Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

Foundry Manager - An exciting career opportunity in an international company

You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron.

On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager.

Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency.

As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas; material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners.

With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. 

We expect, that you:

  • have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience
  • as a minimum have good command of English in speaking and writing
  • will move your permanent residence to Aars, Nordjylland area
  • can work independently and show initiative

We offer:

  • an interesting and challenging job with high responsibility
  • co-operation with competent colleagues in an informal environment
  • good opportunities to influence your daily work and with freedom under responsibility
  • a thorough introduction and training

Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70% of sales is export. 

Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron.

The company believes in good customer service and appreciate commitment, cooperation and good skills.

Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https://matdania.com/ 

Practical information

For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone +45 4040 6460 or e-mail jkr@dania-as.dk

The position is to occupation as soon as possible.

Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk

We look forward to hearing from you.


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330020301Phoenix-eddd843312019-06-03T00:00:00Foundry Manager - An exciting career opportunity in an international company

You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron.

On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager.

Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency.

As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas; material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners.

With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. 

We expect, that you:

  • have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience
  • as a minimum have good command of English in speaking and writing
  • will move your permanent residence to Aars, Nordjylland area
  • can work independently and show initiative

We offer:

  • an interesting and challenging job with high responsibility
  • co-operation with competent colleagues in an informal environment
  • good opportunities to influence your daily work and with freedom under responsibility
  • a thorough introduction and training

Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70% of sales is export. 

Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron.

The company believes in good customer service and appreciate commitment, cooperation and good skills.

Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https://matdania.com/ 

Practical information

For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone +45 4040 6460 or e-mail jkr@dania-as.dk

The position is to occupation as soon as possible.

Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk

We look forward to hearing from you.

2019-07-04T00:50:58.760 You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron. On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager. Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency. As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners. With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. We expect, that you: have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience as a minimum have good command of English in speaking and writing will move your permanent residence to Aars, Nordjylland area can work independently and show initiative We offer: an interesting and challenging job with high responsibility co-operation with competent colleagues in an informal environment good opportunities to influence your daily work and with freedom under responsibility a thorough introduction and training Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70 of sales is export. Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron. The company believes in good customer service and appreciate commitment, cooperation and good skills. Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https: matdania.com Practical information For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone 45 4040 6460 or e-mail jkr@dania-as.dk The position is to occupation as soon as possible. Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk We look forward to hearing from you.11jobneteddd8433100000000000IDK_OFIR_02DKDanmark228DKK2019-07-03T00:00:0000010EuropaDanmarkJyllandNordjyllandVesthimmerlandEuropaDanmarkJyllandNordjyllandRebild3523373MAT DANIA ApS11Markedsvej 219600AarsDKDanmark0rim@workindenmark.dkDKDanmarkDKDanmark8Fuldtid46Permanent757229JobNet4985474498547410008-05-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=eddd8433https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=eddd8433https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=eddd8433&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=eddd8433&page=EmailApplyForm&component=SendApplicationButton1Dansk3Læse/ tale214909Produktionsingeniør20Ingeniør og naturvidenskab361741082Rikke Mogensenrim@workindenmark.dkDKDanmarkDKDanmark330056877Kvalitetsbevidst PTA ingeniørRobot Induflex er en ordreproducerende virksomhed med speciale i løsninger i plast, der står midt i en spændende udvikling. Vi søger derfor en uddannet ingeniør til PTA-arbejde. Har du lyst til at være en del af produktionen i vores lilla verden af plast, er det måske dig, vi søger. Hvad kommer du til at lave? Du kommer til at indgå i produktionen med 21 dygtige kolleger, hvor du kommer til at have en spændende hverdag i dynamikken mellem produktion og salg. Du kommer til at referere til produktionschefen, men vil have en dynamisk hverdag med rigtig mange funktioner og opgaver du skal forvente at skulle holde en masse bolde i luften, men også kunne afrunde effektivt. Du vil blive ansvarlig for vores produktionsruter og styklister, der beskriver vores arbejdsflow i virksomheden, og vil på baggrund af det være med til at give hurtig tilbudsgivning til vores kunder. Du vil også skulle være med til at drive produktionsoptimering og fremme forebyggende vedligehold. Hvad forventer vi af dig Du er uddannet produktionsingeniør eller anden relevant ingeniøruddannelse. Du kan være nyuddannet, men erfaring er et plus. Du får en grundig introduktion til plast, så erfaring hermed er ikke et krav. Bare du kan holde fokus på at finde løsninger og fungere som bindeled mellem produktion og salg. Hvis du har kendskab til LEAN eller anden produktionsoptimering, er det en fordel, men ikke et krav. Vi ønsker en kollega, der også kan sætte flueben ved følgende: Du er god til at holde overblik. Du er selvkørende og kommer i perioder til at have travlt. Derfor forestiller vi os, at du er struktureret og har fokus på at overholde deadlines. Du har en positiv indstilling. Da du får en bred kontaktflade på tværs af huset, er det vigtigt, at du er imødekommende, serviceminded og kan begå dig på alle niveauer. Du er kvalitetsbevidst. Vores kunder har høje forventninger. Vi forventer derfor, at du tager ansvar for dine opgaver fra start til slut, er ansvarsbevidst og har øje for detaljerne. Derudover forestiller vi os, at du har et godt kendskab til ERP. Det får du En dynamisk hverdag hvor der er en god blanding af nye og rutine opgaver. En stilling som du selv kan være med til at forme. Et spændende og udfordrende job, med en hverdag der er præget af variation og højt tempo. Du får nogle skønne kolleger på Den Lilla Fabrik , hvor tonen er uformel. Hvordan ansøger du? Du sender din ansøgning til job@induflex.dk senest søndag den 18. august.Vær opmærksom på, at vi kun modtager ansøgninger på mail. Vi indkalder til samtale løbende og ansætter, når vi har fundet den rette.Der er opstart efter aftale. Har du spørgsmål, er du velkommen til at ringe til Produktionschef Tony Christensen 2845 4988 Vil du vide mere om os, så tjek www.induflex.dk

