Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

HV/MV Engineer for building transmission systems for offshore wind farms

Would you like to help us ensure high quality, efficiency and continuous development within wind power in building the future transmission systems for our offshore wind farms?  

Join us and become our new HV/MV Engineer in the Transformers & HV Components department (THC) where you’ll be responsible for the HV components in the transmission system between the wind turbines offshore and the grid onshore, ensuring grid connection to offshore windfarms.   

Together with competent colleagues, you’ll provide electrical engineering services to our offshore wind projects worldwide. In the THC team, we’re responsible for the design, procurement, contract execution and final handover to OFTO and O&M as regards HV components, e.g. switchgears, transformers, reactors, filters and protection systems.  

Your key task will be to 

  • collaborate and coordinate tasks with project members and suppliers of HV components 
  • align and optimise electrical and physical interfaces with key stakeholders such as the structural engineering department etc. 
  • ensure the quality of HV component deliverables and progress in compliance with project schedules and budgets 
  • develop technical requirements and tender documents, run and evaluate tenders, execute contracts and perform detailed design together with our suppliers for HV components 
  • coordinate during FAT, installation, SAT, SIT, energisation and commissioning of substations. 

 Your competences include that you 

  • have a relevant bachelor’s or master’s degree in electrical engineering with a thesis in high-voltage power 
  • understand electrical system design requirements and solutions in HV transmission systems 
  • have experience with scope management and project execution with HV components and transmission systems, ensuring projects are delivered within the required schedule, cost, scope and quality 
  • have personal drive combined with a structured, proactive and responsible approach to your work 
  • have an extrovert personality, collaborative approach and thrive on teamwork as you’ll be performing cross-disciplinary work and cooperating with colleagues and external business partners 
  • speak and write English fluently. 

You’re totally excited about working in a strong global environment with colleagues, suppliers and projects all over the world. You enjoy traveling and might also be driven by the opportunity to be expatriated.  

You enjoy sharing your knowledge with both your colleagues in the project group and the entire department.   

Furthermore, it’s an advantage, if your professional skills are based on relevant work experience with 150kV-400kV substations.  

Working at Ørsted 

To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential.   

Would you like to help shape the renewable technologies of the future?

Send your application to us as soon as possible, as we’ll be screening and conducting interviews on a continuous basis. 

For Denmark, please don’t hesitate to contact Ole Kjær, Manager of Transformer & HV Components, by telephone on +45 99 55 54 17 if you’d like to know more about the position.  

For the United Kingdom, please don’t hesitate to contact the Recruitment Specialist by email on ukrecruitment@orsted.co.uk.  

All UK-based positions will be subject to satisfactory pre-employment screening, further details will be given at offer stage.  

Please note that for your application to be taken into consideration, you must submit your application via our online career pages.  

You should expect some travelling in relation to your work.  

About Ørsted 

Headquartered in Denmark, Ørsted’s 5,800 employees develop, construct and operate offshore wind farms, bioenergy plants and innovative waste-to-energy solutions and provide smart energy products to its customers. Ørsted Wind Power’s 2,200 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we’re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com. 


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330021908Phoenix-7e6e327a12019-06-03T00:00:00HV/MV Engineer for building transmission systems for offshore wind farms

Would you like to help us ensure high quality, efficiency and continuous development within wind power in building the future transmission systems for our offshore wind farms?  

Join us and become our new HV/MV Engineer in the Transformers & HV Components department (THC) where you’ll be responsible for the HV components in the transmission system between the wind turbines offshore and the grid onshore, ensuring grid connection to offshore windfarms.   

Together with competent colleagues, you’ll provide electrical engineering services to our offshore wind projects worldwide. In the THC team, we’re responsible for the design, procurement, contract execution and final handover to OFTO and O&M as regards HV components, e.g. switchgears, transformers, reactors, filters and protection systems.  

Your key task will be to 

  • collaborate and coordinate tasks with project members and suppliers of HV components 
  • align and optimise electrical and physical interfaces with key stakeholders such as the structural engineering department etc. 
  • ensure the quality of HV component deliverables and progress in compliance with project schedules and budgets 
  • develop technical requirements and tender documents, run and evaluate tenders, execute contracts and perform detailed design together with our suppliers for HV components 
  • coordinate during FAT, installation, SAT, SIT, energisation and commissioning of substations. 

 Your competences include that you 

  • have a relevant bachelor’s or master’s degree in electrical engineering with a thesis in high-voltage power 
  • understand electrical system design requirements and solutions in HV transmission systems 
  • have experience with scope management and project execution with HV components and transmission systems, ensuring projects are delivered within the required schedule, cost, scope and quality 
  • have personal drive combined with a structured, proactive and responsible approach to your work 
  • have an extrovert personality, collaborative approach and thrive on teamwork as you’ll be performing cross-disciplinary work and cooperating with colleagues and external business partners 
  • speak and write English fluently. 

You’re totally excited about working in a strong global environment with colleagues, suppliers and projects all over the world. You enjoy traveling and might also be driven by the opportunity to be expatriated.  

You enjoy sharing your knowledge with both your colleagues in the project group and the entire department.   

Furthermore, it’s an advantage, if your professional skills are based on relevant work experience with 150kV-400kV substations.  

