Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

Maskiningeniør med erfaring med udarbejdelser af PFD & PID

Maskiningeniør med erfaring med uarbejdelser af PFD og PID og brænder du for selvstændighed i jobbet samt vidensdeling og sparring med dine arbejdskollegaer?

Maskiningeniør med erfaring med udarbejdelser af PFD og PID
Brænder du for selvstændighed i jobbet samt vidensdeling og sparring med dine arbejdskollegaer? Så skal du søge denne stilling som vil være i Nordjylland. Aalborg afdelingen har 10 faglig dygtige medarbejdere.

Af væsentligste arbejds- og ansvarsopgaver kan nævnes:

  • Udarbejdelse af massebalancer, PFD, PID og 3D Layout
  • Konstruktionsberegning af procesanlæg, maskiner og udstyr
  • Udvælge egnet procesteknologi og udarbejdelse af detaljeret procesdesign
  • Dimensionering af procesanlæg & -udstyr
  • Deltagelse og planlægning af møder med kunder og respektive leverandører
  • Deltagelse i idriftsættelse af procesanlæg hos kunden
  • Rådgivende ingeniørarbejde udført for / og hos kunder
  • Inspektion (FAT og SAT) hos kunder og leverandører
  • Indsamle / udarbejde og validere anlægs- / udstyrsdokumentation


Jobbeskrivelse:
Opgaverne er meget varierende og kan strække sig fra opgaver af få timers varighed, til længerevarende projekterings- og konsulentopgaver. Arbejdsstedet vil derfor afhænge af den enkelte opgave og ofte være en kombination af arbejde på kontoret og hos kunderne. Der er tale om en meget selvstændig og spændende stilling, hvor der bliver rig mulighed for at arbejde med mange forskellige problemstillinger som udvælges og tilpasses efter dine kvalifikationer.

Kvalifikationer og erfaring: 

  • Du er uddannet som maskiningeniør som gerne må være suppleret med en uddannelse som svejseingeniør og med nogle års erfaring inden for olie- og gas- eller bioindustrien med en grundig og systematisk analytisk indfaldsvinkel til opgaver.
  • Kendskab til tekniske branchestandarder vil være en fordel.
  • Behersker IT som dit arbejdsredskab (MS Office, MS Project, AutoCAD 2D/3D, Inventor og evt. Solid Works).
  • Som person er du selvkørende, trives med at arbejde med mange forskelligartede opgaver.
  • Du er en imødekommende type og har nemt ved at omgås andre mennesker.
  • Fleksibilitet og solidt drive med en resultatorienteret og innovativ arbejdsform.
  • Evnen og lysten til at blive udstationeret ved kunder i kortere eller længere perioder.
  • Systematisk og med gode evner til at skabe og bevare overblik, også i pressede situationer.

Sprog: 

  • Behersker dansk og engelsk i skrift og tale.


Vi tilbyder: En spændende stilling med mange kontakter og tæt samarbejde med en del mennesker på alle niveauer. Vores kunder spænder fra små og mellemstore virksomheder til store internationale selskaber med produktionsenheder i ind- og udlandet. Et aktivt, nærværende og uformelt miljø, med reel mulighed for at være med til at præge udviklingen fremover. Imødekommende og smilende arbejdskollegaer der kan sparre på et højt fagligt niveau. For alle vores medarbejdere er der stor mulighed for at se resultatet af egne initiativer og indsatser, samt gode personlige og faglige udviklingsmuligheder.

Vi har en ambitiøs vækststrategi, som du bliver en del af. Det betyder, at du med den høje kvalitet i dit arbejde er med til at sikre, at vi har tilfredse kunder, der vender tilbage. Du kombinerer derfor din egen ekspertise med dine kollegaers gennem sparring og videndeling over telefon, mail og på kontoret. Vi prioriterer løbende kontakt med dine kollegaer højt – også for at sikre, at du trives. Samtidig vil vi være en attraktiv arbejdsplads, hvor der er balance mellem arbejde og privatliv. Møder på tværs af afdelinger og årlig teambuilding, sommerfest med familien m.m. er faste ting i kalenderen

Ønsker du yderligere informationer, er du velkommen til at kontakte:
Afdelingsleder, Hans Langhoff Nielsen: mobil 2611 9887

Process Engineering A/S

LinkedIn

 

 

Sådan ansøger du

Har du lyst til at blive vores nye kollega, så send din ansøgning vedlagt relevante data, mrk. ref. maskiningeniør Aalborg, til HR-afdelingen: Dorte Mohr Carstensen: dmc@proeng.dk.

Alle henvendelser behandles fortroligt og der afholdes løbende jobsamtaler.


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330051226Phoenix-a53db79b12019-06-30T00:00:00Maskiningeniør med erfaring med udarbejdelser af PFD & PID

Maskiningeniør med erfaring med uarbejdelser af PFD og PID og brænder du for selvstændighed i jobbet samt vidensdeling og sparring med dine arbejdskollegaer?

Maskiningeniør med erfaring med udarbejdelser af PFD og PID
Brænder du for selvstændighed i jobbet samt vidensdeling og sparring med dine arbejdskollegaer? Så skal du søge denne stilling som vil være i Nordjylland. Aalborg afdelingen har 10 faglig dygtige medarbejdere.