Induflex er en ordreproducerende virksomhed med speciale i løsninger i plast, der står midt i en spændende udvikling. Vi søger derfor en uddannet ingeniør til PTA-arbejde.

Har du lyst til at være en del af produktionen i vores lilla verden af plast, er det måske dig, vi søger.

 

Hvad kommer du til at lave?

Du kommer til at indgå i produktionen med 21 dygtige kolleger, hvor du kommer til at have en spændende hverdag i dynamikken mellem produktion og salg.

Du kommer til at referere til produktionschefen, men vil have en dynamisk hverdag med rigtig mange funktioner og opgaver – du skal forvente at skulle holde en masse bolde i luften, men også kunne afrunde effektivt.

Du vil blive ansvarlig for vores produktionsruter og styklister, der beskriver vores arbejdsflow i virksomheden, og vil på baggrund af det være med til at give hurtig tilbudsgivning til vores kunder.

Du vil også skulle være med til at drive produktionsoptimering og fremme forebyggende vedligehold.

 

Hvad forventer vi af dig

Du er uddannet produktionsingeniør eller anden relevant ingeniøruddannelse. Du kan være nyuddannet, men erfaring er et plus.

Du får en grundig introduktion til plast, så erfaring hermed er ikke et krav. Bare du kan holde fokus på at finde løsninger og fungere som bindeled mellem produktion og salg.

Hvis du har kendskab til LEAN eller anden produktionsoptimering, er det en fordel, men ikke et krav. 

Vi ønsker en kollega, der også kan sætte flueben ved følgende:

Du er god til at holde overblik. Du er selvkørende og kommer i perioder til at have travlt. Derfor forestiller vi os, at du er struktureret og har fokus på at overholde deadlines.

Du har en positiv indstilling. Da du får en bred kontaktflade på tværs af huset, er det vigtigt, at du er imødekommende, serviceminded og kan begå dig på alle niveauer.

Du er kvalitetsbevidst. Vores kunder har høje forventninger. Vi forventer derfor, at du tager ansvar for dine opgaver fra start til slut, er ansvarsbevidst og har øje for detaljerne.

Derudover forestiller vi os, at du har et godt kendskab til ERP.

 

Det får du

En dynamisk hverdag hvor der er en god blanding af nye og rutine opgaver.

En stilling som du selv kan være med til at forme.

Et spændende og udfordrende job, med en hverdag der er præget af variation og højt tempo.

Du får nogle skønne kolleger på ”Den Lilla Fabrik”, hvor tonen er uformel.

 

Hvordan ansøger du?

Du sender din ansøgning til job@induflex.dk senest søndag den 18. august.
Vær opmærksom på, at vi kun modtager ansøgninger på mail.


Vi indkalder til samtale løbende og ansætter, når vi har fundet den rette.
Der er opstart efter aftale.

