Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

Projektering af industrielle pumpeløsninger

Har du erfaring med projektering af pumpeløsninger eller er du ingeniør eller maskinmester? Er du interesseret i at blive en del af et førende, markedsorienteret og professionelt team? Og vil du gerne arbejde med velkendte produkter og løsninger af høj kvalitet? I en virksomhed, hvor du vil modtage løbende uddannelse – såvel internt som hos producenter? 

Så vil vi gerne i kontakt med dig; Vi søger en medarbejder til projektering af pumpeløsninger til industrien i pumpeafdelingen hos Armatec A/S. Armatecs pumpeafdeling leverer et bredt program af pumper og pumpeløsninger fra bl.a. Flowserve/SIHI, Hallberg, Leistritz og en serie centrifugalpumper og pumpesystemer. Med dette brede program af europæisk producerede pumper af høj kvalitet kan virksomheden levere den optimale pumpeløsning til stort set alle processer og medier.  

Armatec A/S er en del af en nordisk koncern med selskaber i Danmark, Sverige, Norge og Finland.    

Dine daglige arbejdsopgaver vil omhandle:  

  • Projektering og kunderådgivning 
  • Kontakt til leverandører og kunder personligt og pr telefon
  • Håndtering af projekter og ordrer fra A-Z
  • Dimensionering og beregning af pumpeløsninger
  • Udarbejdelse af tilbud og opfølgning
  • Produktansvarlig for udvalgte produkter

 Dine faglige kvalifikationer:  

  • Du er ingeniør eller maskinmester, eller du har mindst 5 års erfaring med pumper og ovenstående opgaver
  • Du brænder for tekniske løsninger og produkter
  • Du har gerne erfaring fra en teknisk salgsafdeling
  • Du er god til it – herunder Excel 
  • Du er flydende på dansk og kan kommunikere mundtligt og skriftligt på engelsk. Kan du tysk, er det et plus

Personlige kvalifikationer: 

  • Du arbejder struktureret, selvstændigt og proaktivt 
  • Du trives med at være tovholder på flere projekter
  • Du er udadvendt, imødekommende og positiv
  • Du er ansvarsbevidst og fleksibelt indstillet

Virksomheden tilbyder:  

  • Et afvekslende job
  • Uddannelse, såvel internt som hos producenter
  • Velkendte produkter og løsninger af høj kvalitet 
  • Masser af personlige og faglige udfordringer 
  • En plads i et førende, markedsorienteret og professionelt team
  • En fri og frisk omgangstone
  • God løn, pensions- og arbejdsforhold

Du kan lære mere om virksomheden på www.armatec.dk  

Hvis du vil videre:  
Har du spørgsmål til stillingen, er du velkommen til at kontakte chefkonsulent Tina Løwenstein Noesgaard på tln@centrum-personale.dk 

Du søger stillingen ved at sende din ansøgning og dit CV via dette link:

https://centrum-personale.dk/ledige-stillinger/ingeniorer/ledig-stilling/?refid=674-3486 

Vi indkalder kandidater til samtale løbende, og rekrutteringsprocessen bliver afsluttet, når den rette kandidat er fundet.  

Se flere stillinger på: www.centrum-personale.dk


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330127016Phoenix-4c88ac2412019-11-25T00:00:00Projektering af industrielle pumpeløsninger

Har du erfaring med projektering af pumpeløsninger eller er du ingeniør eller maskinmester? Er du interesseret i at blive en del af et førende, markedsorienteret og professionelt team? Og vil du gerne arbejde med velkendte produkter og løsninger af høj kvalitet? I en virksomhed, hvor du vil modtage løbende uddannelse – såvel internt som hos producenter? 

Så vil vi gerne i kontakt med dig; Vi søger en medarbejder til projektering af pumpeløsninger til industrien i pumpeafdelingen hos Armatec A/S. Armatecs pumpeafdeling leverer et bredt program af pumper og pumpeløsninger fra bl.a. Flowserve/SIHI, Hallberg, Leistritz og en serie centrifugalpumper og pumpesystemer. Med dette brede program af europæisk producerede pumper af høj kvalitet kan virksomheden levere den optimale pumpeløsning til stort set alle processer og medier.  