Af væsentligste arbejds- og ansvarsopgaver kan nævnes:

  • Udarbejdelse af massebalancer, PFD, PID og 3D Layout
  • Konstruktionsberegning af procesanlæg, maskiner og udstyr
  • Udvælge egnet procesteknologi og udarbejdelse af detaljeret procesdesign
  • Dimensionering af procesanlæg & -udstyr
  • Deltagelse og planlægning af møder med kunder og respektive leverandører
  • Deltagelse i idriftsættelse af procesanlæg hos kunden
  • Rådgivende ingeniørarbejde udført for / og hos kunder
  • Inspektion (FAT og SAT) hos kunder og leverandører
  • Indsamle / udarbejde og validere anlægs- / udstyrsdokumentation


Jobbeskrivelse:
Opgaverne er meget varierende og kan strække sig fra opgaver af få timers varighed, til længerevarende projekterings- og konsulentopgaver. Arbejdsstedet vil derfor afhænge af den enkelte opgave og ofte være en kombination af arbejde på kontoret og hos kunderne. Der er tale om en meget selvstændig og spændende stilling, hvor der bliver rig mulighed for at arbejde med mange forskellige problemstillinger som udvælges og tilpasses efter dine kvalifikationer.

Kvalifikationer og erfaring: 

  • Du er uddannet som maskiningeniør som gerne må være suppleret med en uddannelse som svejseingeniør og med nogle års erfaring inden for olie- og gas- eller bioindustrien med en grundig og systematisk analytisk indfaldsvinkel til opgaver.
  • Kendskab til tekniske branchestandarder vil være en fordel.
  • Behersker IT som dit arbejdsredskab (MS Office, MS Project, AutoCAD 2D/3D, Inventor og evt. Solid Works).
  • Som person er du selvkørende, trives med at arbejde med mange forskelligartede opgaver.
  • Du er en imødekommende type og har nemt ved at omgås andre mennesker.
  • Fleksibilitet og solidt drive med en resultatorienteret og innovativ arbejdsform.
  • Evnen og lysten til at blive udstationeret ved kunder i kortere eller længere perioder.
  • Systematisk og med gode evner til at skabe og bevare overblik, også i pressede situationer.

Sprog: 

  • Behersker dansk og engelsk i skrift og tale.


Vi tilbyder: En spændende stilling med mange kontakter og tæt samarbejde med en del mennesker på alle niveauer. Vores kunder spænder fra små og mellemstore virksomheder til store internationale selskaber med produktionsenheder i ind- og udlandet. Et aktivt, nærværende og uformelt miljø, med reel mulighed for at være med til at præge udviklingen fremover. Imødekommende og smilende arbejdskollegaer der kan sparre på et højt fagligt niveau. For alle vores medarbejdere er der stor mulighed for at se resultatet af egne initiativer og indsatser, samt gode personlige og faglige udviklingsmuligheder.

Vi har en ambitiøs vækststrategi, som du bliver en del af. Det betyder, at du med den høje kvalitet i dit arbejde er med til at sikre, at vi har tilfredse kunder, der vender tilbage. Du kombinerer derfor din egen ekspertise med dine kollegaers gennem sparring og videndeling over telefon, mail og på kontoret. Vi prioriterer løbende kontakt med dine kollegaer højt – også for at sikre, at du trives. Samtidig vil vi være en attraktiv arbejdsplads, hvor der er balance mellem arbejde og privatliv. Møder på tværs af afdelinger og årlig teambuilding, sommerfest med familien m.m. er faste ting i kalenderen

Ønsker du yderligere informationer, er du velkommen til at kontakte:
Afdelingsleder, Hans Langhoff Nielsen: mobil 2611 9887

Process Engineering A/S

LinkedIn

 

 

Sådan ansøger du

Har du lyst til at blive vores nye kollega, så send din ansøgning vedlagt relevante data, mrk. ref. maskiningeniør Aalborg, til HR-afdelingen: Dorte Mohr Carstensen: dmc@proeng.dk.

Alle henvendelser behandles fortroligt og der afholdes løbende jobsamtaler.