Working at Ørsted 

To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential.   

Would you like to help shape the renewable technologies of the future?

Send your application to us as soon as possible, as we’ll be screening and conducting interviews on a continuous basis. 

For Denmark, please don’t hesitate to contact Ole Kjær, Manager of Transformer & HV Components, by telephone on +45 99 55 54 17 if you’d like to know more about the position.  

For the United Kingdom, please don’t hesitate to contact the Recruitment Specialist by email on ukrecruitment@orsted.co.uk.  

All UK-based positions will be subject to satisfactory pre-employment screening, further details will be given at offer stage.  

Please note that for your application to be taken into consideration, you must submit your application via our online career pages.  

You should expect some travelling in relation to your work.  

About Ørsted 

Headquartered in Denmark, Ørsted’s 5,800 employees develop, construct and operate offshore wind farms, bioenergy plants and innovative waste-to-energy solutions and provide smart energy products to its customers. Ørsted Wind Power’s 2,200 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we’re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com. 

2019-06-16T00:50:49.800 Would you like to help us ensure high quality, efficiency and continuous development within wind power in building the future transmission systems for our offshore wind farms? Join us and become our new HV MV Engineer in the Transformers HV Components department (THC) where you ll be responsible for the HV components in the transmission system between the wind turbines offshore and the grid onshore, ensuring grid connection to offshore windfarms. Together with competent colleagues, you ll provide electrical engineering services to our offshore wind projects worldwide. In the THC team, we re responsible for the design, procurement, contract execution and final handover to OFTO and O M as regards HV components, e.g. switchgears, transformers, reactors, filters and protection systems. Your key task will be to collaborate and coordinate tasks with project members and suppliers of HV components align and optimise electrical and physical interfaces with key stakeholders such as the structural engineering department etc. ensure the quality of HV component deliverables and progress in compliance with project schedules and budgets develop technical requirements and tender documents, run and evaluate tenders, execute contracts and perform detailed design together with our suppliers for HV components coordinate during FAT, installation, SAT, SIT, energisation and commissioning of substations. Your competences include that you have a relevant bachelor s or master s degree in electrical engineering with a thesis in high-voltage power understand electrical system design requirements and solutions in HV transmission systems have experience with scope management and project execution with HV components and transmission systems, ensuring projects are delivered within the required schedule, cost, scope and quality have personal drive combined with a structured, proactive and responsible approach to your work have an extrovert personality, collaborative approach and thrive on teamwork as you ll be performing cross-disciplinary work and cooperating with colleagues and external business partners speak and write English fluently. You re totally excited about working in a strong global environment with colleagues, suppliers and projects all over the world. You enjoy traveling and might also be driven by the opportunity to be expatriated. You enjoy sharing your knowledge with both your colleagues in the project group and the entire department. Furthermore, it s an advantage, if your professional skills are based on relevant work experience with 150kV-400kV substations. Working at Ørsted To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential. Would you like to help shape the renewable technologies of the future? Send your application to us as soon as possible, as we ll be screening and conducting interviews on a continuous basis. For Denmark, please don t hesitate to contact Ole Kjær, Manager of Transformer HV Components, by telephone on 45 99 55 54 17 if you d like to know more about the position. For the United Kingdom, please don t hesitate to contact the Recruitment Specialist by email on ukrecruitment@orsted.co.uk. All UK-based positions will be subject to satisfactory pre-employment screening, further details will be given at offer stage. Please note that for your application to be taken into consideration, you must submit your application via our online career pages. You should expect some travelling in relation to your work. About Ørsted Headquartered in Denmark, Ørsted s 5,800 employees develop, construct and operate offshore wind farms, bioenergy plants and innovative waste-to-energy solutions and provide smart energy products to its customers. Ørsted Wind Power s 2,200 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com.11jobnet7e6e327a100000000000IDK_OFIR_02DKDanmark228DKK2019-06-15T00:00:000000https://wwwsecure.lego.com/da-dk/careers/jobdescription/privacy-officer/568988650EuropaDanmarkJyllandSyd- og SønderjyllandVejleEuropaDanmarkJyllandSyd- og SønderjyllandFredericia3524966Ørsted A/S11Kraftværksvej 537000FredericiaDKDanmark0DKDanmarkDKDanmark8Fuldtid46Permanent758865JobNet4987524498752410010-05-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=7e6e327ahttps://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=7e6e327ahttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=7e6e327a&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=7e6e327a&page=EmailApplyForm&component=SendApplicationButtonhttps://static.matchwork.com/company/logo/DK/ORS/SoMe/IT_Ingenioer_og_energi/Ingenioer_og_naturvidenskab/3.jpgHV/MV Engineer for building transmission systems for offshore wind farms12008001Dansk3Læse/ tale214402Elektroingeniør20Ingeniør og naturvidenskab361761157noreply@ofir.comDKDanmarkDKDanmark330158160Electrical Engineering Manager for our offshore substation for offshore wind farmsRobot Would you like to take up the technical challenges related to offshore substation design and construction of offshore wind farms? Join us and become Electrical Engineering Manager in Substation Electrical Commissioning Management where you, along with your colleagues, will be responsible for electrical design, installations and commissioning management of electrical installations. The team consists of nine committed colleagues, and each employee works on their own project as technical project scope manager. Here they manage a team of electrical engineers to ensure our subcontractors meet our requirements for the design of LV U MV HV components and SCADA for an offshore substation. Your key tasks will be to coordinate tasks between project participants and suppliers within the electrical and utility field be accountable for projects electrical design and installation as well as to prepare technical requirements with your team coordinate and manage specialists in a project follow up on time schedules, progress and results from consultants and contractors participate in project team meetings and clarification and negotiation meetings with contractors. Your competences include that you hold a relevant degree in electrical engineering and are interested in working with electrical design for offshore substations have professional knowledge based on extensive relevant technical project management experience as well as commercial experience and, preferably, experience with PMI terms have knowledge of electrical power transmission systems, preferably including offshore experience speak and write English fluently, as we operate in an international environment have a strong analytical approach, enabling you to handle a range of complex tasks quickly. Working at Ørsted Our vision is to create a world that runs entirely on green energy. This ambitious goal relies on maximising the talents of a truly inclusive workforce that brings diversity of thought, perspective, knowledge and background to our business. To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential. Would you like to help shape the renewable technologies of the future? Send your application to us as soon as possible and no later than 28 February 2020, as we ll be conducting interviews on a continuous basis. Please don t hesitate to contact Jannick Elmbæk Olsen, Senior Manager of Offshore Electrical Engineering Management, by telephone on 45 99 55 51 48, if you d like to know more about the position. The employees in the department are based in Gentofte, Skærbæk and a few on sites, so you should expect some travelling in relation to your work. Since Ørsted is going global and some of our activities will be outside Europe, you should also expect expatriation of 2 years. Criminal record certificate Please note that for Danish applicants, we may procure a criminal record certificate in connection with this job, and that employment will be subject to the information listed. The criminal record certificate will only be used in the assessment if the criminal activity is of relevance to the position. About Ørsted Headquartered in Denmark, Ørsted s 6,500 employees develop, construct and operate offshore and onshore wind farms, solar farms and energy storage facilities, bioenergy plants and provide energy products to its customers. Ørsted Offshore s 2,300 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com.

