Konstruktør med Siemens NX erfaring

Topteam har siden opstarten i 1999 leveret mekanisk konstruktion og projektledelse.
Vi er omkring 40 dedikerede og højt specialiserede medarbejdere, som brænder for at udvikle holdbare løsninger, til og i samarbejde med vores kunder. Vores medarbejdere indgår i kreative, udfordrende og innovative forløb hos kunden. Topteam har erfaring med konstruktion af produktionsudstyr til fødevarer, elektronik, metal, træ og medicinalindustrien. Dertil har vi også ekspertise indenfor svær industri, vind og transportudstyr.

I arbejdet, som Siemens NX konstruktør hos Topteam, kommer du til at arbejde hos et bredt udvalg af virksomheder spredt over hele Jylland. Kundernes forskelligartede opgaver præger din hverdag, og du har mulighed for, at udvikle dig gennem nye problemstillinger.

Din profil

Vi forventer, at du har en håndværksmæssig baggrund kombineret med en uddannelse som maskiningeniør, maskintekniker eller produktions teknolog med minimum 3 års erhvervserfaring inden for konstruktion. Du skal have erfaring med Siemens NX, være en hold spiller, samt have gode engelskkundskaber i både skrift og tale.

Hvad kan Topteam tilbyde

Vi kan tilbyde forskelligartede opgaver med periodisk tilknytning hos Topteams kunder. Højt kvalificerede kollegaer og sparringspartnere inden for konstruktion af maskiner og komponenter. Kompetenceudvikling, som matcher de kvalifikationer, som markedet og vores kunder efterspørger.
Her ud over tilbyder vi:

  • Faglig udvikling
  • Fleksibilitet
  • Socialt samvær
  • Madordning
  • Work-life-balance
  • Motionsordning

Og ikke mindst fastansættelse med konkurrencedygtig løn, pension og sundhedsforsikring

Hvem er Topteam

Topteam er et rådgivende ingeniørfirma og geografisk placeret, med hovedkontor i Skive og arbejdskontor i Hinnerup. En af vores styrker er vores evne til at samarbejde, og vi tror på, at de bedste resultater skabes herigennem. Vi er 100 procent dedikeret til vores projekter, og vi ser hvert projekt som en udfordring i, at levere kvalitet til tiden.

Kan du se dig selv i jobbet, så send os din ansøgning og CV. Vi indkalder løbende til samtale, så tøv ikke med at sende din ansøgning allerede i dag.

Start: Efter aftale

Spørgsmål til stillingen skal ske til Operations manager Jan Frydensberg Sørensen på tlf.: 23 35 03 30 eller via mail jfs@topteam.dk


Du har ikke vedlagt dokumenter til din ansøgning. Klik på 'OK' knappen nedenfor for at sende din ansøgning alligevel, eller klik på knappen "Annuller" og vedhæft dokumenter, før du sender din ansøgning igen.

Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330045144Phoenix-09371ee212019-06-20T00:00:00Konstruktør med Siemens NX erfaring

Topteam har siden opstarten i 1999 leveret mekanisk konstruktion og projektledelse.
Vi er omkring 40 dedikerede og højt specialiserede medarbejdere, som brænder for at udvikle holdbare løsninger, til og i samarbejde med vores kunder. Vores medarbejdere indgår i kreative, udfordrende og innovative forløb hos kunden. Topteam har erfaring med konstruktion af produktionsudstyr til fødevarer, elektronik, metal, træ og medicinalindustrien. Dertil har vi også ekspertise indenfor svær industri, vind og transportudstyr.

I arbejdet, som Siemens NX konstruktør hos Topteam, kommer du til at arbejde hos et bredt udvalg af virksomheder spredt over hele Jylland. Kundernes forskelligartede opgaver præger din hverdag, og du har mulighed for, at udvikle dig gennem nye problemstillinger.

Din profil

Vi forventer, at du har en håndværksmæssig baggrund kombineret med en uddannelse som maskiningeniør, maskintekniker eller produktions teknolog med minimum 3 års erhvervserfaring inden for konstruktion. Du skal have erfaring med Siemens NX, være en hold spiller, samt have gode engelskkundskaber i både skrift og tale.

Hvad kan Topteam tilbyde

Vi kan tilbyde forskelligartede opgaver med periodisk tilknytning hos Topteams kunder. Højt kvalificerede kollegaer og sparringspartnere inden for konstruktion af maskiner og komponenter. Kompetenceudvikling, som matcher de kvalifikationer, som markedet og vores kunder efterspørger.
Her ud over tilbyder vi:

  • Faglig udvikling
  • Fleksibilitet
  • Socialt samvær
  • Madordning
  • Work-life-balance
  • Motionsordning

Og ikke mindst fastansættelse med konkurrencedygtig løn, pension og sundhedsforsikring

Hvem er Topteam

Topteam er et rådgivende ingeniørfirma og geografisk placeret, med hovedkontor i Skive og arbejdskontor i Hinnerup. En af vores styrker er vores evne til at samarbejde, og vi tror på, at de bedste resultater skabes herigennem. Vi er 100 procent dedikeret til vores projekter, og vi ser hvert projekt som en udfordring i, at levere kvalitet til tiden.