2019-07-28T00:50:27.377 Maskiningeniør med erfaring med uarbejdelser af PFD og PID og brænder du for selvstændighed i jobbet samt vidensdeling og sparring med dine arbejdskollegaer? Maskiningeniør med erfaring med udarbejdelser af PFD og PID Brænder du for selvstændighed i jobbet samt vidensdeling og sparring med dine arbejdskollegaer? Så skal du søge denne stilling som vil være i Nordjylland. Aalborg afdelingen har 10 faglig dygtige medarbejdere. Af væsentligste arbejds- og ansvarsopgaver kan nævnes: Udarbejdelse af massebalancer, PFD, PID og 3D Layout Konstruktionsberegning af procesanlæg, maskiner og udstyr Udvælge egnet procesteknologi og udarbejdelse af detaljeret procesdesign Dimensionering af procesanlæg -udstyr Deltagelse og planlægning af møder med kunder og respektive leverandører Deltagelse i idriftsættelse af procesanlæg hos kunden Rådgivende ingeniørarbejde udført for og hos kunder Inspektion (FAT og SAT) hos kunder og leverandører Indsamle udarbejde og validere anlægs- udstyrsdokumentation Jobbeskrivelse: Opgaverne er meget varierende og kan strække sig fra opgaver af få timers varighed, til længerevarende projekterings- og konsulentopgaver. Arbejdsstedet vil derfor afhænge af den enkelte opgave og ofte være en kombination af arbejde på kontoret og hos kunderne. Der er tale om en meget selvstændig og spændende stilling, hvor der bliver rig mulighed for at arbejde med mange forskellige problemstillinger som udvælges og tilpasses efter dine kvalifikationer. Kvalifikationer og erfaring: Du er uddannet som maskiningeniør som gerne må være suppleret med en uddannelse som svejseingeniør og med nogle års erfaring inden for olie- og gas- eller bioindustrien med en grundig og systematisk analytisk indfaldsvinkel til opgaver. Kendskab til tekniske branchestandarder vil være en fordel. Behersker IT som dit arbejdsredskab (MS Office, MS Project, AutoCAD 2D 3D, Inventor og evt. Solid Works). Som person er du selvkørende, trives med at arbejde med mange forskelligartede opgaver. Du er en imødekommende type og har nemt ved at omgås andre mennesker. Fleksibilitet og solidt drive med en resultatorienteret og innovativ arbejdsform. Evnen og lysten til at blive udstationeret ved kunder i kortere eller længere perioder. Systematisk og med gode evner til at skabe og bevare overblik, også i pressede situationer. Sprog: Behersker dansk og engelsk i skrift og tale. Vi tilbyder: En spændende stilling med mange kontakter og tæt samarbejde med en del mennesker på alle niveauer. Vores kunder spænder fra små og mellemstore virksomheder til store internationale selskaber med produktionsenheder i ind- og udlandet. Et aktivt, nærværende og uformelt miljø, med reel mulighed for at være med til at præge udviklingen fremover. Imødekommende og smilende arbejdskollegaer der kan sparre på et højt fagligt niveau. For alle vores medarbejdere er der stor mulighed for at se resultatet af egne initiativer og indsatser, samt gode personlige og faglige udviklingsmuligheder. Vi har en ambitiøs vækststrategi, som du bliver en del af. Det betyder, at du med den høje kvalitet i dit arbejde er med til at sikre, at vi har tilfredse kunder, der vender tilbage. Du kombinerer derfor din egen ekspertise med dine kollegaers gennem sparring og videndeling over telefon, mail og på kontoret. Vi prioriterer løbende kontakt med dine kollegaer højt også for at sikre, at du trives. Samtidig vil vi være en attraktiv arbejdsplads, hvor der er balance mellem arbejde og privatliv. Møder på tværs af afdelinger og årlig teambuilding, sommerfest med familien m.m. er faste ting i kalenderen Ønsker du yderligere informationer, er du velkommen til at kontakte: Afdelingsleder, Hans Langhoff Nielsen: mobil 2611 9887 Process Engineering A S LinkedIn Sådan ansøger du Har du lyst til at blive vores nye kollega, så send din ansøgning vedlagt relevante data, mrk. ref. maskiningeniør Aalborg, til HR-afdelingen: Dorte Mohr Carstensen: dmc@proeng.dk. Alle henvendelser behandles fortroligt og der afholdes løbende jobsamtaler.11jobneta53db79b100000000000IDK_OFIR_02DKDanmark228DKK2019-07-27T00:00:0000010EuropaDanmarkJyllandSyd- og SønderjyllandFredericia3554572Process Engineering A/S11Strevelinsvej 367000FredericiaDKDanmark0
dmc@proeng.dkDKDanmarkDanmark
8Fuldtid46Permanent785081JobNet5011051501105110027-06-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=a53db79bhttps://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=a53db79bhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=a53db79b&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=a53db79b&page=EmailApplyForm&component=SendApplicationButtonhttps://static.matchwork.com/company/logo/DK/ORS/SoMe/IT_Ingenioer_og_energi/Ingenioer_og_naturvidenskab/5.jpgMaskiningeniør med erfaring med udarbejdelser af PFD & PID12008011Dansk3Læse/ tale214501Maskiningeniør20Ingeniør og naturvidenskab362154436dmc@proeng.dkdmc@proeng.dkDanmarkDanmark330078169Engineers with EASA Part 66 B1 AML for Line MaintenanceRobot Skyways Technics A S is searching for qualified, motivated and team oriented Engineers for both our Base Maintenance as well as our Line Maintenance working on fixed wing aircraft. We offer permanent positions located at our facility in Sønderborg or Billund, Denmark. Preferable is applicants with AML and relevant type courses on the following aircraft: ATR 42 72 series, however we also welcome applicant that are interested in becoming type rated on the mentioned aircarfts. Certified Engineers with Team Leader experience are also of interest. You will work in a team with highly qualified colleagues and must expect varied working hours including night shift. Applications are invited from candidates with the following skills and experience: Proven EASA Part 66 B1 AML or combined B1 B2 Previous experience on line maintenance as a technician Can work structured, autonomous and good at decision making Quality conscious Excellent English knowledge Team player Remain calm in stressful situations You are energetic and flexible Applicants must have the right to live and work in Denmark Your options: When you join Skyways Technics A S, you sign up for an exciting and all-round job as permanent staff member in an international environment. An exciting and challenging opportunity for a highly motivated individual with a go-to attitude, prepared to work both autonomously and as a team player. Major changes and fast expansion within the organization provides great opportunities for both personal and professional development. You will be working within a young company where Competence, Co-operation, Respect and Responsibility are key values. Application: If you have any questions as to the job, please contact Base Maintenance Manager Werner B. Johansen, phone 45 22 33 98 85, email wbj@skywaystechnics.com or Line Maintenance Manager Kenn Knudsen, phone 45 27 77 97 15, kdk@skywaystechnics.com Please apply at your earliest convenience. We do not have an application deadline but accept applications as long as the job is posted. The position will be closed down once we have found the right candidate. Please send your application with relevant documentation to: workwithus@skywaystechnics.com

Skyways Technics A/S is searching for qualified, motivated and team oriented Engineers for both our Base Maintenance as well as our Line Maintenance working on fixed wing aircraft. We offer permanent positions located at our facility in Sønderborg or Billund, Denmark.

Preferable is applicants with AML and relevant type courses on the following aircraft: ATR 42/72 series, however we also welcome applicant that are interested in becoming type rated on the mentioned aircarfts. Certified Engineers with Team Leader experience are also of interest.