Would you like to take up the technical challenges related to offshore substation design and construction of offshore wind farms?

Join us and become Electrical Engineering Manager in Substation Electrical & Commissioning Management where you, along with your colleagues, will be responsible for electrical design, installations and commissioning management of electrical installations.

The team consists of nine committed colleagues, and each employee works on their own project as technical project/scope manager. Here they manage a team of electrical engineers to ensure our subcontractors meet our requirements for the design of LV&U/MV/HV components and SCADA for an offshore substation.

Your key tasks will be to

  • coordinate tasks between project participants and suppliers within the electrical and utility field
  • be accountable for projects’ electrical design and installation as well as to prepare technical requirements with your team
  • coordinate and manage specialists in a project
  • follow up on time schedules, progress and results from consultants and contractors
  • participate in project team meetings and clarification and negotiation meetings with contractors.

Your competences include that you

  • hold a relevant degree in electrical engineering and are interested in working with electrical design for offshore substations
  • have professional knowledge based on extensive relevant technical project management experience as well as commercial experience and, preferably, experience with PMI terms
  • have knowledge of electrical power transmission systems, preferably including offshore experience
  • speak and write English fluently, as we operate in an international environment
  • have a strong analytical approach, enabling you to handle a range of complex tasks quickly.

Working at Ørsted

Our vision is to create a world that runs entirely on green energy. This ambitious goal relies on maximising the talents of a truly inclusive workforce that brings diversity of thought, perspective, knowledge and background to our business.

To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential.

Would you like to help shape the renewable technologies of the future?

Send your application to us as soon as possible and no later than 28 February 2020, as we'll be conducting interviews on a continuous basis.

Please don’t hesitate to contact Jannick Elmbæk Olsen, Senior Manager of Offshore Electrical Engineering Management, by telephone on +45 99 55 51 48, if you'd like to know more about the position.

The employees in the department are based in Gentofte, Skærbæk and a few on sites, so you should expect some travelling in relation to your work. Since Ørsted is going global and some of our activities will be outside Europe, you should also expect expatriation of 2 years.

Criminal record certificate

Please note that for Danish applicants, we may procure a criminal record certificate in connection with this job, and that employment will be subject to the information listed. The criminal record certificate will only be used in the assessment if the criminal activity is of relevance to the position.

About Ørsted

Headquartered in Denmark, Ørsted’s 6,500 employees develop, construct and operate offshore and onshore wind farms, solar farms and energy storage facilities, bioenergy plants and provide energy products to its customers. Ørsted Offshore’s 2,300 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we’re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com. 