Kan du se dig selv i jobbet, så send os din ansøgning og CV. Vi indkalder løbende til samtale, så tøv ikke med at sende din ansøgning allerede i dag.

Start: Efter aftale

Spørgsmål til stillingen skal ske til Operations manager Jan Frydensberg Sørensen på tlf.: 23 35 03 30 eller via mail jfs@topteam.dk

Topteam har siden opstarten i 1999 leveret mekanisk konstruktion og projektledelse. Vi er omkring 40 dedikerede og højt specialiserede medarbejdere, som brænder for at udvikle holdbare løsninger, til og i samarbejde med vores kunder. Vores medarbejdere indgår i kreative, udfordrende og innovative forløb hos kunden. Topteam har erfaring med konstruktion af produktionsudstyr til fødevarer, elektronik, metal, træ og medicinalindustrien. Dertil har vi også ekspertise indenfor svær industri, vind og transportudstyr. I arbejdet, som Siemens NX konstruktør hos Topteam, kommer du til at arbejde hos et bredt udvalg af virksomheder spredt over hele Jylland. Kundernes forskelligartede opgaver præger din hverdag, og du har mulighed for, at udvikle dig gennem nye problemstillinger. Din profil Vi forventer, at du har en håndværksmæssig baggrund kombineret med en uddannelse som maskiningeniør, maskintekniker eller produktions teknolog med minimum 3 års erhvervserfaring inden for konstruktion. Du skal have erfaring med Siemens NX, være en hold spiller, samt have gode engelskkundskaber i både skrift og tale. Hvad kan Topteam tilbyde Vi kan tilbyde forskelligartede opgaver med periodisk tilknytning hos Topteams kunder. Højt kvalificerede kollegaer og sparringspartnere inden for konstruktion af maskiner og komponenter. Kompetenceudvikling, som matcher de kvalifikationer, som markedet og vores kunder efterspørger. Her ud over tilbyder vi: Faglig udvikling Fleksibilitet Socialt samvær Madordning Work-life-balance Motionsordning Og ikke mindst fastansættelse med konkurrencedygtig løn, pension og sundhedsforsikring Hvem er Topteam Topteam er et rådgivende ingeniørfirma og geografisk placeret, med hovedkontor i Skive og arbejdskontor i Hinnerup. En af vores styrker er vores evne til at samarbejde, og vi tror på, at de bedste resultater skabes herigennem. Vi er 100 procent dedikeret til vores projekter, og vi ser hvert projekt som en udfordring i, at levere kvalitet til tiden. Kan du se dig selv i jobbet, så send os din ansøgning og CV. Vi indkalder løbende til samtale, så tøv ikke med at sende din ansøgning allerede i dag. Start: Efter aftale Spørgsmål til stillingen skal ske til Operations manager Jan Frydensberg Sørensen på tlf.: 23 35 03 30 eller via mail jfs@topteam.dk11jobnet09371ee2100000000000aDK_OFIR_02DKDanmark228DKK2019-08-17T00:00:000000http://topteam.dk/karriere/bliv-topteamer/?hr=show-job/52820EuropaDanmarkJyllandVestjyllandHolstebroEuropaDanmarkJyllandVestjyllandSkiveEuropaDanmarkJyllandMidtjyllandViborg3548928TOPTEAM11Øster Fælled Vej 67800SkiveDKDanmark0DKDanmarkDKDanmark8Fuldtid46Permanent779985JobNet5006497500649710018-06-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=09371ee2https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=09371ee2https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=09371ee2&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=09371ee2&page=EmailApplyForm&component=SendApplicationButton1Dansk3Læse/ tale214501Maskiningeniør20Ingeniør og naturvidenskab362106453noreply@ofir.comDKDanmarkDKDanmark330036615Lead Mechanical Engineer for medical device developmentRobot Phillips-Medisize A S continues to grow and right now, we are looking for an experienced Lead Mechanical Engineer for Global Innovation Development in Struer, Denmark. If you are interested in being part of project organization and passionate about creating unique products for people who need medical treatment it might be you, we are looking for. About the position You will lead the mechanical team within project teams and work in close collaboration with the Design Team Lead and the other team leads in the project. It is your responsibility to maintain a high level of quality in the mechanical work and documentation, at agreed deadlines. You make well-founded decisions about design solutions, components, parts and materials to en-sure safety and effectiveness of the mechanical design. A major part of your job as a Lead Mechanical Engineer is mentoring your team and deliver es-timations, documentation, planning and coordination to the project all based on Phillips Medisize s Mechanical Design Life-cycle Processes. What we are looking for in you Professional qualifications: Master or bachelor s degree in mechanical engineering. Several years of Mechanical engineering experience within a regulated device industry, medical industry is a plus. Leadership experience. Personal qualifications: You are an analytical and theoretical solid senior Mechanical engineer with leader skills. You are proactive, result oriented and a self-motivated team player with a holistic mindset. You are on hands with mechanical mechanisms, development and human centered design. You thrive by solving complex problems by using your own and your teams skills. It is essential that you understand the importance of maintaining a high level of quality and documentation. You have excellent written and verbal communication skills in English. We offer you A challenging position in an international innovative and successful company in growth. An opportunity to become part of a team of dedicated and highly qualified colleagues based in Struer, Denmark. Cooperation in cross-functional project teams with great opportunities to influence the daily work Participation in developing the Mechanical competence area ensuring Phillips-Medisize is up-to-date on relevant standards, best practices and tools. Well-structured training and continuous development of your competencies. Exciting career possibilities within the constantly growing area of medical devices. Flexible working hours. Salary on a competitive level. Are you curious to get more information? For more information and details on the position please contact Manager, Technology and Development Torben Laustsen on phone 45 6155 0530 We look forward to hearing from you. Application We processes applications continuously. Please submit your application and CV online soonest possible.