You will work in a team with highly qualified colleagues and must expect varied working hours including night shift.

Applications are invited from candidates with the following skills and experience:

  • Proven EASA Part 66 B1 AML or combined B1/B2
  • Previous experience on line maintenance as a technician
  • Can work structured, autonomous and good at decision making
  • Quality conscious
  • Excellent English knowledge
  • Team player
  • Remain calm in stressful situations
  • You are energetic and flexible
  • Applicants must have the right to live and work in Denmark

Your options:

When you join Skyways Technics A/S, you sign up for an exciting and all-round job as permanent staff member in an international environment. An exciting and challenging opportunity for a highly motivated individual with a go-to attitude, prepared to work both autonomously and as a team player. Major changes and fast expansion within the organization provides great opportunities for both personal and professional development. You will be working within a young company where Competence, Co-operation, Respect and Responsibility are key values.

Application:

If you have any questions as to the job, please contact Base Maintenance Manager Werner B. Johansen, phone +45 22 33 98 85,  email wbj@skywaystechnics.com or Line Maintenance Manager Kenn Knudsen, phone +45 27 77 97 15, kdk@skywaystechnics.com

Please apply at your earliest convenience. We do not have an application deadline but accept applications as long as the job is posted. The position will be closed down once we have found the right candidate. Please send your application with relevant documentation to: workwithus@skywaystechnics.com

SKYWAYS TECHNICS A/S, BLLBillund2019-08-26T00:00:002019-10-17T00:00:00
330091974Moulding Process EngineerRobot Are you an injection moulding engineer or highly skilled injection moulding technician with a strong desire to continuously develop and improve production efficiency and productivity? Then this is your opportunity to join the LEGO Group and become a member of a great team at our state of the art factory in Billund! Core Responsibilities In this role you will work in a unique organisation and collaborate with highly skilled colleagues within injection moulding. Your tasks will include: • Optimization of production efficiency and productivity through daily engagement with the different production capacity areas. • Mapping and standardization of the critical parameters of equipment and moulding processes • Execution of engineering initiatives to capture the relevant process improvement opportunities • Troubleshooting of new or existing product problems involving materials or processes • Supporting design for manufacturing and novelty introductions • Taking an active role in continuous improvement and defect prevention methodology • Taking responsibility for maintenance and improvement of local and global process instructions and OPL of products and processes in compliance with ISO • On a daily basis you will furthermore be supporting Supply Chain, Engineering, Logistic master data, Logistic and Planning, as well as you will be involved in various global development projects. Play your part in our team succeeding As our future colleague in MPE E Moulding Process Engineering Education you will play an essential role in both maintaining and developing the future processes combined with new and old injection moulding platforms, material platforms, equipment platforms, process optimization of both old and new moulds and much much more together with colleagues from our sister factories in Hungary, China and Mexico. Do you have what it takes? There are different entries into this position. You could either have a strong injection moulding technician background combined with e.g. plastics specialist experience or similar, or you can come with a Master s or Bachelor degree within Mechanical, Chemical or Mechatronics Engineering. Furthermore, you have: • At least 4 years of injection moulding experience with a strong focus on quality and structured problem solving mindset • a solid understanding of injection moulding and or manufacturing and quality processes • Solid technological knowledge • English and Danish language skills at minimum communication level • User level IT knowledge (advantage: SAP knowledge) • An openminded personality • Analytical skills You will succeed in the role with a proactive and self-driven attitude with a sensitivity towards improvements and a precise workstyle. You are a great teammate who thrives and contributes best in a team setting as well as you take initiative, recognize and act on opportunities. BRINGING IT TO LIFE The LEGO factory in Billund Denmark is a state of the art factory with a combination of production and development qualifying projects, both in terms of equipment and platforms, but also related to materials and masterbatches in general, just to mention a few of the many super amazing fields of our Awesome factory.

Are you an injection moulding engineer or highly skilled injection moulding technician with a strong desire to continuously develop and improve production efficiency and productivity?

Then this is your opportunity to join the LEGO Group and become a member of a great team at our state of the art factory in Billund!

Core Responsibilities

In this role you will work in a unique organisation and collaborate with highly skilled colleagues within injection moulding.

Your tasks will include:

• Optimization of production efficiency and productivity through daily engagement with the different production/capacity areas.

• Mapping and standardization of the critical parameters of equipment and moulding processes

• Execution of engineering initiatives to capture the relevant process improvement opportunities

• Troubleshooting of new or existing product problems involving materials or processes

• Supporting design for manufacturing and novelty introductions

• Taking an active role in continuous improvement and defect prevention methodology

• Taking responsibility for maintenance and improvement of local and global process instructions and OPL of products and processes in compliance with ISO

• On a daily basis you will furthermore be supporting Supply Chain, Engineering, Logistic master data, Logistic and Planning, as well as you will be involved in various global development projects.

Play your part in our team succeeding

As our future colleague in MPE&E / Moulding Process Engineering & Education you will play an essential role in both maintaining and developing the future processes combined with new and old injection moulding platforms, material platforms, equipment platforms, process optimization of both old and new moulds and much much more together with colleagues from our sister factories in Hungary, China and Mexico.

Do you have what it takes?

There are different entries into this position. You could either have a strong injection moulding technician background combined with e.g. plastics specialist experience or similar, or you can come with a Master’s or Bachelor degree within Mechanical, Chemical or Mechatronics Engineering. Furthermore, you have:

• At least 4 years of injection moulding experience with a strong focus on quality and structured problem solving mindset

• a solid understanding of injection moulding and/or manufacturing and quality processes

• Solid technological knowledge

• English and Danish language skills at minimum communication level

• User level IT knowledge (advantage: SAP knowledge)

• An openminded personality

• Analytical skills

You will succeed in the role with a proactive and self-driven attitude with a sensitivity towards improvements and a precise workstyle.
You are a great teammate who thrives and contributes best in a team setting as well as you take initiative, recognize and act on opportunities.