Har du spørgsmål, er du velkommen til at ringe til Produktionschef Tony Christensen 2845 4988

 

Vil du vide mere om os, så tjek www.induflex.dk

INDUFLEX A/SStøvring2019-07-09T00:00:002019-08-18T00:00:00
330055906Foundry Manager - An exciting career opportunity in an international companyRobot You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron. On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager. Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency. As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners. With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. We expect, that you: have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience as a minimum have good command of English in speaking and writing will move your permanent residence to Aars, Nordjylland area can work independently and show initiative We offer: an interesting and challenging job with high responsibility co-operation with competent colleagues in an informal environment good opportunities to influence your daily work and with freedom under responsibility a thorough introduction and training Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70 of sales is export. Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron. The company believes in good customer service and appreciate commitment, cooperation and good skills. Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https: matdania.com Practical information For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone 45 4040 6460 or e-mail jkr@dania-as.dk The position is to occupation as soon as possible. Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk We look forward to hearing from you.

You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron.

On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager.

Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency.

As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas; material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners.

With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. 

We expect, that you:

  • have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience
  • as a minimum have good command of English in speaking and writing
  • will move your permanent residence to Aars, Nordjylland area
  • can work independently and show initiative

We offer:

  • an interesting and challenging job with high responsibility
  • co-operation with competent colleagues in an informal environment
  • good opportunities to influence your daily work and with freedom under responsibility
  • a thorough introduction and training

Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70% of sales is export. 

Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron.

The company believes in good customer service and appreciate commitment, cooperation and good skills.

Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https://matdania.com/ 

Practical information

For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone +45 4040 6460 or e-mail jkr@dania-as.dk

The position is to occupation as soon as possible.

Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk

We look forward to hearing from you.

MAT DANIA ApSAars2019-07-06T00:00:002019-08-29T00:00:00
330049094Manager in Advanced Manufacturing EngineeringRobot Do you have some years of leadership experience, and are you ready to take the next step in your career? Would you like to do this within a high-technology environment with a strong sustainability agenda and a focus on innovative thinking? Then take part in driving and managing our manufacturing technology development and get the chance to put your fingerprint on the future of our Advanced Manufacturing Engineering (AME) organisation within a multinational, industrial operation. Help us develop and optimise production technologies Our AME organisation is comprised of multiple departments developing vital aspects of our manufacturing technology within areas such as hydraulics, motors and mechatronics. In close collaboration with our Centres of Excellence, you will manage a team of approximately 30 technicians (primarily hourly paid employees) in our workshop. Driving the development, introduction and optimisation of strategic production technologies, you will: Develop strategies, plans and activities for different projects and ensure ontime completion and plan-compliance Lead resource coordination and prioritisation Optimise production processes based on defined platforms, ensuring flexibility, scalability and costefficiency Take responsibility for department budget, budgeting and followup Ensure continuous performance and process improvement through development Gain a wide network and expert knowledge As a manager, you will also become part of the AME extended leadership team. This gives you the opportunity to lead organizational change and help set the strategic direction for AME, whilst also giving you access to a wide cross-border and cross-functional network of contacts. This position gives unique access to expert knowledge within leadership and management and to sharing your ideas in a forum where it can make a real difference, says Anders Nygaard, Director in AME. Technical profile with management experience We imagine that you: Hold a relevant engineering degree within mechanics, production or similar Have a few years of experience as a manager, preferably with team responsibility within a larger multicultural organization Speak and write English effortlessly Have project management experience however, this is a plus, not a prerequisite To succeed in this position, it is important that you are communicative and able to manage a wide and cross-functional network. Ideally, you are also highly result-oriented and able to uncover challenges and possibilities in order to ensure continuous optimisation and development. Moreover, we are looking for someone who has an open mind towards their future within Grundfos as the possibilities are many, concludes Anders Nygaard. Additional information If you have questions or want to know more about the position, please contact Director in AME, Anders Nygaard on 45 87 50 58 03 or mobile 45 40 10 30 11. If this job sounds appealing to you, please send your resume and cover letter no later than 4 August 2019 by clicking on Apply . We expect interviews to be held in week 33. We look forward to hearing from you. If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com company 5195 or our YouTube channel: www.youtube.com watch?v zwY54t455CU.

Do you have some years of leadership experience, and are you ready to take the next step in your career? Would you like to do this within a high-technology environment with a strong sustainability agenda and a focus on innovative thinking?

Then take part in driving and managing our manufacturing technology development and get the chance to put your fingerprint on the future of our Advanced Manufacturing Engineering (AME) organisation within a multinational, industrial operation.

