KONSTRUKTØR/INGENIØR

Om stillingen:

For vores kunde BIGADAN A/S søger Medarbejderne ApS - en konstruktør/Ingeniør til BIGADANS designafdeling, hvor du som engageret medspiller i virksomheden, vil blive en del af virksomhedens fortsatte vækst inden for levering af biogasanlæg i Danmark og rundt i verden.

Jobbeskrivelse:

Stillingen referer til BIGADANS projektchef. Stillingen kræver, der tages ejerskab på egne opgaver, men også der bidrages til, et godt flow i løsning af opgaverne i teamet. Du er ikke bange for at tage hånd om tingene og gå forrest, for at nå fælles i mål.

Dine overordnede opgaver er udarbejdelse af tegninger og dokumentationsmateriale.

Opgaver:

  • Konstruktionsarbejde herunder udarbejdelse af 3D modeller
  • Trække/udarbejde tekniske tegninger på baggrund af 3D modeller
  • Servicering af BIGADANS projekter med tegninger og beskrivelser
  • Vedligeholde modulære løsningsmodeller
  • 3D visualiseringsopgaver i forbindelse med salg og projektudvikling

Ønskeligt har du erfaring med rørsystemer, opstilling af tanke, gasrør, spildevand, men det er ikke et MUST.

Din profil:

Du forventes at være uddannet som ingeniør (maskinretning), produktions teknolog (konstruktionsretning) eller lignende.

Det forventes, at du har flere års erhvervserfaring og en solid praktisk erfaring med at tegne i programmet Autodesk Inventor.

Herudover forventes godt kendskab til Autodesk Vault, der er materialebiblioteket.

Da meget af BIGADANS aktiviteter foregår i udlandet skal du kunne kommunikere på engelsk.

Din personlige profil:

-Du er selvtænkende og åben for sparring både opad og nedad

-Du kan modtage konstruktiv kritisk og er åben for andres argumenter og meninger

-Du er struktureret, omhyggelig og systematisk.

-Du trives i et uformelt miljø med mange opgaver, i en flad organisation, hvor

kommandovejen er kort.

-Du er en god med- og modspiller, der tager ejerskab på dine opgaver, men samtidig

har en god forståelse for, at når der løftes i flok, kommer man samlet i mål.

-Du nikker samtidig genkendende til ord som ansvarsfuld, gensidig respekt og

disciplin.

-Du udviser et socialt arrangement og viser overskud

-Du er 100% ærlig overfor dine kolleger, chef og ikke mindst dig selv.

Virksomheden tilbyder:

Et spændende job i en af de fagligt stærkeste biogasvirksomheder på markedet. BIGADAN har opbygget en stor kompetence og et solidt produktprogram gennem mere end 30 års virke indenfor branchen. Stillingen bliver med base på BIGADANS domicil i Skanderborg, der ligger smukt i landskabet og med ganske kort vej til E45.

Virksomhedens mål er, at BIGADAN fremover fortsat er markedsledende indenfor udvikling af nye produkter, markeder og indtjening. BIGADAN er en ejer ledet virksomhed og har et solidt økonomisk fundament for de mange opgaver virksomheden står overfor i fremtiden.

Ansøgning og tiltrædelse

Ønsker du at komme i betragtning til denne stilling, så send hurtigst muligt din ansøgning via ansøgningsknappen herunder.

Stillingen ønskes besat hurtigst muligt, hvorfor vi løbende afholder samtaler.

Har du spørgsmål, er du velkommen til at kontakte Chefkonsulent Kirsten Henriksen på tlf.: 20 90 28 37 eller mail: khe@medarbejderne.dk

Du kan læse mere om Medarbejderne ApS på vores hjemmeside www.medarbejderne.dk


Du har ikke vedlagt dokumenter til din ansøgning. Klik på 'OK' knappen nedenfor for at sende din ansøgning alligevel, eller klik på knappen "Annuller" og vedhæft dokumenter, før du sender din ansøgning igen.

Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

329943689Phoenix-b91dd48512019-01-16T00:00:00KONSTRUKTØR/INGENIØR

Om stillingen:

For vores kunde BIGADAN A/S søger Medarbejderne ApS - en konstruktør/Ingeniør til BIGADANS designafdeling, hvor du som engageret medspiller i virksomheden, vil blive en del af virksomhedens fortsatte vækst inden for levering af biogasanlæg i Danmark og rundt i verden.

Jobbeskrivelse:

Stillingen referer til BIGADANS projektchef. Stillingen kræver, der tages ejerskab på egne opgaver, men også der bidrages til, et godt flow i løsning af opgaverne i teamet. Du er ikke bange for at tage hånd om tingene og gå forrest, for at nå fælles i mål.

Dine overordnede opgaver er udarbejdelse af tegninger og dokumentationsmateriale.

Opgaver:

  • Konstruktionsarbejde herunder udarbejdelse af 3D modeller
  • Trække/udarbejde tekniske tegninger på baggrund af 3D modeller
  • Servicering af BIGADANS projekter med tegninger og beskrivelser
  • Vedligeholde modulære løsningsmodeller
  • 3D visualiseringsopgaver i forbindelse med salg og projektudvikling

Ønskeligt har du erfaring med rørsystemer, opstilling af tanke, gasrør, spildevand, men det er ikke et MUST.

Din profil:

Du forventes at være uddannet som ingeniør (maskinretning), produktions teknolog (konstruktionsretning) eller lignende.

Det forventes, at du har flere års erhvervserfaring og en solid praktisk erfaring med at tegne i programmet Autodesk Inventor.

Herudover forventes godt kendskab til Autodesk Vault, der er materialebiblioteket.

Da meget af BIGADANS aktiviteter foregår i udlandet skal du kunne kommunikere på engelsk.

