H&S Specialist to ensure global machine/electrical safety

Do you want to make your mark on a newly established position where you develop, support and implement H&S best practices within machine and electrical safety globally?

 

In this role, you get to drive the development and provide input for the global strategical effort to improve health and safety in Grundfos. H&S is a high focus area and has top priority across our many companies all over the world.

 

“Once you experience just how highly Grundfos prioritise H&S across the organization, you cannot help but be inspired and motivated to bring your ideas to the table and work hard to push them through,” says Senior Manager H&S CoE, Marie Kloppenborg Jensen.

 

Welcome to Grundfos H&S
You will be part of the Grundfos H&S Center of excellence in Group EHS in Bjerringbro. Here, you have no direct reports, but you will inspire and drive a dedicated expert team. The H&S Center of excellence support the corporation globally and provide tools and best H&S practices. Our initiatives benefit and ensure maximum safety for employees at all levels of the organization.

 

What is the job about?
You will drive global development and standardisation of best practices that ensure the safety of Grundfos employees globally. This includes continuously developing our business processes to support development of safe tools, technologies and practices. Your key responsibilities will be to:

 

  • Support H&S risk assessments of new developments, digitalisation projects and technology transfers
  • Drive an expert team anchored in H&S CoE to ensure that competencies within your area of expertise are available to the broader EHS community
  • Tailor and develop standards, tools, procedures and trainings to ensure valid minimum requirements and benchmarks across the organization
  • Cooperate with and support the global organization and in particular the regional EHS managers, via e.g. workshops, trainings and audits
  • Increase H&S awareness and support the development a safety-minded approach across the Grundfos group

 

You can expect approx. 30 days of travel yearly as you help implement best practices and H&S tools and processes globally.

 

What do you need to apply?
You have a background within machine and/or electrical safety, and you are good at organizing and deploying your initiatives. Moreover, you:

 

  • Hold a relevant degree within marine engineering, technology management, electrical or mechanical engineering. Alternatively, you have an education as electrician or mechanician as well as experience from the EHS area
  • Have at least 3 years of experience within the health and safety area and experience in driving H&S initiatives/projects
  • Have knowledge of the Machinery directive 2006/42/EF
  • Have excellent communication skills in English – oral and written
  • Have experience working within an international organization and practical experience from working with mechanical/electrical installations is an advantage

 

Additional information
If you have questions or want to know more about the position, please contact Senior Manager HS CoE, Marie Kloppenborg Jensen on +45 4043 0349.

 

If this job sounds appealing to you, please send your resume and cover letter today and no later than 25 February 2018 by clicking on “Apply”. We expect interviews to be held during week 11.

 

We look forward to hearing from you.


Du har ikke vedlagt dokumenter til din ansøgning. Klik på 'OK' knappen nedenfor for at sende din ansøgning alligevel, eller klik på knappen "Annuller" og vedhæft dokumenter, før du sender din ansøgning igen.

Ikke det rigtige job?

Opret en jobagent og få dit nye job direkte i indbakken



Opret jobagent her

Andre job der matcher din søgning

Indrykket:31. januar 2018
Udløbsdato:25. februar 2018

Daglig leder ved Helikopter Wing Karup, A4 Logistic Light Support Helico

Civile stillinger

Helikopter Wing Karup har brug for en ambitiøs og erfaren tekniker til at lede den materielfaglige drift samt sagsbehandling på Flyvevåbnets FENNEC og SEAHAWK helikoptere samt T-17 træningsfly. Stillingen kræver stærke ledelsesmæssige kompetencer, g...
Indrykket:15. februar 2018
Udløbsdato:12. marts 2018

Erfaren glasfiber konstruktør søges til længere projekt

Uni Consulting

Odder
Til et projekt søger vi en erfaren glasfiber konstruktør Opgave: 3D konceptarbejde, solid viden om konstruktionsprincipper for design i glasfiber. Du har erfaring i at arbejde med kernemateriale, laminatplan, samlemetoder, tolerancesætning, produkti...
Indrykket:16. februar 2018
Udløbsdato:16. marts 2018

Maskiningeniør søges til DAN-Doors A/S i Skanderborg

JKS A/S

Trives du med en alsidig arbejdsdag, hvor der til stadighed er udviklingsmuligheder i jobbet, hvor arbejdet består af en bred vifte af opgaver - lige fra tegningsændringer og konstruktion til udvikling af eksisterende og nye produkter? Så er det mås...
Indrykket:9. januar 2018
Udløbsdato:27. februar 2018

Maskiningeniør til mekanisk udvikling - Valby.

TECH INVENT A/S

Tech Invent A S søger en engageret og ambitiøs maskiningeniør med en stærk faglig profil til vores afdeling i Valby. Tech Invent A S er en ingeniørvirksomhed, som er stiftet med det formål at fremme den teknologiske udvikling med udgangspunkt i en k...
Indrykket:9. januar 2018
Udløbsdato:1. marts 2018

Teknisk konsulent - SOLIDWORKS

AKTIV HR ApS

Har du erfaring med 3D CAD Software, og ønsker du at arbejde med uddannelse og support fra et leverandørperspektiv? VIRKSOMHEDENVores kunde er en professionel og udviklingsorienteret virksomhed i vækst, som i dag beskæftiger 14 medarbejdere fordelt ...