and collaborate on reaching common solutions as we believe this maximizes the value of our products. LaC Platform works in a global setup, you will be cooperating with our newly established design hub in Porto and colleagues in our office in Chennai, India. You will have many very high skilled colleagues in a social yet result-oriented atmosphere. Beside the colleagues from aboard, Load and Control department has a very diverse environment with colleagues with 13 different nationalities. Responsibilities The job entails calculation of design loads, power performance and noise levels from early product feasibility state supporting the right product compromises, over maturing the loads setup, and finally ensuring verification between simulation model and field operation including successful handling of certification. The work involves high level of engineering i.e. balancing a solution towards various specific requirements. You will mainly work with aero-elastic simulation software and time series analysis. You will be responsible for documenting and presenting your work in a precise way to your internal and external stakeholders. With a lean mindset you always focus on improving the way we work by challenging status quo, and hereby impacting the time to market, strengthening Vestas competitiveness. Qualifications You have: A Ph.D. or M.Sc. within structural, civil, wind, mechanical, control or mechatronic engineering combined with 7 years experience within the wind industry Proven track record in running wind turbine product development from a load and control perspective Strong competences within dynamic simulation of mechanical systems You might have: Experience or knowledge of aero elastic tools as Flex5, Bladed or HAWC2 Programming experience preferably in Matlab Experience in leading projects following milestones and meeting deadlines, and maybe you are certified in project management Knowledge of control of mechanical systems Competencies It is expected that you: Actively drive improving processes and challenge status quo for how load calculations are conducted Are able to drive engineering solutions within the area from start to end Are strong in managing multiple stakeholders at various levels of the organisation Are pragmatic and quality conscious Are result-oriented with a strong focus on the task Have a creative approach to new challenges Can create success as part of a team as well as with independent tasks Collaborate and share knowledge with colleagues and stakeholders Danish language skills are not mandatory and we welcome international applicants. What we offer We offer an opportunity to be part of a strong team in an exciting business with very strong products, supporting Vestas overall mission. The working environment in Load Control is informal but with clear direction. You will be part of an effective matrix organisation split between line management, technical leadership and project execution. Come join us and you will be part of an international organisation with opportunities to grow and develop in the job both professionally and personally. Additional information Primary work location Aarhus, Denmark For additional information about the position, please contact Sr. Manager, Pradeepkumar Zinjade at 914466889210. Please send your application as soon as possible as we will close the position when we find the right candidate. About Vestas Vestas is the energy industry s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with 97 GW of wind turbines in 79 countries, we have installed more wind power than anyone else. Through our industry-leading smart data capabilities and unparalleled 83 GW of wind turbines under service, we use data to interpret, forecast, and exploit wind resources and deliver best-in-class wind power solutions. Together with our customers, Vestas more than 24,400 employees are bringing the world sustainable energy solutions to power a bright future. We invite you to learn more about Vestas by visiting our website at www.vestas.com and following us on our social media channels.

Do you want to play a key role in shaping the wind turbines of tomorrow and the processes related to this? Do you have extensive experience within load calculations of wind turbines? 

If yes, here is the perfect opportunity for you!  Come join our mission in one of the key areas of Vestas, Load & Control, as our new load specialist! 

 

Engineering > Control Engineering > Load & Control
Vestas Power Solutions is where new product ideas are developed, matured, improved and tested. We dedicate our time and effort to securing a more sustainable world and we operate on a global scale with more than 1,700 employees.

As a part of Vestas Power Solutions, the Load & Control Platform (LaC) department is one of the key areas in shaping the products of the future. In close corporation with our internal product owner, we balance the trade-offs between power production and loading, while introducing new rotors, ultimately leading to the most competitive new products introduced to the market. The main deliveries from the department are loading envelope to other component groups as well as commercial power performance documentation directly supporting Vestas’ position in the market.

Currently, the department consists of 19 highly skilled and motivated engineers situated in Aarhus. Given the size of Vestas, we have the privilege that employees can deep dive into details and find the optimal solution. The team is dedicated to do their very best every day and we foster a culture where we positively and intentionally focus on helping each other and collaborate on reaching common solutions – as we believe this maximizes the value of our products.

LaC Platform works in a global setup, you will be cooperating with our newly established design hub in Porto and colleagues in our office in Chennai, India. You will have many very high skilled colleagues in a social yet result-oriented atmosphere. Beside the colleagues from aboard, Load and Control department has a very diverse environment with colleagues with 13 different nationalities. 

 

Responsibilities
The job entails calculation of design loads, power performance and noise levels from early product feasibility state supporting the right product compromises, over maturing the loads setup, and finally ensuring verification between simulation model and field operation including successful handling of certification.