Din personlige profil:

-Du er selvtænkende og åben for sparring både opad og nedad

-Du kan modtage konstruktiv kritisk og er åben for andres argumenter og meninger

-Du er struktureret, omhyggelig og systematisk.

-Du trives i et uformelt miljø med mange opgaver, i en flad organisation, hvor

kommandovejen er kort.

-Du er en god med- og modspiller, der tager ejerskab på dine opgaver, men samtidig

har en god forståelse for, at når der løftes i flok, kommer man samlet i mål.

-Du nikker samtidig genkendende til ord som ansvarsfuld, gensidig respekt og

disciplin.

-Du udviser et socialt arrangement og viser overskud

-Du er 100% ærlig overfor dine kolleger, chef og ikke mindst dig selv.

Virksomheden tilbyder:

Et spændende job i en af de fagligt stærkeste biogasvirksomheder på markedet. BIGADAN har opbygget en stor kompetence og et solidt produktprogram gennem mere end 30 års virke indenfor branchen. Stillingen bliver med base på BIGADANS domicil i Skanderborg, der ligger smukt i landskabet og med ganske kort vej til E45.

Virksomhedens mål er, at BIGADAN fremover fortsat er markedsledende indenfor udvikling af nye produkter, markeder og indtjening. BIGADAN er en ejer ledet virksomhed og har et solidt økonomisk fundament for de mange opgaver virksomheden står overfor i fremtiden.

Ansøgning og tiltrædelse

Ønsker du at komme i betragtning til denne stilling, så send hurtigst muligt din ansøgning via ansøgningsknappen herunder.

Stillingen ønskes besat hurtigst muligt, hvorfor vi løbende afholder samtaler.

Har du spørgsmål, er du velkommen til at kontakte Chefkonsulent Kirsten Henriksen på tlf.: 20 90 28 37 eller mail: khe@medarbejderne.dk

Du kan læse mere om Medarbejderne ApS på vores hjemmeside www.medarbejderne.dk

Om stillingen: For vores kunde BIGADAN A S søger Medarbejderne ApS - en konstruktør Ingeniør til BIGADANS designafdeling, hvor du som engageret medspiller i virksomheden, vil blive en del af virksomhedens fortsatte vækst inden for levering af biogasanlæg i Danmark og rundt i verden. Jobbeskrivelse: Stillingen referer til BIGADANS projektchef. Stillingen kræver, der tages ejerskab på egne opgaver, men også der bidrages til, et godt flow i løsning af opgaverne i teamet. Du er ikke bange for at tage hånd om tingene og gå forrest, for at nå fælles i mål. Dine overordnede opgaver er udarbejdelse af tegninger og dokumentationsmateriale. Opgaver: Konstruktionsarbejde herunder udarbejdelse af 3D modeller Trække udarbejde tekniske tegninger på baggrund af 3D modeller Servicering af BIGADANS projekter med tegninger og beskrivelser Vedligeholde modulære løsningsmodeller 3D visualiseringsopgaver i forbindelse med salg og projektudvikling Ønskeligt har du erfaring med rørsystemer, opstilling af tanke, gasrør, spildevand, men det er ikke et MUST. Din profil: Du forventes at være uddannet som ingeniør (maskinretning), produktions teknolog (konstruktionsretning) eller lignende. Det forventes, at du har flere års erhvervserfaring og en solid praktisk erfaring med at tegne i programmet Autodesk Inventor. Herudover forventes godt kendskab til Autodesk Vault, der er materialebiblioteket. Da meget af BIGADANS aktiviteter foregår i udlandet skal du kunne kommunikere på engelsk. Din personlige profil: -Du er selvtænkende og åben for sparring både opad og nedad -Du kan modtage konstruktiv kritisk og er åben for andres argumenter og meninger -Du er struktureret, omhyggelig og systematisk. -Du trives i et uformelt miljø med mange opgaver, i en flad organisation, hvor kommandovejen er kort. -Du er en god med- og modspiller, der tager ejerskab på dine opgaver, men samtidig har en god forståelse for, at når der løftes i flok, kommer man samlet i mål. -Du nikker samtidig genkendende til ord som ansvarsfuld, gensidig respekt og disciplin. -Du udviser et socialt arrangement og viser overskud -Du er 100 ærlig overfor dine kolleger, chef og ikke mindst dig selv. Virksomheden tilbyder: Et spændende job i en af de fagligt stærkeste biogasvirksomheder på markedet. BIGADAN har opbygget en stor kompetence og et solidt produktprogram gennem mere end 30 års virke indenfor branchen. Stillingen bliver med base på BIGADANS domicil i Skanderborg, der ligger smukt i landskabet og med ganske kort vej til E45. Virksomhedens mål er, at BIGADAN fremover fortsat er markedsledende indenfor udvikling af nye produkter, markeder og indtjening. BIGADAN er en ejer ledet virksomhed og har et solidt økonomisk fundament for de mange opgaver virksomheden står overfor i fremtiden. Ansøgning og tiltrædelse Ønsker du at komme i betragtning til denne stilling, så send hurtigst muligt din ansøgning via ansøgningsknappen herunder. Stillingen ønskes besat hurtigst muligt, hvorfor vi løbende afholder samtaler. Har du spørgsmål, er du velkommen til at kontakte Chefkonsulent Kirsten Henriksen på tlf.: 20 90 28 37 eller mail: khe@medarbejderne.dk Du kan læse mere om Medarbejderne ApS på vores hjemmeside www.medarbejderne.dk11Jobnetb91dd485100000000000aDK_OFIR_02DKDanmark228DKK2019-02-16T00:00:000000http://medarbejderne.dk/for-jobsogere/faste-stillinger?hr=show-job/389940EuropaDanmarkJyllandØstjyllandOdder3436935Medarbejderne ApS11Vroldvej 1688660SkanderborgDKDanmark0
khe@medarbejderne.dkDKDanmarkDKDanmark
8Fuldtid46Permanent695198JobNet493168649316861000https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=b91dd485https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=b91dd485https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=b91dd485&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=b91dd485&page=EmailApplyForm&component=SendApplicationButtonhttps://static.matchwork.com/company/logo/DK/ORS/SoMe/IT_Ingenioer_og_energi/Ingenioer_og_naturvidenskab/4.jpgEr du logisk tænkende? Hos Medarbejderne ApS søger vi en medarbejder, der er interesseret i at løse spændende opgaver. 12008001Dansk3Læse/ tale214501Maskiningeniør20Ingeniør og naturvidenskab360148076Kirstenkhe@medarbejderne.dkDKDanmarkDKDanmark329955106Vores tekniske afdeling har en ledig plads - er det dig, som skal have den?Robot Vi har travlt hos Tekfa og søger derfor en maskiningeniør eller lignende med sans for projektledelse og udvikling. Som ingeniør i vores konstruktionsafdeling bliver dit overordnede arbejde at balancerer mellem standarder og nyt, hvor du formår både at forny og standardiserer en eksisterende løsning til brug for fremtidige projekter. Vi er en ingeniørvirksomhed, der producerer veje- og doseringsløsninger til en lang række industrier. Tekfas styrke ligger i håndtering af pulvere og granulater, hvor vi bevæger os mellem produktion af standard units og udvikling af nye kundespecifikke løsninger. Det vil også gøre sig gældende for dit arbejde. Når produktionen startes på smedeværkstedet, er du hovedansvarlig på gennemførelsen af dine projekter. Derudover sørger du for indhentning af tilbud, indkøb af komponenter og at foretage eventuelle FAT og SAT tests. Dit arbejde vil derfor bestå af: Deltagelse i projekter fra første kundemøde til sidste afleveringsforretning efter montage. Afklaring af kundens krav behov, materialer, driftsforhold, mekanik herunder vejning og pulverforhold Test, dataorganisering og integration med ERP-system Modularisering og standardisering af vores løsninger Erfaring, viden og interesse indenfor disse områder, vil være noget som vi forventer i større eller mindre grad. Hertil kommer en del sekundære fagligheder, som vi vil være et stort plus for dig at have en eller flere af: købmandsskab, kendskab til den rustfri industri, vejning, elektronik, PI-diagram og forståelse for produktionsprocesser og dertilhørende styringsforhold gerne indenfor levnedsmiddelindustrien. Vi er en lille uformel organisation med ca. 15 fuldtidsansatte, hvor alle afdelinger arbejder sammen på kryds og tværs. Indsigt, respekt og interesse for de øvrige faggrupper, nysgerrighed og samarbejdsevne er af stor vigtighed for succes i jobbet. Du kan være ung fremadstormende eller ældre og erfaren. Det vigtigste er, at du er dygtig til dit fag, og at du vil trives i dit arbejdsområde. Med tiden vil opgaver og udfordringer variere, og derfor kan du forvente løbende muligheder for at gå i forskellige retninger. Tekfa tilbyder Fleksible arbejdstider i tidsrummet 07:00-17:00 37 timer uge og løn efter kvalifikationer Et job tæt på både produktion, handel og kunder. Send din ansøgning, CV og evt. bilag til job@tekfa.dk. Vi afholder samtaler løbende. Når den rette kandidat er fundet, bliver opslaget fjernet. Har du spørgsmål til jobbet, er du velkommen til at kontakte Teknisk Chef Karsten Kristiansen på telefon 87 54 53 23. Du kan læse mere om os på http: www.tekfa.dk.