Phillips-Medisize A/S continues to grow and right now, we are looking for an experienced Lead Mechanical Engineer for Global Innovation Development in Struer, Denmark.
If you are interested in being part of project organization and passionate about creating unique products for people who need medical treatment it might be you, we are looking for.

About the position

You will lead the mechanical team within project teams and work in close collaboration with the Design Team Lead and the other team leads in the project. It is your responsibility to maintain a high level of quality in the mechanical work and documentation, at agreed deadlines. You make well-founded decisions about design solutions, components, parts and materials to en-sure safety and effectiveness of the mechanical design.
A major part of your job as a Lead Mechanical Engineer is mentoring your team and deliver es-timations, documentation, planning and coordination to the project; all based on Phillips Medisize’s Mechanical Design Life-cycle Processes.

What we are looking for in you

Professional qualifications: 

  • Master or bachelor’s degree in mechanical engineering.
  • Several years of Mechanical engineering experience within a regulated device industry, medical industry is a plus.
  • Leadership experience.

Personal qualifications: 
You are an analytical and theoretical solid senior Mechanical engineer with leader skills. You are proactive, result oriented and a self-motivated team player with a holistic mindset. You are on hands with mechanical mechanisms, development and human centered design.  You thrive by solving complex problems by using your own and your teams’ skills. It is essential that you understand the importance of maintaining a high level of quality and documentation. 
You have excellent written and verbal communication skills in English.

We offer you

  • A challenging position in an international innovative and successful company in growth.
  • An opportunity to become part of a team of dedicated and highly qualified colleagues based in Struer, Denmark.
  • Cooperation in cross-functional project teams with great opportunities to influence the daily work 
  • Participation in developing the Mechanical competence area ensuring Phillips-Medisize is          
    up-to-date on relevant standards, best practices and tools.
  • Well-structured training and continuous development of your competencies. 
  • Exciting career possibilities within the constantly growing area of medical devices.
  • Flexible working hours.
  • Salary on a competitive level.

Are you curious to get more information?

For more information and details on the position please contact Manager, Technology and Development Torben Laustsen on phone +45 6155 0530
We look forward to hearing from you.

Application

We processes applications continuously. Please submit your application and CV online soonest possible.

Phillips-Medisize A/SStruer2019-06-05T00:00:002019-07-29T00:00:00
330036614Injection Moulding DFM Engineer for medical device productionRobot Phillips-Medisize Global Innovation Development in Struer is expanding and setting up Manu-facturing Development and Clinical Build facilities. For this we are looking for an experienced IM Design For Manufacturing Engineer. If you thrive in a project organization creating unique medical devices it might be you, we are looking for. About the position The position is placed in the Technology and Development department and you work within the new established Manufacturing Development and Clinical Build team. You have a key role in a new team that will support the projects in Technology and Develop-ment on mouldability of plastic components in devices. You will participate in cross-functional project teams to develop and verify manufacturing processes and present development re-sults at technical reviews. You will be the expertise within injection moulding and responsible for completing Design for Manufacturing (DFM) and Design for Assembly (DFA) reviews of new product designs, determine process feasibility and development options. In collaboration with device development, production and external partners you will optimize plastic parts by analyzing the injection moulding process. You will give project engineers ad-vice on best practices within the design of injection moulds, choice of process parameters in injection moulding and how the component design and material choice will impact the mould-ing process and the part quality. You will also review process specifications and development plans with appropriate mold makers, contract manufacturers, prototyping services, equipment or other service suppliers. Furthermore, you will conduct FAT (Factory Authorized Test), IQ (Installation Qualification), OQ (Operational Qualification) and PQ (Process Qualification) for molds and or equipment and molding processes. Coordinate measurement and dimensional studies. Good documentation practice is essential and a high quality level is expected from you. What we are looking for in you Professional qualifications Master or bachelor s degree in Mechanical Engineering with emphasis on injection moulding, materials science and design of precision plastic parts. You must have several years of experience in simulation of the injection moulding pro-cess and in operating injection moulding machines. Knowledge about working in a cleanroom environment is an advantage. Personal qualifications You are an analytical and theoretical solid IM engineer. You are proactive, result oriented and a self-motivated team player with a holistic mindset. You have a keen interest in production technologies, automatization and robotics. It is essential that you understand the importance of maintaining a high level of quality and documentation. You have excellent written and verbal communication skills in English. We offer you A challenging position in an international innovative and successful company in growth. An opportunity to become part of a team of dedicated and highly qualified colleagues based in Struer, Denmark. Cooperation in cross-functional project teams with great opportunities to influence the daily work Participation in developing the IM competence area ensuring Phillips-Medisize is up-to-date on relevant standards, best practices and tools. Well-structured training and continuous development of your competencies. Exciting career possibilities within the constantly growing area of medical devices. Flexible working hours. Salary on a competitive level. Are you curious to get more information? For more information and details on the position please contact Manager, Technology and Development Torben Laustsen on phone 45 61 55 05 30 We look forward to hearing from you. Application We processes applications continuously. Please submit your application and CV online soonest possible.

