Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

Foundry Manager - An exciting career opportunity in an international company

You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron.

On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager.

Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency.

As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas; material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners.

With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. 

We expect, that you:

  • have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience
  • as a minimum have good command of English in speaking and writing
  • will move your permanent residence to Aars, Nordjylland area
  • can work independently and show initiative

We offer:

  • an interesting and challenging job with high responsibility
  • co-operation with competent colleagues in an informal environment
  • good opportunities to influence your daily work and with freedom under responsibility
  • a thorough introduction and training

Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70% of sales is export. 

Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron.

The company believes in good customer service and appreciate commitment, cooperation and good skills.

Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https://matdania.com/ 

Practical information

For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone +45 4040 6460 or e-mail jkr@dania-as.dk

The position is to occupation as soon as possible.

Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk

We look forward to hearing from you.


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330020301Phoenix-eddd843312019-06-03T00:00:00Foundry Manager - An exciting career opportunity in an international company

You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron.

On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager.

Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency.

As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas; material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners.

With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. 

We expect, that you:

  • have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience
  • as a minimum have good command of English in speaking and writing
  • will move your permanent residence to Aars, Nordjylland area
  • can work independently and show initiative

We offer:

  • an interesting and challenging job with high responsibility
  • co-operation with competent colleagues in an informal environment
  • good opportunities to influence your daily work and with freedom under responsibility
  • a thorough introduction and training

Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70% of sales is export. 

Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron.

The company believes in good customer service and appreciate commitment, cooperation and good skills.

Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https://matdania.com/ 

Practical information

For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone +45 4040 6460 or e-mail jkr@dania-as.dk

The position is to occupation as soon as possible.

Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk

We look forward to hearing from you.