Vi har travlt hos Tekfa og søger derfor en maskiningeniør eller lignende med sans for projektledelse og udvikling. Som ingeniør i vores konstruktionsafdeling bliver dit overordnede arbejde at balancerer mellem standarder og nyt, hvor du formår både at forny og standardiserer en eksisterende løsning til brug for fremtidige projekter.

Vi er en ingeniørvirksomhed, der producerer veje- og doseringsløsninger til en lang række industrier. Tekfas styrke ligger i håndtering af pulvere og granulater, hvor vi bevæger os mellem produktion af standard units og udvikling af nye kundespecifikke løsninger. Det vil også gøre sig gældende for dit arbejde. Når produktionen startes på smedeværkstedet, er du hovedansvarlig på gennemførelsen af dine projekter. Derudover sørger du for indhentning af tilbud, indkøb af komponenter og at foretage eventuelle FAT og SAT tests. Dit arbejde vil derfor bestå af:

  • Deltagelse i projekter fra første kundemøde til sidste afleveringsforretning efter montage.
  • Afklaring af kundens krav/behov, materialer, driftsforhold, mekanik – herunder vejning og pulverforhold
  • Test, dataorganisering og integration med ERP-system
  • Modularisering og standardisering af vores løsninger

Erfaring, viden og interesse indenfor disse områder, vil være noget som vi forventer i større eller mindre grad. Hertil kommer en del sekundære fagligheder, som vi vil være et stort plus for dig at have en eller flere af: købmandsskab, kendskab til den rustfri industri, vejning, elektronik, PI-diagram og forståelse for produktionsprocesser og dertilhørende styringsforhold – gerne indenfor levnedsmiddelindustrien.

Vi er en lille uformel organisation med ca. 15 fuldtidsansatte, hvor alle afdelinger arbejder sammen på kryds og tværs. Indsigt, respekt og interesse for de øvrige faggrupper, nysgerrighed og samarbejdsevne er af stor vigtighed for succes i jobbet.

Du kan være ung fremadstormende eller ældre og erfaren. Det vigtigste er, at du er dygtig til dit fag, og at du vil trives i dit arbejdsområde. Med tiden vil opgaver og udfordringer variere, og derfor kan du forvente løbende muligheder for at gå i forskellige retninger.