BRINGING IT TO LIFE

The LEGO factory in Billund Denmark is a state of the art factory with a combination of production and development/qualifying projects, both in terms of equipment and platforms, but also related to materials and masterbatches in general, just to mention a few of the many super amazing fields of our Awesome factory.

LEGO SYSTEM A/SBillund2019-09-18T00:00:002019-10-02T00:00:00
330090104Ingeniørpraktik inden for MekanikRobot Ingeniørpraktik inden for Mekanik Vi søger 2-3 studerende til ingeniørpraktik inden for mekanik, som har gå-på-mod og lyst til at blive en del af et dynamisk team. Du vil som en naturlig del af teamet blive inddraget i problemstillinger, samt indgå i arbejdet med både større og mindre projekter. Vi søger praktikanter inden for flere områder: Existing Products, R D og Produktionsteknik. I Existing Products kan opgaver være at analysere og gennemføre tekniske forbedringer på produkter, gennemføre kostoptimeringer og mindre mekaniske udviklingsprojekter så produktet bibeholder sin konkurrencedygtighed, samt at gennemføre kvalitetsforbedringsopgaver og reklamationsbehandling. Se videoen her om hvordan det er at være i Existing Products (mekanik) hos LINAK. I R D vil du arbejde med nuværende udviklingsprojekter og tage del i processen fra ide til løbende produktion. Opgaver kan være mekaniske beregnings- og konstruktionsopgaver, praktisk gennemførelse af test og analyse relateret til egne opgaver samt dokumentation af eget arbejde igennem hele udviklingsforløbet. Se videoen her om hvordan det er at være mekanikudvikler hos LINAK. Inden for Produktionsteknik er du med til at specificere og udvikle produktionsudstyr, som både kan være traditionelt udstyr, samt automatisering med collaborative robotter m.v.. Arbejdet sker i tæt samarbejde med medarbejderne i produktionen og eksterne leverandører. Du: er i gang med en relevant ingeniøruddannelse og brænder for mekanik er positiv, imødekommende og kan lide at kommunikere med andre er fleksibel og har gå-på-mod bliver motiveret af faglige udfordringer taler og forstår dansk på grundlæggende niveau Hvorfor LINAK? Løn under praktikperioden Betalt kollegieværelse, hvis du ikke bor i nærheden Ansvar for egne projekter og mulighed for at afprøve teori i praksis Sociale arrangementer med de 15-20 andre praktikanter. Hvis du vil vide mere om, hvordan det er at være praktikant hos LINAK, kan du klikke her. Evt. mulighed for et samarbejde om dit afgangsprojekt efterfølgende Faglig sparring og udvikling med den praktikansvarlige Din ansøgning: skal udtrykke du brænder allermest for at arbejde med under din praktik skal indikere tidsrammen og tidspunkt for praktikken skal indeholde din motivation for at vælge LINAK som praktiksted skal indeholde dit foreløbige karakterudskrift Ansøgningsfrist til forårssemesteret 2020: 15. november 2019. Ansøgninger behandles løbende og i nogle tilfælde indkaldes også til samtaler før ansøgningsfristen. Start: 1. februar 2020. LINAK god arbejdsplads × faglige udfordringer2 Vi er markedsledende, sætter kunden i første række og udfordrer status quo. Dette giver os mange spændende faglige udfordringer, og vi overvejer altid, hvordan vi kan gøre vores arbejde mere effektivt og innovativt. Samtidig prioriterer vi en fornuftig balance mellem arbejdsliv og privatliv. Du er omgivet af erfarne og fagligt stærke kolleger i en team-orienteret kultur, og hvor samarbejde og fleksibilitet er i højsædet. Ønsker du flere oplysninger, er du velkommen til at kontakte en af vores HR konsulenter Ida Falkenham på 73151875 eller Catharina Christensen på tlf. 73151635. LINAK A S Group Headquarters Smedevænget 8, Guderup 6430 Nordborg

Ingeniørpraktik inden for Mekanik

Vi søger 2-3 studerende til ingeniørpraktik inden for mekanik, som har gå-på-mod og lyst til at blive en del af et dynamisk team. Du vil – som en naturlig del af teamet – blive inddraget i problemstillinger, samt indgå i arbejdet med både større og mindre projekter.

Vi søger praktikanter inden for flere områder: Existing Products, R&D og Produktionsteknik.

I Existing Products kan opgaver være at analysere og gennemføre tekniske forbedringer på produkter, gennemføre kostoptimeringer og mindre mekaniske udviklingsprojekter så produktet bibeholder sin konkurrencedygtighed, samt at gennemføre kvalitetsforbedringsopgaver og reklamationsbehandling. Se videoen her om hvordan det er at være i Existing Products (mekanik) hos LINAK.

I R&D vil du arbejde med nuværende udviklingsprojekter og tage del i processen fra ide til løbende produktion. Opgaver kan være mekaniske beregnings- og konstruktionsopgaver, praktisk gennemførelse af test og analyse relateret til egne opgaver samt dokumentation af eget arbejde igennem hele udviklingsforløbet. Se videoen her om hvordan det er at være mekanikudvikler hos LINAK.

Inden for Produktionsteknik er du med til at specificere og udvikle produktionsudstyr, som både kan være traditionelt udstyr, samt automatisering med collaborative robotter m.v.. Arbejdet sker i tæt samarbejde med medarbejderne i produktionen og eksterne leverandører.