Ørsted A/SFredericia2020-01-15T00:00:002020-02-28T00:00:00
330160075Senior Low Voltage Power Engineer for offshore substationsRobot Would you like to work for a world leader within renewable energy and take up the technical challenges regarding the design and construction of our offshore substations? Join us and become our new Senior Low Voltage Power Engineer in Substations Electrical Commissioning Management where you ll be responsible for the design and integration of low voltage (LV) and utility components into onshore offshore substations, along with 14 committed colleagues. You ll become part of a department which is responsible for LV design and installations, integration management and the commissioning management of electrical installations. Your key tasks will be to be responsible for the design of LV and utility systems on offshore substations during all phases from concept to commissioning prepare technical specifications, design basis, lists and calculations for LV and utility components for both onshore and offshore substations ensure that the deliverables from engineering, fabrication and principal contractors are of the right quality according to requirements participate in FAT SAT of main LV and utility systems on onshore and offshore substations participate in project team meetings and cross-disciplinary cooperation and to support supervision and commissioning activities as well as handover to Operation Maintenance. Furthermore, you ll proactively coordinate with other internal stakeholders to secure the inputs on time. Your competences include that you hold a relevant degree in electrical engineering and are interested in working with electrical design for onshore offshore substations have extensive relevant technical design experience, preferably within offshore substations or offshore oil and gas projects have hands-on experience with LV power system design and studies, calculations, equipment sizing and specifications have hands-on experience with tools like ETAP, FEBDOK or Dialux, ePLAN and extensive experience with relevant international standards have a strong analytical approach, enabling you to handle a range of complex tasks quickly. Moreover, you re proactive, flexible and enjoy sharing your knowledge within the project group and the entire department. Previous experience in multicultural, international projects is a plus, and you should speak and write English fluently, as we operate in an international environment. Finally, you have an extrovert personality and thrive on teamwork, as you ll be performing cross-disciplinary work and cooperating with colleagues and external business partners. Working at Ørsted Our vision is to create a world that runs entirely on green energy. This ambitious goal relies on maximising the talents of a truly inclusive workforce that brings diversity of thought, perspective, knowledge and background to our business. To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential. Would you like to help shape the renewable technologies of the future? Send your application to us as soon as possible and no later than 27 January 2020, as we ll be conducting interviews on a continuous basis. Please don t hesitate to contact Senthil Gnanasambandan, Manager of Electrical Mechanical Substations Design, by telephone on 45 99 55 73 50 if you d like to know more about the position. You should expect some travelling in relation to your work. As the organisation is expanding globally, some of our activities will be outside Europe and you should therefore also expect expatriation outside Europe. About Ørsted Headquartered in Denmark, Ørsted s 6,500 employees develop, construct and operate offshore and onshore wind farms, solar farms and energy storage facilities, bioenergy plants and provide energy products to its customers. Ørsted Offshore s 2,300 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com.

Would you like to work for a world leader within renewable energy and take up the technical challenges regarding the design and construction of our offshore substations?

Join us and become our new Senior Low Voltage Power Engineer in Substations Electrical & Commissioning Management where you’ll be responsible for the design and integration of low voltage (LV) and utility components into onshore/offshore substations, along with 14 committed colleagues.

You’ll become part of a department which is responsible for LV design and installations, integration management and the commissioning management of electrical installations.

Your key tasks will be to

  • be responsible for the design of LV and utility systems on offshore substations during all phases from concept to commissioning
  • prepare technical specifications, design basis, lists and calculations for LV and utility components for both onshore and offshore substations
  • ensure that the deliverables from engineering, fabrication and principal contractors are of the right quality according to requirements
  • participate in FAT/SAT of main LV and utility systems on onshore and offshore substations
  • participate in project team meetings and cross-disciplinary cooperation and to support supervision and commissioning activities as well as handover to Operation & Maintenance.

Furthermore, you’ll proactively coordinate with other internal stakeholders to secure the inputs on time.

Your competences include that you

  • hold a relevant degree in electrical engineering and are interested in working with electrical design for onshore/offshore substations
  • have extensive relevant technical design experience, preferably within offshore substations or offshore oil and gas projects
  • have hands-on experience with LV power system design and studies, calculations, equipment sizing and specifications
  • have hands-on experience with tools like ETAP, FEBDOK or Dialux, ePLAN and extensive experience with relevant international standards
  • have a strong analytical approach, enabling you to handle a range of complex tasks quickly.

Moreover, you’re proactive, flexible and enjoy sharing your knowledge within the project group and the entire department. Previous experience in multicultural, international projects is a plus, and you should speak and write English fluently, as we operate in an international environment. Finally, you have an extrovert personality and thrive on teamwork, as you’ll be performing cross-disciplinary work and cooperating with colleagues and external business partners.

Working at Ørsted

Our vision is to create a world that runs entirely on green energy. This ambitious goal relies on maximising the talents of a truly inclusive workforce that brings diversity of thought, perspective, knowledge and background to our business.

To be the frontrunner in the green energy transformation, we invest significantly in innovation and empower our employees to help shape the renewable energy technologies of the future. We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential.

Would you like to help shape the renewable technologies of the future?

Send your application to us as soon as possible and no later than 27 January 2020, as we’ll be conducting interviews on a continuous basis.

Please don’t hesitate to contact Senthil Gnanasambandan, Manager of Electrical & Mechanical Substations Design, by telephone on +45 99 55 73 50 if you’d like to know more about the position.

You should expect some travelling in relation to your work. As the organisation is expanding globally, some of our activities will be outside Europe and you should therefore also expect expatriation outside Europe.