Tekfa tilbyder

  • Fleksible arbejdstider i tidsrummet 07:00-17:00
  • 37 timer/uge og løn efter kvalifikationer
  • Et job tæt på både produktion, handel og kunder.

Send din ansøgning, CV og evt. bilag til job@tekfa.dk. Vi afholder samtaler løbende. Når den rette kandidat er fundet, bliver opslaget fjernet. Har du spørgsmål til jobbet, er du velkommen til at kontakte Teknisk Chef Karsten Kristiansen på telefon 87 54 53 23. Du kan læse mere om os på http://www.tekfa.dk.

TEKFA A/SGalten2019-02-05T00:00:002019-04-02T00:00:00
329955071NPI Lead AssemblyRobot DK, Aarhus N Senior Management Full-Time ID: 1701 For the next generation of turbines Vestas are looking for an experienced NPI lead for New Product Introduction R D and Manufacturing activities. So, if you are holding a relevant engineering degree preferably in Mechanical or Production Engineering combined with several years of experience in project management within product development, you might be the one we are looking for. Industrialisation New Product Introduction Process, Technology NPI Towers The New Product Introduction (NPI) department focuses on early product development until implementation into factories, supporting all platforms under development. The NPI lead is responsible for delivery of NPI Milestone Plan and detailed project plan of the scope to secure the documentation package for production. Furthermore, the NPI lead must ensure usage of DF(x) planned activities to secure the overall risk picture up against the 0-series, starting from the concept phase and ensure that the product reaches the Technical Review s on agreed time and quality by supporting the risk mitigations. You will join an organisation with several experienced NPI leads where we share knowledge across areas and prepare improvements to increase synergy between projects. You will become active in the project, but also in the organisation to improve and further mature the way they execute. They expect to learn from you, just as you can expect to learn from them! Responsibilities It will be your responsibility to: drive the dialogue with NPI management to clarify competence need and time estimates based on scope description drive the execution according to NPI project plans communicate status within project team, Manufacturing and NPI Management ensure build of design and process prototype ensure an effective and transparent OSOS system at factory, running from the first build in production ensure the creation and maintenance of a usable and tested PWI package incl. PII s ensure usage of DF(x) planned activities in the NPI projects communicate the overall risk picture towards the platform, NPI and assembly management conduct review of milestones facilitate readiness level evaluations be a FIRM gatekeeper at Peer Reviews and Technical Reviews Qualifications Relevant engineering degree preferably in Mechanical or Production Engineering combined with several years of experience of project management, preferable within product development You have documented experience with project management of complex projects with multiple stakeholders and suppliers You have insight in and the ability to work along the entire value chain Minimum 5-8 years experience in related position Firm knowledge in assembly processes and factory setups Competencies You have some manufacturing and assembly skills, insights experiences, and the ability to define concepts and implement these in close collaboration with the business. Personal competences: You have documented experience with technical project management of complex projects with multiple stakeholders and suppliers You have insight in and the ability to work along the entire value chain You have a structured approach to your assignments and are able to handle project changes occurring in a dynamic R D environment You take pride in delivering the project as agreed, on cost, quality, time and in a safe manner. You possess strong communication and English skills, both orally and in writing You possess high analytical skills and a structural way of working Your approach to task solving is both technically sound and commercially viable You are outgoing and proactive, and you possess the ability to work both independently and in teams Professional competences: Process flow development: You need to understand the flow and setup of the facility, and to define all your deliveries through a process flow. This is an important delivery. General P-Engineering Knowledge: Agile manufacturing, Lean Production. Design for assembly: Ability to understand criticality in assembly steps, able to see issues with assembly at an early design phase where design is still on paper. Design for manufacturing: Be able to take a component and simplify it. What we offer We offer an exciting and challenging job with excellent opportunities for professional and personal development in an inspiring environment at the world s leading wind turbine producer. We value collaboration, simplicity and accountability together with enthusiasm and the right balance between creativity and quality in all solutions. Additional information Work location for this position will be Aarhus, Denmark. Travel to be expected, approx. 30-40 days per year. For additional information on the position, please contact: Director, Process, Tech. NPI Towers, Karsten Roar Sørensen at 45 2256 7499

DK, Aarhus N | Senior Management | Full-Time | ID: 1701 

For the next generation of turbines Vestas are looking for an experienced NPI lead for New Product Introduction R&D and Manufacturing activities. 

So, if you are holding a relevant engineering degree preferably in Mechanical or Production Engineering combined with several years of experience in project management within product development, you might be the one we are looking for. 

Industrialisation > New Product Introduction > Process, Technology & NPI Towers   
The New Product Introduction (NPI) department focuses on early product development until implementation into factories, supporting all platforms under development. 

The NPI lead is responsible for delivery of NPI Milestone Plan and detailed project plan of the scope to secure the documentation package for production. Furthermore, the NPI lead must ensure usage of DF(x) planned activities to secure the overall risk picture up against the 0-series, starting from the concept phase and ensure that the product reaches the Technical Review’s on agreed time and quality by supporting the risk mitigations.

You will join an organisation with several experienced NPI leads where we share knowledge across areas and prepare improvements to increase synergy between projects. You will become active in the project, but also in the organisation to improve and further mature the way they execute. They expect to learn from you, just as you can expect to learn from them!