Du:  

  • er i gang med en relevant ingeniøruddannelse og brænder for mekanik
  • er positiv, imødekommende og kan lide at kommunikere med andre
  • er fleksibel og har gå-på-mod
  • bliver motiveret af faglige udfordringer
  • taler og forstår dansk på grundlæggende niveau


Hvorfor LINAK? 

  • Løn under praktikperioden
  • Betalt kollegieværelse, hvis du ikke bor i nærheden
  • Ansvar for egne projekter og mulighed for at afprøve teori i praksis
  • Sociale arrangementer med de 15-20 andre praktikanter. Hvis du vil vide mere om, hvordan det er at være praktikant hos LINAK, kan du klikke her.
  • Evt. mulighed for et samarbejde om dit afgangsprojekt efterfølgende
  • Faglig sparring og udvikling med den praktikansvarlige


Din ansøgning: 

  • skal udtrykke du brænder allermest for at arbejde med under din praktik
  • skal indikere tidsrammen og tidspunkt for praktikken
  • skal indeholde din motivation for at vælge LINAK som praktiksted
  • skal indeholde dit foreløbige karakterudskrift

 

Ansøgningsfrist til forårssemesteret 2020: 15. november 2019. Ansøgninger behandles løbende og i nogle tilfælde indkaldes også til samtaler før ansøgningsfristen. 

Start: 1. februar 2020.


LINAK = god arbejdsplads × faglige udfordringer2

Vi er markedsledende, sætter kunden i første række og udfordrer status quo. Dette giver os mange spændende faglige udfordringer, og vi overvejer altid, hvordan vi kan gøre vores arbejde mere effektivt og innovativt. Samtidig prioriterer vi en fornuftig balance mellem arbejdsliv og privatliv. Du er omgivet af erfarne og fagligt stærke kolleger i en team-orienteret kultur, og hvor samarbejde og fleksibilitet er i højsædet.   

Ønsker du flere oplysninger, er du velkommen til at kontakte en af vores HR konsulenter Ida Falkenham på 73151875 eller Catharina Christensen på tlf. 73151635.

LINAK A/S
Group Headquarters
Smedevænget 8, Guderup
6430 Nordborg

LINAK A/SNordborg2019-09-14T00:00:002019-11-08T00:00:00
330090009Certification Engineer within Business Area Wind OffshoreRobot Do you want to shape the future? Join our journey towards Fossil Free Living within one generation. Business Area (BA) Wind is responsible for Vattenfall s Onshore and Offshore Wind as well as other non-hydro Renewable activities like Solar and Batteries. Today we develop, construct and operate wind generation and solar and batteries installations in Sweden, Denmark, Germany, the Netherlands and the UK. We are now looking for a Certification Engineer for our Business Area Wind. Are you interested in a job with a lot of potential, possibilities and responsibilities and be a part of a growing organization with special focus on Offshore Wind, you may be the person we are looking for. Your job as Certification Engineer: Manage project certification tasks as integrated part of offshore wind project teams Support product development projects in certification aspects (e.g. substations, foundation types) Support project specific implementation of certification processes, aligned with BA Wind certification strategy and national regulatory requirements Ensure project certification requirements are represented in commercial agreements and contracts (e.g. access to documentation and sites, timelines, interfaces) Conduct sourcing processes together with procurement department to contract required certification services, lead of technical and commercial negotiations with certification bodies Facilitate certification process and ensure deliverables from project suppliers (documents, audits, inspections) are provided aligned to with certification body as well as results (reports, statements, certificates) are presented by certification body in due time and quality Coordinate document review process and interfaces during load iteration and foundation design processes between certification body, project team and suppliers Ensure type certificate is delivered in time and quality as well as properly implemented in the project certification process Handle reporting of certification work package and provide input to internal decision processes Take on technical matters in support of other work packages contribution to timely close out of certification related requirements Work alongside Certification Engineers across wind projects to harmonize way of working in field of certification and to utilization of best practice. Your profile as a Certification Engineer: University degree in Engineering or similar Knowledgeable about type and project certification in (offshore) wind projects, as well as related codes standards (e.g. IEC 64100 and IECRE OD series, etc.) Work experience in wind turbine type and or project certification beneficial Knowledgeable about national (offshore) wind permitting regimes Minimum of 3 years of work experience within technical project management (preferably wind energy) Proven project management skills and ability to handle independent contractor certification body Professional experience within technical project management Motivated to work in a multi-national project teams and the ability to build up strong relationships with internal and external stakeholders Excellent communication skills and experience in multicultural work environment Fluent in English, German and or Danish language skills preferred. Location: The location of the position is either Hamburg or Kolding. We offer: Work in an open, agile and modern environment and collaborating with great colleagues who support each other. Offering you a work environment with diverse, international and inspiring colleagues where we focus on resilience, knowing that this is a key element for your wellbeing. We support the reconciliation between work and private life with flexible working conditions supported by a smart travel policy. The advantages of working for Vattenfall are about more than money join our journey towards Fossil Free Living within one generation. More information: We welcome your application in English, including CV and cover letter via the application button at this page. Last day to apply is 9 September 2019. For more information about the position you are welcome to contact Philipp Degenhardt, Head of Verification Integration on 49 172 4233061. For more information about the recruitment process contact Vanessa Koop, Recruitment, phone 49 40 79022 7786. At Vattenfall we are convinced that diversity contributes to build a more profitable and attractive company and we strive to be good role model regarding diversity. Vattenfall works actively for all employees to have the same opportunities and rights regardless of gender, ethnicity, age, transgender identity or expression, religion or other belief, disability or sexual orientation. We look forward to receiving your application!