The work involves high level of engineering i.e. balancing a solution towards various specific requirements.  You will mainly work with aero-elastic simulation software and time series analysis. You will be responsible for documenting and presenting your work in a precise way to your internal and external stakeholders. 

With a lean mindset you always focus on improving the way we work by challenging status quo, and hereby impacting the time to market, strengthening Vestas’ competitiveness.

 

Qualifications
You have:

  • A Ph.D. or M.Sc. within structural, civil, wind, mechanical, control or mechatronic engineering combined with 7+ years experience within the wind industry
  • Proven track record in running wind turbine product development from a load and control perspective
  • Strong competences within dynamic simulation of mechanical systems

You might have: 

  • Experience or knowledge of aero elastic tools as Flex5, Bladed or HAWC2
  • Programming experience preferably in Matlab
  • Experience in leading projects following milestones and meeting deadlines, and maybe you are certified in project management 
  • Knowledge of control of mechanical systems

 

Competencies
It is expected that you:

  • Actively drive improving processes and challenge status quo for how load calculations are conducted 
  • Are able to drive engineering solutions within the area from start to end 
  • Are strong in managing multiple stakeholders at various levels of the organisation
  • Are pragmatic and quality conscious
  • Are result-oriented with a strong focus on the task 
  • Have a creative approach to new challenges 
  • Can create success as part of a team as well as with independent tasks 
  • Collaborate and share knowledge with colleagues and stakeholders 
  • Danish language skills are not mandatory and we welcome international applicants.

 

What we offer
We offer an opportunity to be part of a strong team in an exciting business with very strong products, supporting Vestas’ overall mission. The working environment in Load & Control is informal but with clear direction. 
You will be part of an effective matrix organisation split between line management, technical leadership and project execution. 
Come join us and you will be part of an international organisation with opportunities to grow and develop in the job – both professionally and personally.

 

Additional information
Primary work location Aarhus, Denmark 
For additional information about the position, please contact  Sr. Manager, Pradeepkumar Zinjade at +914466889210.
Please send your application as soon as possible as we will close the position when we find the right candidate. 

About Vestas

Vestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with 97 GW of wind turbines in 79 countries, we have installed more wind power than anyone else. 

Through our industry-leading smart data capabilities and unparalleled 83 GW of wind turbines under service, we use data to interpret, forecast, and exploit wind resources and deliver best-in-class wind power solutions. Together with our customers, Vestas’ more than 24,400 employees are bringing the world sustainable energy solutions to power a bright future. 

We invite you to learn more about Vestas by visiting our website at www.vestas.com and following us on our social media channels.

Vestas Wind System A/SAarhus N2019-07-08T00:00:002019-07-22T00:00:00
da-DK

Andre job der matcher din søgning

Projektingeniør til PLC/SCADA-applikationer

Effektiv Rekruttering

Silkeborg
Virksomheden Vores kunde er en sund og velfungerende virksomhed med afdelinger flere steder i hele Danmark, hvor alle 100 medarbejdere arbejder engageret og kvalitetsbevidst med deres opgaver. Du får mulighed for faglige og personlige udfordringer i...
Indrykket:18. juni 2019
Udløbsdato:14. august 2019

Manager SCADA Engineering

VESTAS WIND SYSTEMS A/S

Videbæk
Are you ready to take the next step on your career leading a team of SCADA Engineers and Specialists for a global leader the innovation and manufacturing of sustainable energy solutions? Are you a people manager who knows how to motivate and get the...
Indrykket:16. juli 2019
Udløbsdato:30. juli 2019

Load & Control Engineer

MHI Vestas Offshore Wind A/S

Aarhus N
Get the chance to use your technical expertise in the offshore wind industry Do you hold a master s degree in engineering, and are you looking for an opportunity to apply your technical expertise? Are you ready to take on a role with a steep learnin...
Indrykket:16. juli 2019
Udløbsdato:10. september 2019

Tower Specialist - Aarhus or London

MHI Vestas Offshore Wind A/S

Aarhus N
Apply your technical expertise to drive tower development Are you interested in managing offshore wind turbine tower design, driving development initiatives for tower cost-out and engaging with customers on site-specific tower design? Do you want to...
Indrykket:16. juli 2019
Udløbsdato:10. september 2019

Load Specialist

Vestas Wind System A/S

Aarhus N
Do you want to play a key role in shaping the wind turbines of tomorrow and the processes related to this? Do you have extensive experience within load calculations of wind turbines? If yes, here is the perfect opportunity for you! Come join our mis...
Indrykket:8. juli 2019
Udløbsdato:22. juli 2019