Responsibilities
It will be your responsibility to:

  • drive the dialogue with NPI management to clarify competence need and time estimates based on scope description
  • drive the execution according to NPI project plans 
  • communicate status within project team, Manufacturing and NPI Management 
  • ensure build of design and process prototype
  • ensure an effective and transparent OSOS system at factory, running from the first build in production
  • ensure the creation and maintenance of a usable and tested PWI package incl. PII’s
  • ensure usage of DF(x) planned activities in the NPI projects
  • communicate the overall risk picture towards the platform, NPI and assembly management
  • conduct review of milestones
  • facilitate readiness level evaluations
  • be a FIRM gatekeeper at Peer Reviews and Technical Reviews 

Qualifications

  • Relevant engineering degree – preferably in Mechanical or Production Engineering combined with several years of experience of project management, preferable within product development 
  • You have documented experience with project management of complex projects with multiple stakeholders and suppliers 
  • You have insight in and the ability to work along the entire value chain
  • Minimum 5-8 years’ experience in related position
  • Firm knowledge in assembly processes and factory setups

Competencies

You have some manufacturing and assembly skills, insights/experiences, and the ability to define concepts and implement these in close collaboration with the business.

Personal competences: 

  • You have documented experience with technical project management of complex projects with multiple stakeholders and suppliers
  • You have insight in and the ability to work along the entire value chain 
  • You have a structured approach to your assignments and are able to handle project changes occurring in a dynamic R&D environment
  • You take pride in delivering the project as agreed, on cost, quality, time and in a safe manner.
  • You possess strong communication and English skills, both orally and in writing
  • You possess high analytical skills and a structural way of working
  • Your approach to task solving is both technically sound and commercially viable
  • You are outgoing and proactive, and you possess the ability to work both independently and in teams

Professional competences:  

  • Process flow development: You need to understand the flow and setup of the facility, and to define all your deliveries through a process flow. This is an important delivery.
  • General P-Engineering Knowledge: Agile manufacturing, Lean Production.
  • Design for assembly: Ability to understand criticality in assembly steps, able to see issues with assembly at an early design phase where design is still on paper.
  • Design for manufacturing: Be able to take a component and simplify it.

What we offer

We offer an exciting and challenging job with excellent opportunities for professional and personal development in an inspiring environment at the world’s leading wind turbine producer. We value collaboration, simplicity and accountability together with enthusiasm and the right balance between creativity and quality in all solutions.

Additional information
Work location for this position will be Aarhus, Denmark. 

Travel to be expected, approx. 30-40 days per year.

For additional information on the position, please contact: Director, Process, Tech. & NPI Towers, Karsten Roar Sørensen at +45 2256 7499

 

Vestas Wind System A/SAarhus N2019-02-05T00:00:002019-02-19T00:00:00
329950870R&D IngeniørRobot Vil du være med til at udvikle fremtidens energiteknologi til køle- og varmepumpeindustrien? Hos Johnson Controls søger vi en R D Ingeniør til at arbejde med kompressorteknologi til køleindustrien. Johnson Controls er en global organisation med mere end 120.000 medarbejdere og vi udvikler, producerer og markedsfører komplette køleanlæg og varmepumper til industrielle og maritime formål. Hvad du vil lave Kompressorer er hjertet i industrielle køleanlæg og varmepumper. Som R D Ingeniør hos os bliver du en del af et kompetent team, som er specialiseret i den fortsatte udvikling af kompressorteknologi. Du vil arbejde med beregninger, dimensionering samt design af kompressorer. Vi er et stærkt team hvor faglighed, udvikling og samarbejde går hånd i hånd. Vi lægger vægt på et uformelt miljø, med højt humør og god kommunikation. Vi ved, at innovation og dynamik skabes af medarbejderne, og derfor giver vi dem mulighed for personlig og faglig udvikling, således at de kan honorere de høje krav, vi stiller til dem. Du vil få mulighed for faglig fordybelse, indflydelse og for at se teorien realiseret i fysiske produkter. Hvordan du vil gøre det I rollen som R D Ingeniør vil dine primære opgaver være: Deltage i konceptarbejdet med idegenerering, analyse, designforslag og løsningsvalg. Deltage i projektarbejde omkring udvikling af kompressorer og tilhørende hjælpeudstyr. Forberede tests i vores forsøgscenter, herunder forsøgsspecifikationer og evaluering af testresultater. Deltage i troubleshooting sammen med vores erfarne kollegaer i serviceafdelingen. Yde support til salg, service og andre interne såvel som eksterne kunder. Være daglig sparringspartner for dine kollegaer i teamet. Dokumentere produktet i form af beregningsværktøjer og styringsalgoritmer. Hvem vi leder efter Vi forestiller os, at du er uddannet Ingeniør - gerne Civilingeniør eller tilsvarende. Vi foretrækker, at du har mindst 3 års erfaring, men vi er også åbne for nyuddannede. Det er vigtigt, at du er teoretisk velfunderet i termodynamik, vibrationsanalyse og andre mekaniske discipliner. Hvis du har erfaring med projektering af proces- eller køleanlæg er det kun et plus. Som person er du ansvarsbevidst og en konstruktiv holdspiller, som ser løsninger frem for forhindringer. Du besidder gode kommunikative evner både på dansk og engelsk og du har en effektiv, struktureret og rolig tilgang til opgaveløsningen uden at tabe fokus når deadlines skal overholdes i en travl hverdag. Ansøgning Lyder dette som dig? Så send os din ansøgning via vores hjemmeside. Ansøgningerne behandles i takt med, at vi modtager dem. Tiltrædelse sker efter aftale. Hvis du ønsker at høre mere om stillingen er du velkommen til at kontakte Manager for Compressor Engineering Erhardt Nielsen på 29 22 77 20 eller sende en e-mail til erhardt.nielsen@jci.com.

Vil du være med til at udvikle fremtidens energiteknologi til køle- og varmepumpeindustrien? 

Hos Johnson Controls søger vi en R&D Ingeniør til at arbejde med kompressorteknologi til køleindustrien. Johnson Controls er en global organisation med mere end 120.000 medarbejdere og vi udvikler, producerer og markedsfører komplette køleanlæg og varmepumper til industrielle og maritime formål. 