Phillips-Medisize Global Innovation Development in Struer is expanding and setting up Manu-facturing Development and Clinical Build facilities. For this we are looking for an experienced IM Design For Manufacturing Engineer. If you thrive in a project organization creating unique medical devices it might be you, we are looking for.

About the position

The position is placed in the Technology and Development department and you work within the new established Manufacturing Development and Clinical Build team.

You have a key role in a new team that will support the projects in Technology and Develop-ment on mouldability of plastic components in devices. You will participate in cross-functional project teams to develop and verify manufacturing processes and present development re-sults at technical reviews. You will be the expertise within injection moulding and responsible for completing Design for Manufacturing (DFM) and Design for Assembly (DFA) reviews of new product designs, determine process feasibility and development options. 

In collaboration with device development, production and external partners you will optimize plastic parts by analyzing the injection moulding process. You will give project engineers ad-vice on best practices within the design of injection moulds, choice of process parameters in injection moulding and how the component design and material choice will impact the mould-ing process and the part quality. 

You will also review process specifications and development plans with appropriate mold makers, contract manufacturers, prototyping services, equipment or other service suppliers.
Furthermore, you will conduct FAT (Factory Authorized Test), IQ (Installation Qualification), OQ (Operational Qualification) and PQ (Process Qualification) for molds and/or equipment and molding processes. Coordinate measurement and dimensional studies. Good documentation practice is essential and a high quality level is expected from you.

What we are looking for in you

Professional qualifications 

  • Master or bachelor’s degree in Mechanical Engineering with emphasis on injection moulding, materials science and design of precision plastic parts.
  • You must have several years of experience in simulation of the injection moulding pro-cess and in operating injection moulding machines. Knowledge about working in a cleanroom environment is an advantage.

Personal qualifications

  • You are an analytical and theoretical solid IM engineer.
  • You are proactive, result oriented and a self-motivated team player with a holistic mindset.
  • You have a keen interest in production technologies, automatization and robotics.
  • It is essential that you understand the importance of maintaining a high level of quality and documentation. 
  • You have excellent written and verbal communication skills in English.

We offer you

  • A challenging position in an international innovative and successful company in growth.
  • An opportunity to become part of a team of dedicated and highly qualified colleagues based in Struer, Denmark.
  • Cooperation in cross-functional project teams with great opportunities to influence the daily work
  • Participation in developing the IM competence area ensuring Phillips-Medisize is up-to-date on relevant standards, best practices and tools.
  • Well-structured training and continuous development of your competencies.
  • Exciting career possibilities within the constantly growing area of medical devices.
  • Flexible working hours.
  • Salary on a competitive level.

Are you curious to get more information?

For more information and details on the position please contact Manager, Technology and Development Torben Laustsen on phone +45 61 55 05 30
We look forward to hearing from you.

Application

We processes applications continuously. Please submit your application and CV online soonest possible.