About Ørsted

Headquartered in Denmark, Ørsted’s 6,500 employees develop, construct and operate offshore and onshore wind farms, solar farms and energy storage facilities, bioenergy plants and provide energy products to its customers. Ørsted Offshore’s 2,300 employees have developed and constructed the largest portfolio of offshore wind farms in Northern Europe, and we’re expanding with international activities in the US and Asia-Pacific. For more information on Ørsted, visit orsted.com. 

Ørsted A/SFredericia2020-01-17T00:00:002020-01-27T00:00:00
330135085Teknisk rådgivning og kompetenceopbygningRobot Kunne du tænke dig en nøglerolle i et udfordrende job, hvor du kan udfolde dine tekniske kompetencer og dine personlige talenter? Kan du se dig selv i rollen som rådgiver og kompetenceudvikler, og har du evnen til at sætte dig ind i kunders behov? Så er dette job lige noget for dig! I TECHLINE, et af de fire LINAK forretningsområder, vil du være med til at levere aktuatorløsninger til industrikunder i hele verden. Lige fra store globale koncerner til mindre lokale virksomheder, som igen spænder fra komplicerede elektriske løsninger til helt simple. Du vil møde en afvekslende hverdag, hvor opgaverne varierer i forhold til både kundebehov og tidsforløb. Du bliver en del af et team med 4 kolleger, der er en del af et større salgsteam på 12 medarbejdere inden for TECHLINE, der arbejder ud fra vores hovedkontor i Guderup. Derudover vil du have mange kolleger, der arbejder ud fra vores ca. 30 datterselskaber. Der er to primære fokus områder 1) at supportere og rådgive vores sælgere i relation til kundebehov og løsninger, 2) at løfte kompetenceniveauet blandt vores TECHLINE sælgere indenfor udvalgte teknologier og eller geografiske områder særligt i forbindelse med introduktion af nye produkter og teknologier. Arbejdsopgaver support og rådgivning Omsætte kundens behov og forespørgsel til en værdiskabende LINAK løsning Teknisk og kommerciel support til vores datterselskaber i forbindelse med deres salgsarbejde Kundebesøg sammen med vores lokale sælgere, hvor du med din viden hjælper med at afklare tekniske spørgsmål og guider kunden sikkert i mål Ledelse af mindre projekter i forbindelse med løsningen af kundeprojekter, der involverer de forskellige arbejdsfunktioner på fabrikken Arbejdsopgaver - kompetenceudvikling Deltage i R D projekter dels som repræsentant for salg kunden og dels for at suge viden, som du bruger til at klæde sælgerne på i den efterfølgende implementering Aktivt jagte relevant viden i huset og formidle den viden til relevante kolleger og sælgere i den globale salgsorganisation Gennemføre on-the-job træning. Eksempelvis ved at deltage i kundebesøg sammen med udvalgte sælgere, hvor du viser, hvordan teknologi produkt fungerer, så sælger bliver i stand til selv at vise og forklare tekniske muligheder baseret på kundens situation Udvikle, coache og udfordre sælgere i deres daglige arbejde eks. i forbindelse med kundebesøg og herunder i samarbejde med den lokale ledelse følge op på sælgernes udvikling Udvælge og udvikle træningsmateriale alene eller i samarbejde med kolleger i TECHLINE og HR Du har en elektronik uddannelse kombineret med nogle års erfaring brænder for teknik, og nyder at se dig selv i rollen som rådgiver har let ved at komme i kontakt med mennesker og er god til at opbygge netværk motiveres af at opsøge viden og udvikle dine kollegers tekniske kompetencer er indstillet på at arbejde i et travlt miljø med skiftende prioriteringer og mange input har lyst til at være en del af et uformelt arbejdsmiljø med let til grin i hverdagen er god til at kommunikere på dansk og engelsk i skrift og tale trives med 40-50 dages rejseaktivitet årligt Vi tilbyder et spændende job i et område, der oplever stor vækst og forventer, at væksten forsætter i de kommende år. Der vil være rig mulighed for at udvikle sig i jobbet. Du vil arbejde i et internationalt miljø med mange daglige kontaktflader, og hvor du via dit initiativ og drive kan sætte dit præg på den fortsatte TECHLINE udvikling. Har du spørgsmål til stillingen, er du velkommen til at kontakte Manager, SBU TECHLINE, Peter Vestergaard på 73 15 14 19 eller 50 77 10 42. Ansøgninger vurderes løbende og stillingen lukkes, når den rette kandidat er fundet. (Eventuelle ansøgningsfrister er systemgenererede og er ikke fastsat af LINAK). LINAK A S Group Headquarters, Smedevænget 8, Guderup, DK-6430 Nordborg

Kunne du tænke dig en nøglerolle i et udfordrende job, hvor du kan udfolde dine tekniske kompetencer og dine personlige talenter? Kan du se dig selv i rollen som rådgiver og kompetenceudvikler, og har du evnen til at sætte dig ind i kunders behov? Så er dette job lige noget for dig!

I TECHLINE, et af de fire LINAK forretningsområder, vil du være med til at levere aktuatorløsninger til industrikunder i hele verden. Lige fra store globale koncerner til mindre lokale virksomheder, som igen spænder fra komplicerede elektriske løsninger til helt simple. Du vil møde en afvekslende hverdag, hvor opgaverne varierer i forhold til både kundebehov og tidsforløb.