2019-07-04T00:50:58.760 You are offered a key position in a Danish foundry that specializes in high quality castings in ductile as well as grey iron. On behalf of MAT Dania ApS, Workindenmark is looking for a Foundry Manager. Dania is in a very positive development and expands internationally via international partner foundries in MAT Group as well as enhances their product offerings based upon more complex castings, new material qualities as well as increased efficiency. As a Foundry Manager you will be overall responsible for the Core department, Furnaces, two DISA lines and Wagner SINTO Horizontal line. You will have a central position and work within the areas material qualities, melting process, casting process in cooperation with skilled colleagues, suppliers and cooperation partners. With your line managers you have to focus on systematic continuous improvements in efficiency, scrap development from the lines. Further you ensure improvement of the products, processes, systems, procedures and instructions. We expect, that you: have an education and work experience as foundry engineer or metallurgist or has acquired similar proficiency via job experience as a minimum have good command of English in speaking and writing will move your permanent residence to Aars, Nordjylland area can work independently and show initiative We offer: an interesting and challenging job with high responsibility co-operation with competent colleagues in an informal environment good opportunities to influence your daily work and with freedom under responsibility a thorough introduction and training Dania is a modern foundry with own machine shop in Poland and they supply leading customers within the segments Hydraulics, Commercial Vehicles and Machine Components. Approximately 70 of sales is export. Dania is part of the global MAT group with foundries in America, Europe and China. The company has a very efficient production set up based upon two vertical DISA lines as well as a horizontal HWS line. Dania offer a wide range of material qualities in grey as well as ductile iron. The company believes in good customer service and appreciate commitment, cooperation and good skills. Around 430 employees in Poland and Denmark contribute to the results and the important continuous improvement to facilitate growth and our market position. For further information visit https: matdania.com Practical information For more information about the position you are welcome to contact CEO Jorn Krogager on mobile phone 45 4040 6460 or e-mail jkr@dania-as.dk The position is to occupation as soon as possible. Please send your application and CV in either English or Danish to Recruitment Consultant Rikke Mogensen, rim@workindenmark.dk We look forward to hearing from you.11jobneteddd8433100000000000IDK_OFIR_02DKDanmark228DKK2019-07-03T00:00:0000010EuropaDanmarkJyllandNordjyllandVesthimmerlandEuropaDanmarkJyllandNordjyllandRebild3523373MAT DANIA ApS11Markedsvej 219600AarsDKDanmark0rim@workindenmark.dkDKDanmarkDKDanmark8Fuldtid46Permanent757229JobNet4985474498547410008-05-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=eddd8433https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=eddd8433https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=eddd8433&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=eddd8433&page=EmailApplyForm&component=SendApplicationButtonFoundry Manager - An exciting career opportunity in an international company1Dansk3Læse/ tale214909Produktionsingeniør20Ingeniør og naturvidenskab361741082Rikke Mogensenrim@workindenmark.dkDKDanmarkDKDanmark330158400Sr. Product Line Manager within CirculatorsRobot Do you want to enter a key product management role, where you will have the opportunity to affect the Grundfos customer value footprint to the highest extent? Then take on a central position in our Building Services division where you will ensure that the small frequency controlled ALPHA products has the right product portfolio in place. The key cornerstone of this role is to assign the right portfolio direction based on in-house knowledge combined with new opportunities by working structured with customer pains and radical innovation to create value in domestic HVAC applications. Ensure the right long-term product portfolio As Product Line Manager in the Circulator program, you will be collaborating closely internally with our sales and development organization and externally with customers, industry experts and regional business development setups. Jacob, the hiring manager has the following statement about the role: Our small UPE (Electronically controlled circulator pumps for Domestic Building Services) product line is a high attention area within Grundfos where excellent portfolio management, execution mindset and analytic due diligence on future roadmaps will be noticed and rewarded within all functions of Grundfos. The task is not only focussed around the product but also the different systems and offerings which can merge into a creation of higher customer value so if you have the will to think outside the box on a box-product sold through wholesales, the chance is definitely present within this opportunity As such, you will be the central hub in the organization for gathering information from all relevant sources and translate it into a strong product roadmap. In short, your responsibility will be to: -Drive and lead the 5-year Product Roadmap linked to the overall strategy -Gain and consolidate a deep understanding of the customer experience -Identify and specify new projects based on customer and market input and validate in business cases -Collect, consolidate and analyse competitor and market data and propose actions -Support development projects from a commercial angle -Scope and Prioritize Product Lifecycle management activities -Communicate the product roadmap, overall product strategy and application knowledge to relevant stakeholders internally and externally -Strong technical competences with commercial flair You are among the core professionals in our building Services division, with a solid commercial mindset and the ability to understand technical matters quickly. On a personal level, you thrive in diverse work processes and can build wide and effective networks both inside and outside the organisation. You are an excellent communicator and work well in a pressurised environment cooping constructively with setbacks and challenges. You relate well to people at all levels and by being quick to engage with, creating trust and by identifying exactly where value can be created for customers and Grundfos in a complex array of business challenges. You are among business development- and technical manager colleagues, highly specialised as well as highly competent in all its general aspects. On a personal level, you thrive in diverse work processes and can seamlessly join new teams when the need arises. Having excellent leadership and managing skills, you are quick to engage with, create trust, and identify exactly where value can be created in a complex array of business challenges. -You have several years of relevant work experience and solid knowledge in working product management from a commercial angle -You preferably have industry experience within HVAC for the domestic buildings segment and are familiar with working in a large manufacturing environment -You either possess a master s degree in business development engineering and have technical flair or an Engineering Degree and at the same time have a commercial mindset (preferably backed up by commercial courses) -Proficiency in English, verbally and written, is a must Additional information If you have questions or want to know more about the position, please contact Program Director for Circulators, Jacob Naldal, on 45 29471127. If this job sounds appealing to you, please send your resume and cover letter today and no later than February 14, 2020 by clicking on Apply . We look forward to hearing from you. For more info on the flagship products (Grundfos ALPHA pumps) within this product line, please visit: https: dk.grundfos.com training-events webinarer alpha2og3-webinar.html

Do you want to enter a key product management role, where you will have the opportunity to affect the Grundfos customer value footprint to the highest extent?
Then take on a central position in our Building Services division where you will ensure that the small frequency controlled ALPHA products has the right product portfolio in place. The key cornerstone of this role is to assign the right portfolio direction based on in-house knowledge combined with new opportunities by working structured with customer pains and radical innovation to create value in domestic HVAC applications. 

Ensure the right long-term product portfolio
As Product Line Manager in the Circulator program, you will be collaborating closely internally with our sales and development organization and externally with customers, industry experts and regional business development setups.