Phillips-Medisize A/SStruer2019-06-05T00:00:002019-07-29T00:00:00
330046911Virtual Development EngineerRobot What do we offer? Do you love working on virtual simulations and 3D design, within our digital journey? Would you like a job that gives you the best of both worlds? Based on theoretical data and virtual simulation, you will be able to see results quickly and play an important role in enhancing the performance of our innovative pumps, which make a difference to people around the world. Based in our Sub-Component-Hydraulics department, you will join 5 engineers and technicians who have a global responsibility within our core technologies: Innovation and exploitation of new technologies developing and managing the manufacturing base and core technologies and ensuring integration and improvements of products. You refer to Department Head Peter Thomsen Høgh. Our team work is based on feedback and helping each other. There will be one other colleague working in the same field as you, who will be ready to teach you everything you need to know to be successful in the job. Collaboration is also very important to us as we work not just within our team, but also across the whole organization globally, Peter explains. What is the job about? Rather than producing practical prototypes, we now want to carry out virtual simulations in Grundfos to find the right solution right away. New solution concepts can be tested and the functionality of these can be verified before purchasing and manufacturing of components. This allows us to carry out virtual testing loops and gives us more scope to test new ideas, and it can be done early in the project without major economic costs. You will be responsible for reducing lead-time by securing a robust design on new and existing production equipment. You do so using simulation and by developing processes in tool concepts and integration with periphery equipment, including welding principles. Your main tasks will therefore include: Cooperating across the organization to achieve the best results within time, cost, and quality, where you maintain an overview of the different processes, so that we can make the right decisions together. Applying simulations virtually, from the product simulation to equipment, and further to the production line machine. Working on the entire virtual production concept from 3D product to the final part assembly of components in our production area. Ensuring knowledge sharing in our organization through internal and external networks What do you need to apply? Most important to us is your interest within this specific area and your wish to work on both virtual simulations and 3D CAD construction. If you have experience these areas, that is a big plus. Moreover, we imagine that you: Are a Mechanical Engineer (Manufacturing Engineering) or hold an MSc. in Engineering in Technology Based Business Development or International Technology Management Have experience with finite element analysis, topology optimisation and robust design Have experience with 3D CAD modelling (We use Catia V5) - preferably within welding Have experience in simulation of production equipment in Catia and or LS-Dyna Speak and write English fluently. On a personal level, you are outgoing and thrive collaborating with colleagues. Also, you do not mind being a bit of a nerd when it comes to analysing simulation and welding of components to figure out which processes will bring us success. With your analytical mind-set, you have to stay updated on developments to know which components to produce and how, Peter finishes. Additional information If you have questions or want to know more about the position, please contact Department Head Peter Thomsen Høgh on 45 87 50 44 21. If this job sounds appealing to you, please send your resume and cover letter today and no later than 02 August 2019 by clicking on Apply . We expect interviews to be held on Week 28 2019. We look forward to hearing from you. If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com company 5195 or our YouTube channel: www.youtube.com watch?v zwY54t455CU

What do we offer?

Do you love working on virtual simulations and 3D design, within our digital journey? Would you like a job that gives you the best of both worlds? Based on theoretical data and virtual simulation, you will be able to see results quickly and play an important role in enhancing the performance of our innovative pumps, which make a difference to people around the world.

Based in our Sub-Component-Hydraulics department, you will join 5 engineers and technicians who have a global responsibility within our core technologies: Innovation and exploitation of new technologies; developing and managing the manufacturing base and core technologies; and ensuring integration and improvements of products. You refer to Department Head Peter Thomsen Høgh.

Our team work is based on feedback and helping each other. There will be one other colleague working in the same field as you, who will be ready to teach you everything you need to know to be successful in the job. Collaboration is also very important to us as we work not just within our team, but also across the whole organization globally,” Peter explains.

 

What is the job about?

Rather than producing practical prototypes, we now want to carry out virtual simulations in Grundfos – to find the right solution right away.  New solution concepts can be tested and the functionality of these can be verified before purchasing and manufacturing of components. This allows us to carry out virtual testing loops and gives us more scope to test new ideas, and it can be done early in the project without major economic costs.

You will be responsible for reducing lead-time by securing a robust design on new and existing production equipment. You do so using simulation and by developing processes in tool concepts and integration with periphery equipment, including welding principles.

Your main tasks will therefore include:

  • Cooperating across the organization to achieve the best results within time, cost, and quality, where you maintain an overview of the different processes, so that we can make the right decisions together.
  • Applying simulations virtually, from the product simulation to equipment, and further to the production line/machine.
  • Working on the entire virtual production concept from 3D product to the final part assembly of components in our production area.
  • Ensuring knowledge sharing in our organization through internal and external networks

 

What do you need to apply?

Most important to us is your interest within this specific area – and your wish to work on both virtual simulations and 3D CAD construction. If you have experience these areas, that is a big plus. Moreover, we imagine that you:

  • Are a Mechanical Engineer (Manufacturing Engineering) or hold an MSc. in Engineering in Technology Based Business Development or International Technology Management
  • Have experience with finite element analysis, topology optimisation and robust design
  • Have experience with 3D CAD modelling (We use Catia V5) - preferably within welding
  • Have experience in simulation of production equipment in Catia and/or LS-Dyna
  • Speak and write English fluently.

On a personal level, you are outgoing and thrive collaborating with colleagues. Also, you do not mind being a bit of a nerd when it comes to analysing simulation and welding of components to figure out which processes will bring us success. With your analytical mind-set, you have to stay updated on developments to know which components to produce and how,” Peter finishes.