Armatec A/S er en del af en nordisk koncern med selskaber i Danmark, Sverige, Norge og Finland.    

Dine daglige arbejdsopgaver vil omhandle:  

  • Projektering og kunderådgivning 
  • Kontakt til leverandører og kunder personligt og pr telefon
  • Håndtering af projekter og ordrer fra A-Z
  • Dimensionering og beregning af pumpeløsninger
  • Udarbejdelse af tilbud og opfølgning
  • Produktansvarlig for udvalgte produkter

 Dine faglige kvalifikationer:  

  • Du er ingeniør eller maskinmester, eller du har mindst 5 års erfaring med pumper og ovenstående opgaver
  • Du brænder for tekniske løsninger og produkter
  • Du har gerne erfaring fra en teknisk salgsafdeling
  • Du er god til it – herunder Excel 
  • Du er flydende på dansk og kan kommunikere mundtligt og skriftligt på engelsk. Kan du tysk, er det et plus

Personlige kvalifikationer: 

  • Du arbejder struktureret, selvstændigt og proaktivt 
  • Du trives med at være tovholder på flere projekter
  • Du er udadvendt, imødekommende og positiv
  • Du er ansvarsbevidst og fleksibelt indstillet

Virksomheden tilbyder:  

  • Et afvekslende job
  • Uddannelse, såvel internt som hos producenter
  • Velkendte produkter og løsninger af høj kvalitet 
  • Masser af personlige og faglige udfordringer 
  • En plads i et førende, markedsorienteret og professionelt team
  • En fri og frisk omgangstone
  • God løn, pensions- og arbejdsforhold

Du kan lære mere om virksomheden på www.armatec.dk  

Hvis du vil videre:  
Har du spørgsmål til stillingen, er du velkommen til at kontakte chefkonsulent Tina Løwenstein Noesgaard på tln@centrum-personale.dk 

Du søger stillingen ved at sende din ansøgning og dit CV via dette link:

https://centrum-personale.dk/ledige-stillinger/ingeniorer/ledig-stilling/?refid=674-3486 

Vi indkalder kandidater til samtale løbende, og rekrutteringsprocessen bliver afsluttet, når den rette kandidat er fundet.  