Du bliver en del af et team med 4 kolleger, der er en del af et større salgsteam på 12 medarbejdere inden for TECHLINE, der arbejder ud fra vores hovedkontor i Guderup. Derudover vil du have mange kolleger, der arbejder ud fra vores ca. 30 datterselskaber. Der er to primære fokus områder – 1) at supportere og rådgive vores sælgere i relation til kundebehov og løsninger, 2) at løfte kompetenceniveauet blandt vores TECHLINE sælgere indenfor udvalgte teknologier og/eller geografiske områder – særligt i forbindelse med introduktion af nye produkter og teknologier.

Arbejdsopgaver – support og rådgivning

  • Omsætte kundens behov og forespørgsel til en værdiskabende LINAK løsning
  • Teknisk og kommerciel support til vores datterselskaber i forbindelse med deres salgsarbejde
  • Kundebesøg sammen med vores lokale sælgere, hvor du med din viden hjælper med at afklare tekniske spørgsmål og guider kunden sikkert i mål
  • Ledelse af mindre projekter i forbindelse med løsningen af kundeprojekter, der involverer de forskellige arbejdsfunktioner på fabrikken

Arbejdsopgaver - kompetenceudvikling

  • Deltage i R&D projekter dels som repræsentant for salg/kunden og dels for ”at suge” viden, som du bruger til at klæde sælgerne på i den efterfølgende implementering
  • Aktivt ”jagte” relevant viden i huset og formidle den viden til relevante kolleger og sælgere i den globale salgsorganisation
  • Gennemføre on-the-job træning. Eksempelvis ved at deltage i kundebesøg sammen med udvalgte sælgere, hvor du viser, hvordan teknologi/produkt fungerer, så sælger bliver i stand til selv at vise og forklare tekniske muligheder baseret på kundens situation
  • Udvikle, coache og udfordre sælgere i deres daglige arbejde – eks. i forbindelse med kundebesøg – og herunder i samarbejde med den lokale ledelse følge op på sælgernes udvikling
  • Udvælge og udvikle træningsmateriale – alene eller i samarbejde med kolleger i TECHLINE og HR

Du

  • har en elektronik uddannelse kombineret med nogle års erfaring
  • brænder for teknik, og nyder at se dig selv i rollen som rådgiver
  • har let ved at komme i kontakt med mennesker og er god til at opbygge netværk
  • motiveres af at opsøge viden og udvikle dine kollegers tekniske kompetencer
  • er indstillet på at arbejde i et travlt miljø med skiftende prioriteringer og mange input
  • har lyst til at være en del af et uformelt arbejdsmiljø med let til grin i hverdagen
  • er god til at kommunikere på dansk og engelsk i skrift og tale
  • trives med 40-50 dages rejseaktivitet årligt

Vi tilbyder et spændende job i et område, der oplever stor vækst og forventer, at væksten forsætter i de kommende år. Der vil være rig mulighed for at udvikle sig i jobbet.

Du vil arbejde i et internationalt miljø med mange daglige kontaktflader, og hvor du via dit initiativ og drive kan sætte dit præg på den fortsatte TECHLINE udvikling. 

Har du spørgsmål til stillingen, er du velkommen til at kontakte Manager, SBU TECHLINE, Peter Vestergaard på 73 15 14 19 eller 50 77 10 42.

Ansøgninger vurderes løbende og stillingen lukkes, når den rette kandidat er fundet. (Eventuelle ansøgningsfrister er systemgenererede og er ikke fastsat af LINAK).

LINAK A/S
Group Headquarters,
Smedevænget 8, Guderup,
DK-6430 Nordborg

LINAK A/SNordborg2019-12-12T00:00:002020-01-29T00:00:00
330158418Electronics EngineerRobot DK, Hammel Professional Full-Time ID: 6185 Do you want to accelerate your career within electronics testing and help save the world? We are looking for a person with an easy laugh and great energy, who waits to be one of the best within electronic testing. Is that you? Then have a look at this opportunity to work with skilled colleagues that give space for you to create value and help develop your competencies in the energy industry s global partner on sustainable energy solutions. Manufacturing Global Procurement Converters Controls Test Engineering The Electronics team covers test of electronics in the Converters Controls segment in Vestas Manufacturing with interfaces to and cooperation with Vestas R D and the electronics factory in Hammel, Denmark. The team is responsible for developing test equipment including test sequences for new as well as existing electronics products in the Vestas portfolio. The projects are executed in a team with clear responsibilities, but with many opportunities to develop with others. The primary function is to translate test specifications from R D into test equipment that can plug directly into a production line and subsequently support any update or improvement, day-to-day support is handled by a Technical Support function. The department places high focus on an informal working environment and team work. We consistently score high on team collaboration in our employee surveys. You will get five close employees who all are dedicated to the development of electronics testing. Responsibilities Take lead and responsibility for developing module and PCB test equipment Specify fixture HW (high-level) to be developed by external suppliers Develop, maintain and improve test sequences Be a great team member Qualifications If you can undertake the above responsibilities, you have the right qualifications! We do imagine that you have gained these qualifications from: An educational background in Electronics Engineering from a university or apprenticeship and minimum 5 years of proven experience with hands-on development of electronic equipment Knowledge of impedance matching in complex measurements Experiences in measurement theory (measurement capability and uncertainty) Experiences with reading and writing schematics, PCB layout skills will be preferred (Altium) Boundary Scan experience Programming in LabView and test sequence skills is an advantage Experience from complex and long-lived products Competencies We can give you the experience you need, if you have the right thrive and personality. We are looking for a person with: High degree of flexibility and who can work independently High drive and eager to deliver high quality A proactive attitude - not afraid to grab a soldering iron An analytical mindset Persistence when it comes to finding the right solution What we offer We offer an inspiring workplace with excellent professional and personal development opportunities in a work environment with competent open-minded colleagues which will allow you to develop and at the same time influence on our solutions. We have an eclectic mix of experience and skills, working together to make Vestas vision a reality. Join Vestas and you will find yourself working in a spirit of worldwide collaboration while enjoying the knowledge that you are making a positive difference. Additional information Primary work location will be in Hammel, Denmark. Work on our other locations in DK must be expected in shorter periods. Travel activity will vary depending on our projects. Approximately 20 days of travelling abroad per year must be expected. For additional information on the position, please contact Director, Allan Pedersen at 45 22 74 30 93.