 

Help us develop and optimise production technologies

Our AME organisation is comprised of multiple departments developing vital aspects of our manufacturing technology within areas such as hydraulics, motors and mechatronics. In close collaboration with our Centres of Excellence, you will manage a team of approximately 30 technicians (primarily hourly paid employees) in our workshop.  

Driving the development, introduction and optimisation of strategic production technologies, you will:

  • Develop strategies, plans and activities for different projects and ensure ontime completion and plan-compliance
  • Lead resource coordination and prioritisation
  • Optimise production processes based on defined platforms, ensuring flexibility, scalability and costefficiency
  • Take responsibility for department budget, budgeting and followup
  • Ensure continuous performance and process improvement through development

 

Gain a wide network and expert knowledge

As a manager, you will also become part of the AME extended leadership team. This gives you the opportunity to lead organizational change and help set the strategic direction for AME, whilst also giving you access to a wide cross-border and cross-functional network of contacts.

“This position gives unique access to expert knowledge within leadership and management and to sharing your ideas in a forum where it can make a real difference,” says Anders Nygaard, Director in AME.

 

Technical profile with management experience
We imagine that you:

  • Hold a relevant engineering degree within mechanics, production or similar
  • Have a few years of experience as a manager, preferably with team responsibility within a larger multicultural organization
  • Speak and write English effortlessly
  • Have project management experience – however, this is a plus, not a prerequisite

“To succeed in this position, it is important that you are communicative and able to manage a wide and cross-functional network. Ideally, you are also highly result-oriented and able to uncover challenges and possibilities in order to ensure continuous optimisation and development. Moreover, we are looking for someone who has an open mind towards their future within Grundfos as the possibilities are many,” concludes Anders Nygaard.

 

Additional information

If you have questions or want to know more about the position, please contact Director in AME, Anders Nygaard on +45 87 50 58 03 or mobile +45 40 10 30 11.

If this job sounds appealing to you, please send your resume and cover letter no later than 4 August 2019 by clicking on “Apply”. We expect interviews to be held in week 33.

 

We look forward to hearing from you.

If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com/company/5195 or our YouTube channel: www.youtube.com/watch?v=zwY54t455CU.

GRUNDFOS HOLDING A/SBjerringbro2019-06-25T00:00:002019-08-04T00:00:00
330046931Senior Process Data Engineer for quality improvementsRobot Would you like to be the one enabling Grundfos to produce pump solutions of even greater technical accuracy? As part of our Advanced Manufacturing Engineering (AME) organization, you will drive optimization activities to improve hydraulic pump manufacturing processes and product quality and precision. By looking through our current and future set-ups, you establish more dependable and efficient processes, enabling us to introduce sustainable and efficient production in an even more responsible way while meeting target quality levels, says Morten Simonsen, Manager. Ensure quality by bridging new-tech implementation and operations At our AME site in Bjerringbro, Denmark, you will join 20 dedicated colleagues with different technical backgrounds. Here, you will provide our Advanced Manufacturing Engineering Hydraulics division with a quality perspective on our processes and projects. Navigating in the gap between implementing new technologies and the daily manufacturing operations, you deep-dive into our existing data and previous experiences as well as collect new data to create insights for future performance. Thus, you ensure that we unfold the full potential of our current knowledge and design manufacturing processes to raise our product quality and at the same time save time and resources. Among other exciting tasks, you will: Support run-in of new production processes and production ramp-up activities to reach target quality levels and pursue quality issues Drive Six Sigma activities and translate data into operational suggestions and solutions for process improvements Support the AME Hydraulics unit with quality issues and systems and lead task forces when needed Facilitate and implement robust process designs Facilitate P-FMEA and support the specialists in P-FMEA activities As our sole quality specialist, you will be navigating in a field with many stakeholders and opinions. But you are ready to explore new grounds, challenge status quo and take a stand on quality to implement best practice across the organization, Morten explains. Use your innovative perspective to meet future challenges You have the analytical mindset and knowledge of manufacturing needed to take action in a project-based team. This also enables you to facilitate quality awareness in an end-to-end production perspective from ideation phases to daily production. Moreover, we imagine that you: Bring solid experience from a production environment and or with process quality regarding manufacturing technologies Hold a relevant technical bachelor s degree in engineering Have a thorough understanding of manufacturing planning, processes and activities and bring knowledge of development tools and systems Speak and write English effortlessly Additional information If you have questions or want to know more about the position, please contact Manager Morten Simonsen on 45 6087 0900. If this job sounds appealing to you, please send your resume and cover letter today and no later than 28th of July 2019 by clicking on Apply . We expect interviews to be held during week 32. We look forward to hearing from you. If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com company 5195 or our YouTube channel: https: www.youtube.com watch?v zwY54t455CU.