Se flere stillinger på: www.centrum-personale.dk

2019-12-16T14:52:01.920 Har du erfaring med projektering af pumpeløsninger eller er du ingeniør eller maskinmester? Er du interesseret i at blive en del af et førende, markedsorienteret og professionelt team? Og vil du gerne arbejde med velkendte produkter og løsninger af høj kvalitet? I en virksomhed, hvor du vil modtage løbende uddannelse såvel internt som hos producenter? Så vil vi gerne i kontakt med dig Vi søger en medarbejder til projektering af pumpeløsninger til industrien i pumpeafdelingen hos Armatec A S. Armatecs pumpeafdeling leverer et bredt program af pumper og pumpeløsninger fra bl.a. Flowserve SIHI, Hallberg, Leistritz og en serie centrifugalpumper og pumpesystemer. Med dette brede program af europæisk producerede pumper af høj kvalitet kan virksomheden levere den optimale pumpeløsning til stort set alle processer og medier. Armatec A S er en del af en nordisk koncern med selskaber i Danmark, Sverige, Norge og Finland. Dine daglige arbejdsopgaver vil omhandle: Projektering og kunderådgivning Kontakt til leverandører og kunder personligt og pr telefonHåndtering af projekter og ordrer fra A-ZDimensionering og beregning af pumpeløsningerUdarbejdelse af tilbud og opfølgningProduktansvarlig for udvalgte produkter Dine faglige kvalifikationer: Du er ingeniør eller maskinmester, eller du har mindst 5 års erfaring med pumper og ovenstående opgaverDu brænder for tekniske løsninger og produkterDu har gerne erfaring fra en teknisk salgsafdelingDu er god til it herunder Excel Du er flydende på dansk og kan kommunikere mundtligt og skriftligt på engelsk. Kan du tysk, er det et plus Personlige kvalifikationer: Du arbejder struktureret, selvstændigt og proaktivt Du trives med at være tovholder på flere projekterDu er udadvendt, imødekommende og positivDu er ansvarsbevidst og fleksibelt indstillet Virksomheden tilbyder: Et afvekslende jobUddannelse, såvel internt som hos producenterVelkendte produkter og løsninger af høj kvalitet Masser af personlige og faglige udfordringer En plads i et førende, markedsorienteret og professionelt teamEn fri og frisk omgangstoneGod løn, pensions- og arbejdsforhold Du kan lære mere om virksomheden på www.armatec.dk Hvis du vil videre: Har du spørgsmål til stillingen, er du velkommen til at kontakte chefkonsulent Tina Løwenstein Noesgaard på tln@centrum-personale.dk Du søger stillingen ved at sende din ansøgning og dit CV via dette link: https: centrum-personale.dk ledige-stillinger ingeniorer ledig-stilling ?refid 674-3486 Vi indkalder kandidater til samtale løbende, og rekrutteringsprocessen bliver afsluttet, når den rette kandidat er fundet. Se flere stillinger på: www.centrum-personale.dk10Phoenix4c88ac24101000000000IDK_OFIR_02DKDanmark228DKK2019-12-23T00:00:000000https://centrum-personale.dk/ledige-stillinger/ingeniorer/ledig-stilling/?refid=674-34860EuropaDanmarkSjælland & øerStorkøbenhavnGlostrupEuropaDanmarkSjælland & øerStorkøbenhavnAlbertslundEuropaDanmarkSjælland & øerStorkøbenhavnBrøndby3658986Centrum Personale A/S11Ikke oplyst2600GlostrupDKDanmarkORS/4c88ac24_logo.pngORS/Small/4c88ac24_logo.png0DKDanmarkDanmark8Fuldtid46Permanent1857976PhoenixMedium2019112500119-11-20191https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=4c88ac24https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=4c88ac24https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=4c88ac24&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=4c88ac24&page=EmailApplyForm&component=SendApplicationButtonhttps://static.matchwork.com/company/logo/DK/ORS/SoMe/IT_Ingenioer_og_energi/Ingenioer_og_naturvidenskab/1.jpgProjektering af industrielle pumpeløsninger12008001Dansk3Læse/ tale214501Maskiningeniør214504Maskinmester311940Ingeniør20Ingeniør og naturvidenskab28Industri29Energi363576873tln@centrum-personale.dkDanmarkDanmark330185437Scanpeople is looking for Industrial Field Service Engineers on behalf of Alfa Laval NordicRobot Our Costumer, Alfa Laval Nordic, is looking for new Field Service Engineers, with a solid knowledge within automation and process optimization combined with a good mechanical understanding. The job entails support and problem-solving on customer sites in Denmark, which will include much travel- activity. You will primarily work with our rotating equipment decanters and high-speed separators. Your focus in the job is providing technical support and problem solving at customer sites in Denmark. Most of the days you will go directly from your home to customer sites and back. Few days a month, you will be at the office in either Søborg or Kolding. You will primarily work with our rotating equipment decanters and high-speed separators, and your mindset is Customer first . Approx. travel time is between 100 and 160 days a year. Your main tasks: Preventive maintenance of supplied equipment and machines. Repair and service according to customer requirements. Support to customers and general technical support. Troubleshooting and adjustments to equipment and machines. Start-up and commissioning of machinery and process plants. Training of process operators at customer site Optimization of plant and equipment. Who are you? You have a technical background as a Marine Engineer, electrician, mechanic or equivalent. You have hands-on experience with Alfa Laval products, e.g. decanters and high-speed separators. You have good mechanical understanding and minimum 5 years experience as a field service engineer. You have good knowledge and experience in automation and control systems. You are proficient in Microsoft Office. You speak and write Danish and English. What s in it for you? We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval s future success. APPLICATION We are looking to occupy the job as soon as possible and will be booking job interviews continuously. We are waiting for the right candidate, but you should send your application today rather than tomorrow.Apply for the job, by clicking at the link below. Then register your profile and upload your resume and application. If you re already registered in our database, you can simply add the job-code 10648 to your profile.http: www.scanpeople.axp.dk index.php?axp_act adetails version 1 axp_recruitment_references[] 10648? For more information, please contact Flemming Juliussen by phone: ( 45) 43 31 00 71. If you know anyone in your network who might be interested in the vacancy, please have them contact us. About Alfa Laval Alfa Laval is today a world leader within the key technology areas of heat transfer, separation and fluid handling. Our company was founded on a single brilliant invention and innovation remains at the heart of everything we do. With more than 2500 patents, we provide worldwide solutions in areas that are vital to society both today and for the future. For more information please visit www.alfalaval.com. About ScanPeople ScanPeople is a young and dynamic Danish company in the Scanavo group. We are specialised in hiring staff on behalf of industrial, medical, and technical companies, and one of our strengths are the employee s much differentiated backgrounds. Together, the employees of ScanPeople have more than 25 years of experience with temporary hires, search and recruitment. You can read more about ScanPeople at www.scanpeople.dk Should this vacancy not be the right match for you, you are welcome to follow us on LinkedIn or Facebook where all our job listings are posted.