Hvad du vil lave 

Kompressorer er hjertet i industrielle køleanlæg og varmepumper. Som R&D Ingeniør hos os bliver du en del af et kompetent team, som er specialiseret i den fortsatte udvikling af kompressorteknologi. Du vil arbejde med beregninger, dimensionering samt design af kompressorer. 

Vi er et stærkt team hvor faglighed, udvikling og samarbejde går hånd i hånd. Vi lægger vægt på et uformelt miljø, med højt humør og god kommunikation. Vi ved, at innovation og dynamik skabes af medarbejderne, og derfor giver vi dem mulighed for personlig og faglig udvikling, således at de kan honorere de høje krav, vi stiller til dem. Du vil få mulighed for faglig fordybelse, indflydelse og for at se teorien realiseret i fysiske produkter. 

Hvordan du vil gøre det 

I rollen som R&D Ingeniør vil dine primære opgaver være: 

  • Deltage i konceptarbejdet med idegenerering, analyse, designforslag og løsningsvalg.
  • Deltage i projektarbejde omkring udvikling af kompressorer og tilhørende hjælpeudstyr.
  • Forberede tests i vores forsøgscenter, herunder forsøgsspecifikationer og evaluering af testresultater.
  • Deltage i troubleshooting sammen med vores erfarne kollegaer i serviceafdelingen.
  • Yde support til salg, service og andre interne såvel som eksterne kunder.
  • Være daglig sparringspartner for dine kollegaer i teamet.
  • Dokumentere produktet i form af beregningsværktøjer og styringsalgoritmer. 

Hvem vi leder efter 

Vi forestiller os, at du er uddannet Ingeniør - gerne Civilingeniør eller tilsvarende. Vi foretrækker, at du har mindst 3 års erfaring, men vi er også åbne for nyuddannede. Det er vigtigt, at du er teoretisk velfunderet i termodynamik, vibrationsanalyse og andre mekaniske discipliner. Hvis du har erfaring med projektering af proces- eller køleanlæg er det kun et plus. 

Som person er du ansvarsbevidst og en konstruktiv holdspiller, som ser løsninger frem for forhindringer. Du besidder gode kommunikative evner – både på dansk og engelsk – og du har en effektiv, struktureret og rolig tilgang til opgaveløsningen uden at tabe fokus når deadlines skal overholdes i en travl hverdag. 

Ansøgning 

Lyder dette som dig? Så send os din ansøgning via vores hjemmeside. Ansøgningerne behandles i takt med, at vi modtager dem. Tiltrædelse sker efter aftale. 

Hvis du ønsker at høre mere om stillingen er du velkommen til at kontakte Manager for Compressor Engineering Erhardt Nielsen på 29 22 77 20 eller sende en e-mail til erhardt.nielsen@jci.com.

JOHNSON CONTROLS DENMARK ApSHøjbjerg2019-01-29T00:00:002019-02-28T00:00:00
329950018Mechanical EngineerRobot We are currently looking for a talented Mechanical Engineer to join our team in Trige. You will become part of our engineering team and you will join a team consisting of 12 employees. In total, we are approximately 50 dedicated employees in R D. In our team, we develop equipment and machines for Poultry Plants first processing. This is where fully automated machinery and systems stun, slaughter, bleed, tenderize, scald and remove feathers, heads and feet from consumable poultry for further processing. The sub-sequent team is the Evisceration team who is in charge of removing and processing the intestines of the poultry. The job You will be responsible for the project management, design, and development and testing of mechanical components and equipment. In addition, your responsibilities will include: Generating complete machine assembly drawings and detailed components Performing engineering design calculations and participate in product design decisions Creating and maintaining design documentation Analyzing existing products and investigate improvements Releasing approved products into production Providing technical guidance to drafters to develop detailed drawings Participating in design projects including new product development, customized products, existing product maintenance, quality improvement, and cost reduction Working with Project Sales Manufacturing by answering questions and resolving issues Coordinating and monitoring project activities Providing technical support to all internal departments, suppliers and customers Working closely with mechanical, electrical, and software engineers Professional qualifications You hold a Bachelor s degree in e.g. mechanical engineering or something similar. We will also emphasize the following qualifications Experience with a 3D 2D design tool is required (preferably SolidWorks) Knowledge in MS Office, CAD, PLM Systems (preferably SAP) Design knowledge of machined and fabricated parts Design knowledge and experience with conveyors, actuators, gear-motors, pumps etc. Experience within the food industry is an advantage Personal qualifications Demonstrable analytical skills and hands-on attitude Ability to work under pressure and challenging conditions High degree of personal planning and able to meet deadlines Creativity and team working skills Possess strong communication skills in English, orally and in writing (the Group language is English) Travelling can be expected in the range up to 30-50 per year (usually less) in connection with tests, error detection and inspiration. We offer An exciting and challenging position with independent responsibilities and great room for bringing forward solutions to the team. We offer pension scheme, health insurance, opportunity of flexible working hours, an attractive canteen, massage, well-working staff and art associations, and last, but not least, you will get some dedicated and able colleagues. Further information If you have any questions, please do not hesitate to contact Technical Manager, Per Thorup at 45 2260 1309. Recruitment and application We handle applications as we receive them and close the recruitment as soon as we have the right profile. If you are interested in the position, we therefore encourage you to send your application as soon as possible. You can apply through Jobindex. About the company: LINCO Food Systems A S is part of the BAADER Group, one of the global leaders of producers of process equipment for the poultry and fish industry with more than 1000 employees all over the world. LINCO Food Systems A S based in Trige, near Aarhus, is the main centre of the BAADER Group in relation to the poultry industry. The company develops, produces and sells machines and complete plants and has a global market share of 95-99 . The company employs approx. 500 people at two sites in Denmark, one in Holland and one in USA and is represented all over the world with local sales offices, distributors and agents.

We are currently looking for a talented Mechanical Engineer to join our team in Trige.