Do you want to shape the future? Join our journey towards Fossil Free Living within one generation. 

Business Area (BA) Wind is responsible for Vattenfall’s Onshore and Offshore Wind as well as other non-hydro Renewable activities like Solar and Batteries.

Today we develop, construct and operate wind generation and solar and batteries installations in Sweden, Denmark, Germany, the Netherlands and the UK. 

We are now looking for a Certification Engineer for our Business Area Wind. Are you interested in a job with a lot of potential, possibilities and responsibilities and be a part of a growing organization with special focus on Offshore Wind, you may be the person we are looking for.  

Your job as Certification Engineer:

  • Manage project certification tasks as integrated part of offshore wind project teams;
  • Support product development projects in certification aspects (e.g. substations, foundation types);
  • Support project specific implementation of certification processes, aligned with BA Wind certification strategy and national regulatory requirements;
  • Ensure project certification requirements are represented in commercial agreements and contracts (e.g. access to documentation and sites, timelines, interfaces);
  • Conduct sourcing processes together with procurement department to contract required certification services, lead of technical and commercial negotiations with certification bodies;
  • Facilitate certification process and ensure deliverables from project / suppliers (documents, audits, inspections) are provided/aligned to/with certification body as well as results (reports, statements, certificates) are presented by certification body in due time and quality;
  • Coordinate document review process and interfaces during load iteration and foundation design processes between certification body, project team and suppliers;
  • Ensure type certificate is delivered in time and quality as well as properly implemented in the project certification process;
  • Handle reporting of certification work package and provide input to internal decision processes;
  • Take on technical matters in support of other work packages contribution to timely close out of certification related requirements;
  • Work alongside Certification Engineers across wind projects to harmonize way of working in field of certification and to utilization of best practice.

 Your profile as a Certification Engineer:

  • University degree in Engineering or similar;
  • Knowledgeable about type and project certification in (offshore) wind projects, as well as related codes & standards (e.g. IEC 64100 and IECRE OD series, etc.);
  • Work experience in wind turbine type and/or project certification beneficial;
  • Knowledgeable about national (offshore) wind permitting regimes ;
  • Minimum of 3 years of work experience within technical project management (preferably wind energy);
  • Proven project management skills and ability to handle “independent” contractor certification body;
  • Professional experience within technical project management;
  • Motivated to work in a multi-national project teams and the ability to build up strong relationships with internal and external stakeholders;
  • Excellent communication skills and experience in multicultural work environment;
  • Fluent in English, German and/or Danish language skills preferred.

Location:

The location of the position is either Hamburg or Kolding. 

We offer:

Work in an open, agile and modern environment and collaborating with great colleagues who support each other. Offering you a work environment with diverse, international and inspiring colleagues where we focus on resilience, knowing that this is a key element for your wellbeing.

We support the reconciliation between work and private life with flexible working conditions supported by a smart travel policy.

The advantages of working for Vattenfall are about more than money – join our journey towards Fossil Free Living within one generation. 

More information:

We welcome your application in English, including CV and cover letter via the application button at this page. Last day to apply is 9 September 2019. For more information about the position you are welcome to contact Philipp Degenhardt, Head of Verification & Integration on +49 172 4233061. 

For more information about the recruitment process contact Vanessa Koop, Recruitment, phone +49 40 79022 7786. 

At Vattenfall we are convinced that diversity contributes to build a more profitable and attractive company and we strive to be good role model regarding diversity. Vattenfall works actively for all employees to have the same opportunities and rights regardless of gender, ethnicity, age, transgender identity or expression, religion or other belief, disability or sexual orientation. 

We look forward to receiving your application!

Vattenfall A/SKolding2019-09-13T00:00:002019-11-08T00:00:00
330086042Technical Supervisor, Turbine Operations CentreRobot Be the technical expert at our Turbine Operations Centre Are you an experienced WTG trouble-shooter looking for new challenges? Would you like to join a team of highly competent and dedicated colleagues? We are looking for new Technical Supervisors for our Turbine Operations Centre in Esbjerg, Denmark. You will be working on both day and night shifts. Tasks responsibilities: You will… …be the technical expert at the Turbine Operations Centre, providing technical advice and input to the Operator. You will perform remote troubleshooting and fault-finding for all WTG types and Mk versions. To minimise the loss of production due to WTG breakdowns, you will support the Operator in responding to internal and external stakeholder requests. From time-to-time, you will as Technical Supervisor also be deployed to service sites across the MHI Vestas fleet. This may be to support troubleshooting on site for particularly challenging issues but also to keep your technical competencies up-to-date. You will also be responsible for: Remote monitoring of offshore WTGs Reactive operation of offshore WTGs Support to field operation through remote operation Support to SCADA Support to HSE (e.g. during emergency situations) Support to power regulations and substation grid maintenance Coordinate execution of ad-hoc STOP START WTG requests Follow-up on SCADA events with Performance and Diagnostics Support root cause investigations Skills experience: Our new colleague… …is highly technically competent and has field experience working with WTG troubleshooting. To succeed in this role, it is important that you are only able to spot technical issues but also able to communicate these to your colleagues. You enjoy working in teams and thrive in a role where you work with many different personalities and functions. We expect that you: Have a structured approach to your tasks Are self-motivated and quality-oriented Have good English communication skills Are a confident user of Microsoft Office applications (Word, Excel, PowerPoint) Have experience with SCADA tools (advanced level) Are flexible and willing to travel Join us if you… ...want to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional. The Turbine Operations Centre is part of the Special Projects team where we offer you: Great colleagues that support each other and work together Excellent opportunities for professional and personal development A role where you can use your technical expertise Apply now We re already looking forward to hearing from you. In case you have questions about the position, please contact Director, Special Projects, Stephen Booth, on 45 5096 5247. Your primary work location will be Esbjerg, Denmark, and you could expect approx. 45-60 travel days per year, but this will vary. You will be working on both day and night shifts. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially. Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with 3000 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan, Japan and the USA.