DK, Hammel | Professional | Full-Time | ID: 6185 

Do you want to accelerate your career within electronics testing and help save the world? We are looking for a person with an easy laugh and great energy, who waits to be one of the best within electronic testing. Is that you? 
Then have a look at this opportunity to work with skilled colleagues that give space for you to create value and help develop your competencies in the energy industry's global partner on sustainable energy solutions.

Manufacturing & Global Procurement > Converters & Controls > Test Engineering
The Electronics team covers test of electronics in the Converters & Controls segment in Vestas Manufacturing with interfaces to and cooperation with Vestas R&D and the electronics factory in Hammel, Denmark. 

The team is responsible for developing test equipment including test sequences for new as well as existing electronics products in the Vestas portfolio. The projects are executed in a team with clear responsibilities, but with many opportunities to develop with others. The primary function is to translate test specifications from R&D into test equipment that can plug directly into a production line and subsequently support any update or improvement, day-to-day support is handled by a Technical Support function. 

The department places high focus on an informal working environment and team work. We consistently score high on team collaboration in our employee surveys. You will get five close employees who all are dedicated to the development of electronics testing.

Responsibilities

  • Take lead and responsibility for developing module and PCB test equipment
  • Specify fixture HW (high-level) to be developed by external suppliers
  • Develop, maintain and improve test sequences
  • Be a great team member

Qualifications
If you can undertake the above responsibilities, you have the right qualifications! We do imagine that you have gained these qualifications from:

  • An educational background in Electronics Engineering from a university or apprenticeship and minimum 5 years of proven experience with hands-on development of electronic equipment
  • Knowledge of impedance matching in complex measurements
  • Experiences in measurement theory (measurement capability and uncertainty)
  • Experiences with reading and writing schematics, PCB layout skills will be preferred (Altium)
  • Boundary Scan experience
  • Programming in LabView and test sequence skills is an advantage 
  • Experience from complex and long-lived products

Competencies
We can give you the experience you need, if you have the right thrive and personality. We are looking for a person with:   

  • High degree of flexibility and who can work independently
  • High drive and eager to deliver high quality  
  • A proactive attitude - not afraid to grab a soldering iron
  • An analytical mindset 
  • Persistence when it comes to finding the right solution 

What we offer
We offer an inspiring workplace with excellent professional and personal development opportunities in a work environment with competent open-minded colleagues which will allow you to develop and at the same time influence on our solutions.

We have an eclectic mix of experience and skills, working together to make Vestas’ vision a reality. Join Vestas and you will find yourself working in a spirit of worldwide collaboration while enjoying the knowledge that you are making a positive difference. 

Additional information
Primary work location will be in Hammel, Denmark. 

Work on our other locations in DK must be expected in shorter periods. Travel activity will vary depending on our projects. Approximately 20 days of travelling abroad per year must be expected.

For additional information on the position, please contact Director, Allan Pedersen at +45 22 74 30 93.

 