Jacob, the hiring manager has the following statement about the role:
“Our small UPE (Electronically controlled circulator pumps for Domestic Building Services) product line is a high attention area within Grundfos where excellent portfolio management, execution mindset and analytic due diligence on future roadmaps will be noticed and rewarded within all functions of Grundfos.
The task is not only focussed around the product but also the different systems and offerings which can merge into a creation of higher customer value – so if you have the will to think outside the box on a box-product sold through wholesales, the chance is definitely present within this opportunity”   


As such, you will be the central hub in the organization for gathering information from all relevant sources and translate it into a strong product roadmap. In short, your responsibility will be to:
 

-Drive and lead the 5-year Product Roadmap linked to the overall strategy
-Gain and consolidate a deep understanding of the customer experience
-Identify and specify new projects based on customer and market input and validate in business cases
-Collect, consolidate and analyse competitor and market data and propose actions
-Support development projects from a commercial angle
-Scope and Prioritize Product Lifecycle management activities
-Communicate the product roadmap, overall product strategy and application knowledge to relevant stakeholders internally and externally 
-Strong technical competences with commercial flair 

You are among the core professionals in our building Services division, with a solid commercial mindset and the ability to understand technical matters quickly. On a personal level, you thrive in diverse work processes and can build wide and effective networks both inside and outside the organisation. You are an excellent communicator and work well in a pressurised environment cooping constructively with setbacks and challenges. You relate well to people at all levels and by being quick to engage with, creating trust and by identifying exactly where value can be created for customers and Grundfos in a complex array of business challenges.

You are among business development- and technical manager colleagues, highly specialised as well as highly competent in all its general aspects. On a personal level, you thrive in diverse work processes and can seamlessly join new teams when the need arises. Having excellent leadership and managing skills, you are quick to engage with, create trust, and identify exactly where value can be created in a complex array of business challenges. 

-You have several years of relevant work experience and solid knowledge in working product management from a commercial angle
-You preferably have industry experience within HVAC for the domestic buildings segment and are familiar with working in a large manufacturing environment
-You either possess a master’s degree in business development engineering and have technical flair or an Engineering Degree and at the same time have a           commercial mindset (preferably backed up by commercial courses)
-Proficiency in English, verbally and written, is a must

Additional information
If you have questions or want to know more about the position, please contact Program Director for Circulators, Jacob Naldal, on +45 29471127.

If this job sounds appealing to you, please send your resume and cover letter today and no later than February 14, 2020 by clicking on “Apply”. 

We look forward to hearing from you.

For more info on the flagship products (Grundfos ALPHA pumps) within this product line, please visit: https://dk.grundfos.com/training-events/webinarer/alpha2og3-webinar.html

GRUNDFOS HOLDING A/SBjerringbro2020-01-15T00:00:002020-02-14T00:00:00
330152559Baseband Manufacturing EngineerRobot Ambitious Space Company is looking for a skilled Baseband Electronics Manufacturing Engineer For our Manufacturing team, we a looking for a Manufacturing Engineer with experience in baseband electronics. You will have the opportunity to become part of an internationally oriented and dedicated team aiming at providing exceptional Nanosatellite solutions to customers on the global market. The Job Incluces the Following Set of Tasks: -Ensure manufacturability of our standard products-Maintenance Enhancement of our standard products-Customize standard products to customer needs-Introduce new products in production-Provide guidance to engineering regarding manufacturability-First line technical support for customers and internal departments-Participate in reviews of space craft designs from an electrical point of view-Prototyping and verification hands-on in the laboratory We expect the Employee to Have the Following Qualifications: -Relevant technical education, at least a Bachelor degree or similar-Work experience with production preparation activities-Work experience in hardware electronic design and product development-Experience in Schematic and PCB design tools (Altium or similar)-Experience working in a laboratory and electronic production-Experience with Linux and Python-Experience with product environmental qualification tests.-You are working in a structured way, with a quality-oriented mindset-Enjoys working in a busy and sometimes hectic day-Fluent in English at a professional level-Experience with high reliability products-Working closely together with other engineering skill groups and production GomSpace offers employment in a dynamic growing and internationally oriented company with many challenging and exciting activities. We are an agenda-setting player in the nanosatellite business and expect our employees to contribute with dedication, skills and the will to implement our mission. We are ambitious and believe that nanosatellites and our efforts will make a difference to society in the future. We have an informal working culture with transparent communication and an organisation built up by multidisciplinary skills and engineering passion which we believe are essential to help our customers achieve their goals in space. Sign Up for Our Mission: You are welcome to send your application in either Danish or English. Interviews will be conducted on a continuous basis. If you have any questions with regard to the position do not hesitate to contact Lars Vestergaard on 45 51907545 or lav@gomspace.com Work place will be in our premises at Langagervej 6, Aalborg, Denmark. Salary and start date will be individually negotiated. We kindly draw your attention to the fact that we do not receive applications and resumes via e-mail or by personal appearance. This is to protect and show consideration for your personal information. Apply for the job by following the link below. About GomSpace GomSpace is a globally leading designer, integrator and manufacturer of high-end nanosatellites for customers in the academic, government and commercial markets.Our positions of strength include systems integration, nanosatellite subsystems and advanced miniaturised radio technology. Our international team is devoted to understanding our customer s requirements and deliver flawlessly. We are listed in Stockholm (GOMX), headquartered in Denmark and have subsidiaries in Sweden, Singapore, North America and Luxembourg. We are more than 200 employees servicing customers in more than 55 countries. Learn more on www.gomspace.com Application deadline:24. januar 2020