 

Additional information
If you have questions or want to know more about the position, please contact Department Head Peter Thomsen Høgh on +45 87 50 44 21.

If this job sounds appealing to you, please send your resume and cover letter today and no later than 02 August 2019 by clicking on “Apply”. We expect interviews to be held on Week 28 2019.

We look forward to hearing from you.

If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com/company/5195 or our YouTube channel: www.youtube.com/watch?v=zwY54t455CU

GRUNDFOS HOLDING A/SBjerringbro2019-06-23T00:00:002019-08-15T00:00:00
330047662Senior Project Manager for medical device developmentRobot Phillips-Medisize A S continues to grow and right now, we are looking for an experienced project manager for Global Innovation Development EU in Struer, Denmark.If you are interested in being part of a project organization and passionate about creating unique products for people who need medical treatment it might be you, we are looking for. About the position: Phillips-Medisize A S is looking for an experienced Senior Project Manager who can lead projects and has focus on business and customer satisfaction. To manage the complex development projects your responsibilities as a senior project manager are: Leading the project by securing a continuous process, progress, maturity and quality with strong focus on agreed timeline and costs. Leading according to contractual agreements and project financials. Ensure mutual profitability of the project. Close communication and reporting with internal and external stakeholders. Ensure relevant project documentation in right quality at the right time. Facilitate and document project meetings. Act as a proactive team member in the development of project management tools, best practices and processes. What we are looking for in you: Personal qualifications: You have a strong leadership profile and are result oriented. You are not afraid to take lead in complex discussions or hands-on execution. At the same time, you are open for input from colleagues, have a team-oriented mentality and can get the best out of your team. From previous experience, you know how to uphold the required level of quality in a fast-paced environment. Being accustomed to complex situations and processes, you work and think independently and are self-motivated. You have a flexible approach and in critical situations you walk the extra mile and show the way. Professional qualifications: For this position the minimum required qualifications are Master or bachelor s degree in engineering or similar Proven track record of successful project management experience Strong leadership skills Understanding for the complexity of working in a highly regulated industry Strong experience in the industrialization phase of the project High degree of commercial understanding and the ability to transfer this to project execution Able to relay technical challenges to non-technical stakeholders Experienced in communicating and presentation on different organizational levels Good planning and estimation skills Experience with MS project and JIRA is an advantage Fluent in English spoken as well as written. We offer you A challenging position in an international innovative and successful company in growth. An opportunity to become part of a team of dedicated and highly qualified colleagues based in Struer, Denmark. Well-structured training and continuous development of your competencies. Exciting career possibilities within the constantly growing area of medical devices Flexible working hours. Salary on a competitive level. Are you curious to get more information? For more information and details on the position, please contact partner Jeppe Rimmen, Hansen Toft on 45 2499 8748. Application: We process applications continuously. Please submit your application and CV online soonest possible. The Company in short Phillips Medisize A S is an expert in the design, development and delivery of advanced drug de-livery devices and connected health solutions. Our customers are leading pharmaceutical com-panies worldwide.Phillips Medisize A S is a part of Molex. We offer innovative and integrated solutions supported by an end-to-end service offering from Strategy to Launch. Read more about Phillips Medisize A S at www.phillipsmedisize.com or follow us on LinkedIn.

Phillips-Medisize A/S continues to grow and right now, we are looking for an experienced project manager for Global Innovation Development EU in Struer, Denmark.If you are interested in being part of a project organization and passionate about creating unique products for people who need medical treatment it might be you, we are looking for.

About the position: 

Phillips-Medisize A/S is looking for an experienced Senior Project Manager who can lead projects and has focus on business and customer satisfaction.

To manage the complex development projects your responsibilities as a senior project manager are:

  • Leading the project by securing a continuous process, progress, maturity and quality with strong focus on agreed timeline and costs.
  • Leading according to contractual agreements and project financials.
  • Ensure mutual profitability of the project.
  • Close communication and reporting with internal and external stakeholders.
  • Ensure relevant project documentation in right quality at the right time.
  • Facilitate and document project meetings.
  • Act as a proactive team member in the development of project management tools, best practices and processes.

What we are looking for in you:  

Personal qualifications: 

You have a strong leadership profile and are result oriented. You are not afraid to take lead in complex discussions or hands-on execution. At the same time, you are open for input from colleagues, have a team-oriented mentality and can get the best out of your team. From previous experience, you know how to uphold the required level of quality in a fast-paced environment. Being accustomed to complex situations and processes, you work and think independently and are self-motivated. You have a flexible approach and in critical situations you walk the extra mile and show the way.