Vestas Wind Systems A/SHammel2020-01-15T00:00:002020-01-29T00:00:00
330156274Quality EngineerRobot DK, Hammel Professional Full-Time ID: 6383 Are you an experienced Production Quality Engineer looking for a truly hands-on role where communication with key stakeholders is paramount to your success? If you have relevant production experience combined with strong hardware and production software and testing skills, we want to hear from you. Manufacturing Global Procurement Converters Controls Q Control Quality Control is part of Production Quality in the Vestas Hammel Factory, with responsibility for incoming Inspection, SQA (Supplier Quality Assurance) and Analysis of Customer claims. As Quality Engineer, you will ensure that products and processes comply with specifications and that the factory complies with international quality management system standards. Responsibilities Using your combined skills, you will ensure that the quality system and QDA system comply with requirements. As a strong communicator, you will influence any processes that affect quality within the factory, and facilitate and support quality improvements, while handling Non-Conformity cases. Analyse customer NCs and initiate corrective and preventive actions within a cross-functional group of PEX test and VPS Prioritise and track improvement initiatives with input from relevant departments Calculate the financial impact of local quality improvement initiatives with Factory Finance Controlling Lead project connected to Key Performance Indicators improvement (Customer NC PPM) and improvement projects to reduce internal Non-Conformity Reports (reduce Cost of Poor Quality) Guarantee that all the steps of the QIP have been correctly executed and share Q-KPI within the team Execute and facilitate local quality improvement projects with relevant departments according to project needs Ensure the value chain within the factory is balanced from Quality perspective Qualifications Strong career history as an Electronic Engineer Very good understanding of quality tools Skilled with product verification and validation Knowledge of Project Management LINUX and SAP experience an advantage Competencies Must be fluent in English, both written and spoken Customer-focused, analytical and result-oriented Ability to work independently Knowledge of Quality Systems, quality process, product quality and quality improvements What we offer A truly hands-on role within a global leader in renewable energy. Additional information This role is based in Hammel, Denmark. Up to 5 travel time will be expected. For further information on this role, please contact Bo Rio Styhm, Team Leader Quality Control on 4525625864.

DK, Hammel | Professional | Full-Time | ID: 6383 

Are you an experienced Production Quality Engineer looking for a truly hands-on role where communication with key stakeholders is paramount to your success? If you have relevant production experience combined with strong hardware and production software and testing skills, we want to hear from you.

Manufacturing & Global Procurement > Converters & Controls > Q Control
Quality Control is part of Production Quality in the Vestas Hammel Factory, with responsibility for incoming Inspection, SQA (Supplier Quality Assurance) and Analysis of Customer claims.

As Quality Engineer, you will ensure that products and processes comply with specifications and that the factory complies with international quality management system standards.

Responsibilities
Using your combined skills, you will ensure that the quality system and QDA system comply with requirements. As a strong communicator, you will influence any processes that affect quality within the factory, and facilitate and support quality improvements, while handling Non-Conformity cases.

  • Analyse customer NCs and initiate corrective and preventive actions within a cross-functional group of PEX test and VPS
  • Prioritise and track improvement initiatives with input from relevant departments
  • Calculate the financial impact of local quality improvement initiatives with Factory Finance & Controlling
  • Lead project connected to Key Performance Indicators improvement (Customer NC PPM) and improvement projects to reduce internal Non-Conformity Reports (reduce Cost of Poor Quality)
  • Guarantee that all the steps of the QIP have been correctly executed and share Q-KPI within the team
  • Execute and facilitate local quality improvement projects with relevant departments according to project needs
  • Ensure the value chain within the factory is balanced from Quality perspective

Qualifications

  • Strong career history as an Electronic Engineer
  • Very good understanding of quality tools
  • Skilled with product verification and validation
  • Knowledge of Project Management
  • LINUX and SAP experience an advantage

Competencies

  • Must be fluent in English, both written and spoken
  • Customer-focused, analytical and result-oriented
  • Ability to work independently
  • Knowledge of Quality Systems, quality process, product quality and quality improvements

What we offer
A truly hands-on role within a global leader in renewable energy.
 

Additional information
This role is based in Hammel, Denmark.

Up to 5% travel time will be expected.

For further information on this role, please contact Bo Rio Styhm, Team Leader Quality Control on +4525625864.

 

Vestas Wind Systems A/SHammel2020-01-13T00:00:002020-01-27T00:00:00
da-DK

Andre job der matcher din søgning

Electrical Engineering Manager for our offshore substation for offshore wind farms

Ørsted A/S

Fredericia
Would you like to take up the technical challenges related to offshore substation design and construction of offshore wind farms? Join us and become Electrical Engineering Manager in Substation Electrical Commissioning Management where you, along wi...
Indrykket:15. januar 2020

Senior Low Voltage Power Engineer for offshore substations

Ørsted A/S

Fredericia
Would you like to work for a world leader within renewable energy and take up the technical challenges regarding the design and construction of our offshore substations? Join us and become our new Senior Low Voltage Power Engineer in Substations Ele...
Indrykket:17. januar 2020

Teknisk rådgivning og kompetenceopbygning

LINAK A/S

Nordborg
Kunne du tænke dig en nøglerolle i et udfordrende job, hvor du kan udfolde dine tekniske kompetencer og dine personlige talenter? Kan du se dig selv i rollen som rådgiver og kompetenceudvikler, og har du evnen til at sætte dig ind i kunders behov? S...
Indrykket:12. december 2019

Electronics Engineer

Vestas Wind Systems A/S

Hammel
DK, Hammel Professional Full-Time ID: 6185 Do you want to accelerate your career within electronics testing and help save the world? We are looking for a person with an easy laugh and great energy, who waits to be one of the best within electronic t...
Indrykket:15. januar 2020

Quality Engineer

Vestas Wind Systems A/S

Hammel
DK, Hammel Professional Full-Time ID: 6383 Are you an experienced Production Quality Engineer looking for a truly hands-on role where communication with key stakeholders is paramount to your success? If you have relevant production experience combin...
Indrykket:13. januar 2020