Be the technical expert at our Turbine Operations Centre

Are you an experienced WTG trouble-shooter looking for new challenges? Would you like to join a team of highly competent and dedicated colleagues?

We are looking for new Technical Supervisors for our Turbine Operations Centre in Esbjerg, Denmark. You will be working on both day and night shifts. 

Tasks & responsibilities: You will…

…be the technical expert at the Turbine Operations Centre, providing technical advice and input to the Operator. You will perform remote troubleshooting and fault-finding for all WTG types and Mk versions. To minimise the loss of production due to WTG breakdowns, you will support the Operator in responding to internal and external stakeholder requests. 

From time-to-time, you will as Technical Supervisor also be deployed to service sites across the MHI Vestas fleet. This may be to support troubleshooting on site for particularly challenging issues but also to keep your technical competencies up-to-date. 

You will also be responsible for: 

  • Remote monitoring of offshore WTGs
  • Reactive operation of offshore WTGs
  • Support to field operation through remote operation 
  • Support to SCADA
  • Support to HSE (e.g. during emergency situations)
  • Support to power regulations and substation/grid maintenance
  • Coordinate execution of ad-hoc STOP/START WTG requests
  • Follow-up on SCADA events with Performance and Diagnostics
  • Support root cause investigations

Skills & experience: Our new colleague…

…is highly technically competent and has field experience working with WTG troubleshooting. To succeed in this role, it is important that you are only able to spot technical issues but also able to communicate these to your colleagues. You enjoy working in teams and thrive in a role where you work with many different personalities and functions. 

We expect that you: 

  • Have a structured approach to your tasks
  • Are self-motivated and quality-oriented
  • Have good English communication skills
  • Are a confident user of Microsoft Office applications (Word, Excel, PowerPoint) 
  • Have experience with SCADA tools (advanced level)
  • Are flexible and willing to travel

Join us if you…

...want to work in an international and ambitious company where we work shoulder to shoulder every day to become the global leader in the offshore wind market. You will be part of a dedicated team in an organisation characterised by being ambitious, innovative and professional.

The Turbine Operations Centre is part of the Special Projects team where we offer you:

  • Great colleagues that support each other and work together
  • Excellent opportunities for professional and personal development
  • A role where you can use your technical expertise

Apply now

We’re already looking forward to hearing from you. In case you have questions about the position, please contact Director, Special Projects, Stephen Booth, on +45 5096 5247. Your primary work location will be Esbjerg, Denmark, and you could expect approx. 45-60 travel days per year, but this will vary. You will be working on both day and night shifts. Please note that applications are handled on an ongoing basis. So, please send your application and CV as soon as possible using the link on this page. We treat all inquiries confidentially. 

Established in April 2014, MHI Vestas Offshore Wind is a joint venture between Mitsubishi Heavy Industries (MHI) and Vestas Wind Systems A/S. Our vision is to be a leading player in the offshore industry by co-developing offshore wind as a financially viable and sustainable energy source to benefit future generations. An international organisation with +3000 employees and HQ in Aarhus, Denmark, we also have offices in the UK, Netherlands, Belgium, Germany, Taiwan, Japan and the USA.

MHI Vestas Offshore Wind A/SEsbjerg2019-09-06T00:00:002019-11-01T00:00:00
da-DK

Andre job der matcher din søgning

Engineers with EASA Part 66 B1 AML for Line Maintenance

SKYWAYS TECHNICS A/S, BLL

Billund
Skyways Technics A S is searching for qualified, motivated and team oriented Engineers for both our Base Maintenance as well as our Line Maintenance working on fixed wing aircraft. We offer permanent positions located at our facility in Sønderborg o...
Indrykket:26. august 2019
Udløbsdato:17. oktober 2019

Moulding Process Engineer

LEGO SYSTEM A/S

Billund
Are you an injection moulding engineer or highly skilled injection moulding technician with a strong desire to continuously develop and improve production efficiency and productivity? Then this is your opportunity to join the LEGO Group and become a...
Indrykket:18. september 2019
Udløbsdato:2. oktober 2019

Ingeniørpraktik inden for Mekanik

LINAK A/S

Nordborg
Ingeniørpraktik inden for Mekanik Vi søger 2-3 studerende til ingeniørpraktik inden for mekanik, som har gå-på-mod og lyst til at blive en del af et dynamisk team. Du vil som en naturlig del af teamet blive inddraget i problemstillinger, samt indgå ...
Indrykket:14. september 2019
Udløbsdato:8. november 2019

Certification Engineer within Business Area Wind Offshore

Vattenfall A/S

Kolding
Do you want to shape the future? Join our journey towards Fossil Free Living within one generation. Business Area (BA) Wind is responsible for Vattenfall s Onshore and Offshore Wind as well as other non-hydro Renewable activities like Solar and Batt...
Indrykket:13. september 2019
Udløbsdato:8. november 2019

Technical Supervisor, Turbine Operations Centre

MHI Vestas Offshore Wind A/S

Esbjerg
Be the technical expert at our Turbine Operations Centre Are you an experienced WTG trouble-shooter looking for new challenges? Would you like to join a team of highly competent and dedicated colleagues? We are looking for new Technical Supervisors ...
Indrykket:6. september 2019
Udløbsdato:1. november 2019