Would you like to be the one enabling Grundfos to produce pump solutions of even greater technical accuracy?

As part of our Advanced Manufacturing Engineering (AME) organization, you will drive optimization activities to improve hydraulic pump manufacturing processes and product quality and precision.

By looking through our current and future set-ups, you establish more dependable and efficient processes, enabling us to introduce sustainable and efficient production in an even more responsible way while meeting target quality levels,” says Morten Simonsen, Manager.

 

Ensure quality by bridging new-tech implementation and operations

At our AME site in Bjerringbro, Denmark, you will join 20 dedicated colleagues with different technical backgrounds. Here, you will provide our Advanced Manufacturing Engineering Hydraulics division with a quality perspective on our processes and projects.

Navigating in the gap between implementing new technologies and the daily manufacturing operations, you deep-dive into our existing data and previous experiences as well as collect new data to create insights for future performance. Thus, you ensure that we unfold the full potential of our current knowledge and design manufacturing processes to raise our product quality and at the same time save time and resources.

Among other exciting tasks, you will:

  • Support run-in of new production processes and production ramp-up activities to reach target quality levels and pursue quality issues
  • Drive Six Sigma activities and translate data into operational suggestions and solutions for process improvements 
  • Support the AME Hydraulics unit with quality issues and systems and lead task forces when needed
  • Facilitate and implement robust process designs
  • Facilitate P-FMEA and support the specialists in P-FMEA activities

“As our sole quality specialist, you will be navigating in a field with many stakeholders – and opinions. But you are ready to explore new grounds, challenge status quo and take a stand on quality to implement best practice across the organization,” Morten explains.

 

Use your innovative perspective to meet future challenges

You have the analytical mindset and knowledge of manufacturing needed to take action in a project-based team. This also enables you to facilitate quality awareness in an end-to-end production perspective from ideation phases to daily production. Moreover, we imagine that you:

  • Bring solid experience from a production environment and/or with process quality regarding manufacturing technologies
  • Hold a relevant technical bachelor’s degree in engineering
  • Have a thorough understanding of manufacturing planning, processes and activities and bring knowledge of development tools and systems
  • Speak and write English effortlessly

 

Additional information

If you have questions or want to know more about the position, please contact Manager Morten Simonsen on +45 6087 0900.

If this job sounds appealing to you, please send your resume and cover letter today and no later than 28th of July 2019 by clicking on “Apply”. We expect interviews to be held during week 32.

 

We look forward to hearing from you.

If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com/company/5195 or our YouTube channel: https://www.youtube.com/watch?v=zwY54t455CU.

GRUNDFOS HOLDING A/SBjerringbro2019-06-23T00:00:002019-07-28T00:00:00
da-DK

Andre job der matcher din søgning

Kvalitetsbevidst PTA ingeniør

INDUFLEX A/S

Støvring
Induflex er en ordreproducerende virksomhed med speciale i løsninger i plast, der står midt i en spændende udvikling. Vi søger derfor en uddannet ingeniør til PTA-arbejde. Har du lyst til at være en del af produktionen i vores lilla verden af plast,...
Indrykket:9. juli 2019
Udløbsdato:18. august 2019

Foundry Manager - An exciting career opportunity in an international company

MAT DANIA ApS

Aars
You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron. On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager. Dania is in a very positive development and exp...
Indrykket:6. juli 2019
Udløbsdato:29. august 2019

Manager in Advanced Manufacturing Engineering

GRUNDFOS HOLDING A/S

Bjerringbro
Do you have some years of leadership experience, and are you ready to take the next step in your career? Would you like to do this within a high-technology environment with a strong sustainability agenda and a focus on innovative thinking? Then take...
Indrykket:25. juni 2019
Udløbsdato:4. august 2019

Senior Process Data Engineer for quality improvements

GRUNDFOS HOLDING A/S

Bjerringbro
Would you like to be the one enabling Grundfos to produce pump solutions of even greater technical accuracy? As part of our Advanced Manufacturing Engineering (AME) organization, you will drive optimization activities to improve hydraulic pump manuf...
Indrykket:23. juni 2019
Udløbsdato:28. juli 2019