Our Costumer, Alfa Laval Nordic, is looking for new Field Service Engineers, with a solid knowledge within automation and process optimization combined with a good mechanical understanding. The job entails support and problem-solving on customer sites in Denmark, which will include much travel- activity. You will primarily work with our rotating equipment decanters and high-speed separators.

Your focus in the job is providing technical support and problem solving at customer sites in Denmark.  Most of the days you will go directly from your home to customer sites and back. Few days a month, you will be at the office in either Søborg or Kolding. You will primarily work with our rotating equipment decanters and high-speed separators, and your mindset is “Customer first”. Approx. travel time is between 100 and 160 days a year.

Your main tasks:

  • Preventive maintenance of supplied equipment and machines.
  • Repair and service according to customer requirements.
  • Support to customers and general technical support.
  • Troubleshooting and adjustments to equipment and machines.
  • Start-up and commissioning of machinery and process plants.
  • Training of process operators at customer site
  • Optimization of plant and equipment.

Who are you?

  • You have a technical background as a Marine Engineer, electrician, mechanic or equivalent.
  • You have hands-on experience with Alfa Laval products, e.g. decanters and high-speed separators.
  • You have good mechanical understanding and minimum 5 years’ experience as a field service engineer.
  • You have good knowledge and experience in automation and control systems.
  • You are proficient in Microsoft Office.
  • You speak and write Danish and English.

What’s in it for you? We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success.

APPLICATION

We are looking to occupy the job as soon as possible and will be booking job interviews continuously. We are waiting for the right candidate, but you should send your application today rather than tomorrow.Apply for the job, by clicking at the link below. Then register your profile and upload your resume and application. If you’re already registered in our database, you can simply add the job-code 10648 to your profile.http://www.scanpeople.axp.dk/index.php?axp_act=adetails&version=1&axp_recruitment_references[]=10648?

– For more information, please contact Flemming Juliussen by phone: (+45) 43 31 00 71. If you know anyone in your network who might be interested in the vacancy, please have them contact us.

About Alfa Laval Alfa Laval is today a world leader within the key technology areas of heat transfer, separation and fluid handling. Our company was founded on a single brilliant invention and innovation remains at the heart of everything we do.

With more than 2500 patents, we provide worldwide solutions in areas that are vital to society both today and for the future. For more information please visit www.alfalaval.com.

About ScanPeople ScanPeople is a young and dynamic Danish company in the Scanavo group. We are specialised in hiring staff on behalf of industrial, medical, and technical companies, and one of our strengths are the employee’s much differentiated backgrounds. Together, the employees of ScanPeople have more than 25 years of experience with temporary hires, search and recruitment.

You can read more about ScanPeople at www.scanpeople.dk

Should this vacancy not be the right match for you, you are welcome to follow us on LinkedIn or Facebook – where all our job listings are posted.