You will become part of our engineering team and you will join a team consisting of 12 employees. In total, we are approximately 50 dedicated employees in R&D. In our team, we develop equipment and machines for Poultry Plants first processing. This is where fully automated machinery and systems stun, slaughter, bleed, tenderize, scald and remove feathers, heads and feet from consumable poultry for further processing. The sub-sequent team is the Evisceration team who is in charge of removing and processing the intestines of the poultry.

The job

  • You will be responsible for the project management, design, and development and testing of mechanical components and equipment. In addition, your responsibilities will include:
    Generating complete machine assembly drawings and detailed components
  • Performing engineering design calculations and participate in product design decisions
  • Creating and maintaining design documentation
  • Analyzing existing products and investigate improvements
  • Releasing approved products into production
  • Providing technical guidance to drafters to develop detailed drawings
  • Participating in design projects including new product development, customized products, existing product maintenance, quality improvement, and cost reduction
  • Working with Project/Sales/Manufacturing by answering questions and resolving issues
  • Coordinating and monitoring project activities
  • Providing technical support to all internal departments, suppliers and customers
  • Working closely with mechanical, electrical, and software engineers

Professional qualifications

You hold a Bachelor’s degree in e.g. mechanical engineering or something similar. We will also emphasize the following qualifications

  • Experience with a 3D/2D design tool is required (preferably SolidWorks)
  • Knowledge in MS Office, CAD, PLM Systems (preferably SAP)
  • Design knowledge of machined and fabricated parts
  • Design knowledge and experience with conveyors, actuators, gear-motors, pumps etc.
  • Experience within the food industry is an advantage

Personal qualifications

  • Demonstrable analytical skills and “hands-on” attitude
  • Ability to work under pressure and challenging conditions
  • High degree of personal planning and able to meet deadlines
  • Creativity and team working skills
  • Possess strong communication skills in English, orally and in writing (the Group language is English)

Travelling can be expected in the range up to 30-50 per year (usually less) in connection with tests, error detection and inspiration.

We offer

An exciting and challenging position with independent responsibilities and great room for bringing forward solutions to the team. We offer pension scheme, health insurance, opportunity of flexible working hours, an attractive canteen, massage, well-working staff and art associations, and last, but not least, you will get some dedicated and able colleagues.

Further information

If you have any questions, please do not hesitate to contact Technical Manager, Per Thorup at +45 2260 1309.

Recruitment and application

We handle applications as we receive them and close the recruitment as soon as we have the right profile. If you are interested in the position, we therefore encourage you to send your application as soon as possible. You can apply through Jobindex.


About the company:

LINCO Food Systems A/S is part of the BAADER Group, one of the global leaders of producers of process equipment for the poultry and fish industry with more than 1000 employees all over the world.

LINCO Food Systems A/S based in Trige, near Aarhus, is the main centre of the BAADER Group in relation to the poultry industry. The company develops, produces and sells machines and complete plants and has a global market share of 95-99 %. The company employs approx. 500 people at two sites in Denmark, one in Holland and one in USA and is represented all over the world with local sales offices, distributors and agents.

LINCO FOOD SYSTEMS A/STrige2019-01-29T00:00:002019-03-25T00:00:00
329946832Deputy Installation ManagerRobot Use your leadership and technical skills and help us build a greener future Do you have experience with construction projects and a desire to work offshore? Would you consider becoming part of an environmentally friendly company, more specifically, would you like to become a part of the Installation Management team in MHI Vestas Offshore Wind, constructing wind farms with the most powerful wind turbine in the world? The position requires 180 - travel days globally per year on a fixed rotation. You will be working side by side with the Installation Manager in the planning, execution and closure phases of the project. MHI Vestas wants to do better every day With 2500 employees in seven different countries, we are one of the leading players in the offshore wind industry. Even if we find ourselves in many different locations, one thing remains the same: We prioritise the team spirit and we value the close connection between our employees. We focus on financially viable and sustainable solutions that benefit future generations. Established in 2014, we are a young, diverse and ambitious organisation with an informal and dynamic environment. Tasks responsibilities: You will... ...be responsible for managing the daily operation on the offshore installation vessel and navigate amongst several stakeholders to ensure safe, high-quality and timely execution. A work day on an installation vessel is highly affected by uncontrollable factors, which make for a very versatile work load and a changing environment. Within this frame , the Deputy Installation Manager is expected to take responsibility for the following (though not exhaustive) list of areas of responsibility: Support the Installation Manager and Project Team in the planning, execution and closure phases of a project Support the management of interfaces between MHI Vestas, the customer and the installation vessel owner in terms of vessel layouts, lifting plans, power requirements, method statements, risk assessments and related work instructions Take part in the day-to-day communication and alignment with the client, vessel owner and relevant sub-contracted companies Liaise with project coordinators for daily marine planning, incl. crew transfers and crew change Support the adequate training of installation personnel Ensure installation personnel welfare Proactively resolve internal and external cross-functional issues to ensure the project is not affected Installation execution according to QHSE standards Skills experience: Our new colleague... ...is an excellent people manager with good technical skills and know-how. You hold a degree in Marine Engineering or similar, and you have 3 years of experience in the wind industry or a related industry where you have worked with the installation of wind turbines in an environment where QHSE plays a significant role. The position calls for a personal who can build strong relationships with stakeholders, and who can motivate a team in a calm and determined way, while still respecting the individual colleague. In the role, you will often be presented to issues and challenges to solve, and it is therefore very important that you possess a result-oriented mindset and are a problem solver. We expect that you: Have experience with stakeholder management Understand the importance of adhering to internal processes and procedures Are loyal, focused and can take full responsibility of your own area. Have leadership experience within large-scale projects (advantage, not required) Have good IT skills (MS Office, ERP systems and coordination systems) Are fluent in English Join us if you... ...would like to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional. In Operations, we offer you: Great colleagues that support each other and work together Excellent opportunities for professional and personal development The right balance between creativity and quality in all solutions. We value initiative and responsibility Apply now We re already looking forward to hearing from you. In case you have questions about the position, please contact Head of Installation Management, Jesper Fyhn Friis, on 45 2555 0286. This position requires approx. 180 travel days per year to our various offshore sites. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially. Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with 2500 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan and Japan.