Professional qualifications:

For this position the minimum required qualifications are

  • Master or bachelor’s degree in engineering or similar
  • Proven track record of successful project management experience
  • Strong leadership skills
  • Understanding for the complexity of working in a highly regulated industry
  • Strong experience in the industrialization phase of the project
  • High degree of commercial understanding and the ability to transfer this to project execution
  • Able to relay technical challenges to non-technical stakeholders
  • Experienced in communicating and presentation on different organizational levels
  • Good planning and estimation skills
  • Experience with MS project and JIRA is an advantage
  • Fluent in English – spoken as well as written.

We offer you

  • A challenging position in an international innovative and successful company in growth.
  • An opportunity to become part of a team of dedicated and highly qualified colleagues based in Struer, Denmark.
  • Well-structured training and continuous development of your competencies. 
  • Exciting career possibilities within the constantly growing area of medical devices
  • Flexible working hours.
  • Salary on a competitive level.

Are you curious to get more information?

For more information and details on the position, please contact partner Jeppe Rimmen, Hansen Toft on +45 2499 8748. 

Application:

We process applications continuously. Please submit your application and CV online soonest possible.

The Company – in short

Phillips Medisize A/S is an expert in the design, development and delivery of advanced drug de-livery devices and connected health solutions.  Our customers are leading pharmaceutical com-panies worldwide.Phillips Medisize A/S is a part of Molex. We offer innovative and integrated solutions supported by an end-to-end service offering from Strategy to Launch. Read more about Phillips Medisize A/S at www.phillipsmedisize.com or follow us on LinkedIn.

Phillips-Medisize A/SStruer2019-06-25T00:00:002019-08-16T00:00:00
330051975Customer Support Engineer- Digital ServicesRobot Customer Support Engineers for newly established global support unit Are you ready to work with B2B support on digital services and help us develop it? Join us and take part in the strategic development of digital offerings and services a central, growing cornerstone in our business. Welcome to Grundfos a world of water management services and solutions At Grundfos, we develop water solutions for the world. This includes digital offerings such as advanced conditional monitoring and water and energy optimisation tools for larger facilities all to ensure that our customers get the most out of their pumps and systems. Digital offerings are cornerstones in the Grundfos strategy and will continue to grow in the future as we introduce more offerings within our 3 main segments: Building Service (heating, ventilation and air conditioning), Water Utility (water and wastewater) and Industry (industrial processes and utilities). Provide top-notch customer support and build future global support set-ups Joining our newly established Monitor Support team, you will dedicate yourself to either of the 3 segments, providing support to the customers that subscribe to our digital offerings. Furthermore, you will play a pivotal role in developing and consolidating our support set-up. This includes defining and implementing processes, tools, systems, scripts, training procedures and more with a global perspective. The service area has been through a fantastic growth since we initiated a massive transformation 3 years ago. Now we are taking it to a new level by introducing a broad range of digital offerings to our customers. You and your colleagues will play a key role in setting up the global framework for monitoring and support on these offerings, says Senior Manager of Monitor Support Torben Hadberg. Specifically, you will: Provide direct, global support to customers and ensure that any problems are solved and services restored Participate in the onboarding of new customers to ensure efficient support from day 1 Monitor customer installations and provide advice on optimisation of their equipment and installations Drive the continuous development of a scalable model for monitoring and support, providing transparency on cost, time and customer insights Onboard colleagues once the setup is deployed Work together with third party suppliers when their services are integrated into Grundfos offerings to ensure effective collaboration around monitoring and support Help onboard new digital offerings so customers are well supported Ideally, you will be based in our office in Bjerringbro, and you will travel approximately 4-5 weeks per year to participate in further deployment of the monitoring and support set-up. Customer-oriented candidate with a commercial understanding This is an opportunity for great professional development as you partake in a significant service transformation and play an important role in building the future set-up. It is therefore vital that you are motivated to put your experience into play and at the same time be open to growing your knowledge and skills. Furthermore, we are looking for a profound desire to provide the best customer support, and we imagine that you: Have experience with direct customer contact, possibly through previous positions as a technical sales representative, service technician, mechanical engineer or the like Have a technical education within software, engineering or similar Possess knowledge within some of the application areas of our 3 segments, e.g. heating, ventilation, air conditioning, clean or wastewater distribution or industrial processes and utilities knowledge of hydraulics, pumps and pump applications as well as protocols, controls and automation is a great plus Speak and write fluent English Additional information If you have questions or want to know more about the position, please contact Senior Manager of Monitor Support Torben Hadberg on 45 2142 0301. If this job sounds appealing to you, please send your resume and cover letter today and no later than August 8th 2019 by clicking on Apply . We expect interviews to be held during week 33. We look forward to hearing from you. If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com company 5195 or our YouTube channel: https: www.youtube.com watch?v zwY54t455CU.

Customer Support Engineers for newly established global support unit 

Are you ready to work with B2B support on digital services and help us develop it? Join us and take part in the strategic development of digital offerings and services – a central, growing cornerstone in our business.

Welcome to Grundfos – a world of water management services and solutions

At Grundfos, we develop water solutions for the world. This includes digital offerings such as advanced conditional monitoring and water and energy optimisation tools for larger facilities – all to ensure that our customers get the most out of their pumps and systems.