Ambitious Space Company is looking for a skilled Baseband Electronics Manufacturing Engineer

For our Manufacturing team, we a looking for a Manufacturing Engineer with experience in baseband electronics. You will have the opportunity to become part of an internationally oriented and dedicated team aiming at providing exceptional Nanosatellite solutions to customers on the global market.

The Job Incluces the Following Set of Tasks:

-Ensure manufacturability of our standard products-Maintenance/Enhancement of our standard products-Customize standard products to customer needs-Introduce new products in production-Provide guidance to engineering regarding manufacturability-First line technical support for customers and internal departments-Participate in reviews of space craft designs from an electrical point of view-Prototyping and verification hands-on in the laboratory

We expect the Employee to Have the Following Qualifications:

-Relevant technical education, at least a Bachelor degree or similar-Work experience with production preparation activities-Work experience in hardware electronic design and product development-Experience in Schematic and PCB design tools (Altium or similar)-Experience working in a laboratory and electronic production-Experience with Linux and Python-Experience with product environmental qualification tests.-You are working in a structured way, with a quality-oriented mindset-Enjoys working in a busy and sometimes hectic day-Fluent in English at a professional level-Experience with high reliability products-Working closely together with other engineering skill groups and production

GomSpace offers employment in a dynamic growing and internationally oriented company with many challenging and exciting activities. We are an agenda-setting player in the nanosatellite business and expect our employees to contribute with dedication, skills and the will to implement our mission. We are ambitious and believe that nanosatellites and our efforts will make a difference to society in the future. We have an informal working culture with transparent communication and an organisation built up by multidisciplinary skills and engineering passion which we believe are essential to help our customers achieve their goals in space.

Sign Up for Our Mission:

You are welcome to send your application in either Danish or English. Interviews will be conducted on a continuous basis. If you have any questions with regard to the position do not hesitate to contact Lars Vestergaard on +45 51907545 or lav@gomspace.com

Work place will be in our premises at Langagervej 6, Aalborg, Denmark. Salary and start date will be individually negotiated.

We kindly draw your attention to the fact that we do not receive applications and resumes via e-mail or by personal appearance. This is to protect and show consideration for your personal information. Apply for the job by following the link below.

About GomSpace | GomSpace is a globally leading designer, integrator and manufacturer of high-end nanosatellites for customers in the academic, government and commercial markets.Our positions of strength include systems integration, nanosatellite subsystems and advanced miniaturised radio technology. Our international team is devoted to understanding our customer’s requirements and deliver flawlessly. We are listed in Stockholm (GOMX), headquartered in Denmark and have subsidiaries in Sweden, Singapore, North America and Luxembourg. We are more than 200 employees servicing customers in more than 55 countries. Learn more on www.gomspace.com

Application deadline:24. januar 2020

GOMSPACE A/SAalborg Øst2020-01-09T00:00:002020-01-24T00:00:00
da-DK

Andre job der matcher din søgning

Sr. Product Line Manager within Circulators

GRUNDFOS HOLDING A/S

Bjerringbro
Do you want to enter a key product management role, where you will have the opportunity to affect the Grundfos customer value footprint to the highest extent? Then take on a central position in our Building Services division where you will ensure th...
Indrykket:15. januar 2020

Baseband Manufacturing Engineer

GOMSPACE A/S

Aalborg Øst
Ambitious Space Company is looking for a skilled Baseband Electronics Manufacturing Engineer For our Manufacturing team, we a looking for a Manufacturing Engineer with experience in baseband electronics. You will have the opportunity to become part ...
Indrykket:9. januar 2020