Use your leadership and technical skills and help us build a greener future

Do you have experience with construction projects and a desire to work offshore? Would you consider becoming part of an environmentally friendly company, more specifically, would you like to become a part of the Installation Management team in MHI Vestas Offshore Wind, constructing wind farms with the most powerful wind turbine in the world?

The position requires 180 +/- travel days globally per year on a fixed rotation. You will be working side by side with the Installation Manager in the planning, execution and closure phases of the project.

MHI Vestas wants to do better every day

With +2500 employees in seven different countries, we are one of the leading players in the offshore wind industry. Even if we find ourselves in many different locations, one thing remains the same: We prioritise the team spirit and we value the close connection between our employees. We focus on financially viable and sustainable solutions that benefit future generations. Established in 2014, we are a young, diverse and ambitious organisation with an informal and dynamic environment.

Tasks & responsibilities: You will...

...be responsible for managing the daily operation on the offshore installation vessel and navigate amongst several stakeholders to ensure safe, high-quality and timely execution. A work day on an installation vessel is highly affected by uncontrollable factors, which make for a very versatile work load and a changing environment. Within this "frame", the Deputy Installation Manager is expected to take responsibility for the following (though not exhaustive) list of areas of responsibility:

  • Support the Installation Manager and Project Team in the planning, execution and closure phases of a project
  • Support the management of interfaces between MHI Vestas, the customer and the installation vessel owner in terms of vessel layouts, lifting plans, power requirements, method statements, risk assessments and related work instructions
  • Take part in the day-to-day communication and alignment with the client, vessel owner and relevant sub-contracted companies
  • Liaise with project coordinators for daily marine planning, incl. crew transfers and crew change
  • Support the adequate training of installation personnel
  • Ensure installation personnel welfare
  • Proactively resolve internal and external cross-functional issues to ensure the project is not affected
  • Installation execution according to QHSE standards

Skills & experience: Our new colleague...

...is an excellent people manager with good technical skills and know-how. You hold a degree in Marine Engineering or similar, and you have 3+ years of experience in the wind industry or a related industry where you have worked with the installation of wind turbines in an environment where QHSE plays a significant role. The position calls for a personal who can build strong relationships with stakeholders, and who can motivate a team in a calm and determined way, while still respecting the individual colleague. In the role, you will often be presented to issues and challenges to solve, and it is therefore very important that you possess a result-oriented mindset and are a problem solver.

We expect that you:

  • Have experience with stakeholder management
  • Understand the importance of adhering to internal processes and procedures
  • Are loyal, focused and can take full responsibility of your own area.
  • Have leadership experience within large-scale projects (advantage, not required)
  • Have good IT skills (MS Office, ERP systems and coordination systems)
  • Are fluent in English

Join us if you...

...would like to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional.

In Operations, we offer you:

  • Great colleagues that support each other and work together
  • Excellent opportunities for professional and personal development
  • The right balance between creativity and quality in all solutions. We value initiative and responsibility

Apply now

We're already looking forward to hearing from you. In case you have questions about the position, please contact Head of Installation Management, Jesper Fyhn Friis, on +45 2555 0286. This position requires approx. 180 travel days per year to our various offshore sites. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially.

Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A/S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with +2500 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan and Japan.

 

MHI VESTAS OFFSHORE WIND A/SAarhus N2019-01-22T00:00:002019-03-19T00:00:00
da-DK

Andre job der matcher din søgning

Vores tekniske afdeling har en ledig plads - er det dig, som skal have den?

TEKFA A/S

Galten
Vi har travlt hos Tekfa og søger derfor en maskiningeniør eller lignende med sans for projektledelse og udvikling. Som ingeniør i vores konstruktionsafdeling bliver dit overordnede arbejde at balancerer mellem standarder og nyt, hvor du formår både ...
Indrykket:5. februar 2019
Udløbsdato:2. april 2019

NPI Lead Assembly

Vestas Wind System A/S

Aarhus N
DK, Aarhus N Senior Management Full-Time ID: 1701 For the next generation of turbines Vestas are looking for an experienced NPI lead for New Product Introduction R D and Manufacturing activities. So, if you are holding a relevant engineering degree ...
Indrykket:5. februar 2019
Udløbsdato:19. februar 2019

R&D Ingeniør

JOHNSON CONTROLS DENMARK ApS

Højbjerg
Vil du være med til at udvikle fremtidens energiteknologi til køle- og varmepumpeindustrien? Hos Johnson Controls søger vi en R D Ingeniør til at arbejde med kompressorteknologi til køleindustrien. Johnson Controls er en global organisation med mere...
Indrykket:29. januar 2019
Udløbsdato:28. februar 2019

Mechanical Engineer

LINCO FOOD SYSTEMS A/S

Trige
We are currently looking for a talented Mechanical Engineer to join our team in Trige. You will become part of our engineering team and you will join a team consisting of 12 employees. In total, we are approximately 50 dedicated employees in R D. In...
Indrykket:29. januar 2019
Udløbsdato:25. marts 2019

Deputy Installation Manager

MHI VESTAS OFFSHORE WIND A/S

Aarhus N
Use your leadership and technical skills and help us build a greener future Do you have experience with construction projects and a desire to work offshore? Would you consider becoming part of an environmentally friendly company, more specifically, ...
Indrykket:22. januar 2019
Udløbsdato:19. marts 2019