Digital offerings are cornerstones in the Grundfos strategy and will continue to grow in the future as we introduce more offerings within our 3 main segments: Building Service (heating, ventilation and air conditioning), Water Utility (water and wastewater) and Industry (industrial processes and utilities).

 

Provide top-notch customer support and build future global support set-ups

Joining our newly established Monitor & Support team, you will dedicate yourself to either of the 3 segments, providing support to the customers that subscribe to our digital offerings.

Furthermore, you will play a pivotal role in developing and consolidating our support set-up. This includes defining and implementing processes, tools, systems, scripts, training procedures and more with a global perspective.

“The service area has been through a fantastic growth since we initiated a massive transformation 3 years ago. Now we are taking it to a new level by introducing a broad range of digital offerings to our customers. You and your colleagues will play a key role in setting up the global framework for monitoring and support on these offerings,” says Senior Manager of Monitor & Support Torben Hadberg.

Specifically, you will:

  • Provide direct, global support to customers and ensure that any problems are solved and services restored
  • Participate in the onboarding of new customers to ensure efficient support from day 1
  • Monitor customer installations and provide advice on optimisation of their equipment and installations
  • Drive the continuous development of a scalable model for monitoring and support, providing transparency on cost, time and customer insights
  • Onboard colleagues once the setup is deployed
  • Work together with third party suppliers when their services are integrated into Grundfos offerings to ensure effective collaboration around monitoring and support
  • Help onboard new digital offerings so customers are well supported

Ideally, you will be based in our office in Bjerringbro, and you will travel approximately 4-5 weeks per year to participate in further deployment of the monitoring and support set-up.

 

Customer-oriented candidate with a commercial understanding

This is an opportunity for great professional development as you partake in a significant service transformation and play an important role in building the future set-up. It is therefore vital that you are motivated to put your experience into play and at the same time be open to growing your knowledge and skills.

Furthermore, we are looking for a profound desire to provide the best customer support, and we imagine that you:

  • Have experience with direct customer contact, possibly through previous positions as a technical sales representative, service technician, mechanical engineer or the like
  • Have a technical education within software, engineering or similar
  • Possess knowledge within some of the application areas of our 3 segments, e.g. heating, ventilation, air conditioning, clean or wastewater distribution or industrial processes and utilities – knowledge of hydraulics, pumps and pump applications as well as protocols, controls and automation is a great plus
  • Speak and write fluent English

 

Additional information

If you have questions or want to know more about the position, please contact Senior Manager of Monitor & Support Torben Hadberg on +45 2142 0301.

If this job sounds appealing to you, please send your resume and cover letter today and no later than August 8th 2019 by clicking on “Apply”. We expect interviews to be held during week 33.

 

We look forward to hearing from you.

If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com/company/5195 or our YouTube channel: https://www.youtube.com/watch?v=zwY54t455CU.

GRUNDFOS HOLDING A/SBjerringbro2019-07-01T00:00:002019-08-01T00:00:00
da-DK

Andre job der matcher din søgning

Lead Mechanical Engineer for medical device development

Phillips-Medisize A/S

Struer
Phillips-Medisize A S continues to grow and right now, we are looking for an experienced Lead Mechanical Engineer for Global Innovation Development in Struer, Denmark. If you are interested in being part of project organization and passionate about ...
Indrykket:5. juni 2019
Udløbsdato:29. juli 2019

Injection Moulding DFM Engineer for medical device production

Phillips-Medisize A/S

Struer
Phillips-Medisize Global Innovation Development in Struer is expanding and setting up Manu-facturing Development and Clinical Build facilities. For this we are looking for an experienced IM Design For Manufacturing Engineer. If you thrive in a proje...
Indrykket:5. juni 2019
Udløbsdato:29. juli 2019

Virtual Development Engineer

GRUNDFOS HOLDING A/S

Bjerringbro
What do we offer? Do you love working on virtual simulations and 3D design, within our digital journey? Would you like a job that gives you the best of both worlds? Based on theoretical data and virtual simulation, you will be able to see results qu...
Indrykket:23. juni 2019
Udløbsdato:15. august 2019

Senior Project Manager for medical device development

Phillips-Medisize A/S

Struer
Phillips-Medisize A S continues to grow and right now, we are looking for an experienced project manager for Global Innovation Development EU in Struer, Denmark.If you are interested in being part of a project organization and passionate about creat...
Indrykket:25. juni 2019
Udløbsdato:16. august 2019

Customer Support Engineer- Digital Services

GRUNDFOS HOLDING A/S

Bjerringbro
Customer Support Engineers for newly established global support unit Are you ready to work with B2B support on digital services and help us develop it? Join us and take part in the strategic development of digital offerings and services a central, g...
Indrykket:1. juli 2019
Udløbsdato:1. august 2019