SCANPEOPLE ApSTaastrup2020-02-19T00:00:002020-02-26T00:00:00
330193440Scanpeople is looking for Industrial Field Service Engineers on behalf of Alfa Laval NordicRobot Our Costumer, Alfa Laval Nordic, is looking for new Field Service Engineers, with a solid knowledge within automation and process optimization combined with a good mechanical understanding. The job entails support and problem-solving on customer sites in Denmark, which will include much travel- activity. You will primarily work with our rotating equipment decanters and high-speed separators. Your focus in the job is providing technical support and problem solving at customer sites in Denmark. Most of the days you will go directly from your home to customer sites and back. Few days a month, you will be at the office in either Søborg or Kolding. You will primarily work with our rotating equipment decanters and high-speed separators, and your mindset is Customer first . Approx. travel time is between 100 and 160 days a year. Your main tasks: Preventive maintenance of supplied equipment and machines. Repair and service according to customer requirements. Support to customers and general technical support. Troubleshooting and adjustments to equipment and machines. Start-up and commissioning of machinery and process plants. Training of process operators at customer site Optimization of plant and equipment. Who are you? You have a technical background as a Marine Engineer, electrician, mechanic or equivalent. You have hands-on experience with Alfa Laval products, e.g. decanters and high-speed separators. You have good mechanical understanding and minimum 5 years experience as a field service engineer. You have good knowledge and experience in automation and control systems. You are proficient in Microsoft Office. You speak and write Danish and English. What s in it for you? We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval s future success. APPLICATION We are looking to occupy the job as soon as possible and will be booking job interviews continuously. We are waiting for the right candidate, but you should send your application today rather than tomorrow.Apply for the job, by clicking at the link below. Then register your profile and upload your resume and application. If you re already registered in our database, you can simply add the job-code 10648 to your profile.http: www.scanpeople.axp.dk index.php?axp_act adetails version 1 axp_recruitment_references[] 10648? For more information, please contact Flemming Juliussen by phone: ( 45) 43 31 00 71. If you know anyone in your network who might be interested in the vacancy, please have them contact us. About Alfa Laval Alfa Laval is today a world leader within the key technology areas of heat transfer, separation and fluid handling. Our company was founded on a single brilliant invention and innovation remains at the heart of everything we do. With more than 2500 patents, we provide worldwide solutions in areas that are vital to society both today and for the future. For more information please visit www.alfalaval.com. About ScanPeople ScanPeople is a young and dynamic Danish company in the Scanavo group. We are specialised in hiring staff on behalf of industrial, medical, and technical companies, and one of our strengths are the employee s much differentiated backgrounds. Together, the employees of ScanPeople have more than 25 years of experience with temporary hires, search and recruitment. You can read more about ScanPeople at www.scanpeople.dk Should this vacancy not be the right match for you, you are welcome to follow us on LinkedIn or Facebook where all our job listings are posted.

Our Costumer, Alfa Laval Nordic, is looking for new Field Service Engineers, with a solid knowledge within automation and process optimization combined with a good mechanical understanding. The job entails support and problem-solving on customer sites in Denmark, which will include much travel- activity. You will primarily work with our rotating equipment decanters and high-speed separators.

Your focus in the job is providing technical support and problem solving at customer sites in Denmark.  Most of the days you will go directly from your home to customer sites and back. Few days a month, you will be at the office in either Søborg or Kolding. You will primarily work with our rotating equipment decanters and high-speed separators, and your mindset is “Customer first”. Approx. travel time is between 100 and 160 days a year.

Your main tasks:

  • Preventive maintenance of supplied equipment and machines.
  • Repair and service according to customer requirements.
  • Support to customers and general technical support.
  • Troubleshooting and adjustments to equipment and machines.
  • Start-up and commissioning of machinery and process plants.
  • Training of process operators at customer site
  • Optimization of plant and equipment.

Who are you?

  • You have a technical background as a Marine Engineer, electrician, mechanic or equivalent.
  • You have hands-on experience with Alfa Laval products, e.g. decanters and high-speed separators.
  • You have good mechanical understanding and minimum 5 years’ experience as a field service engineer.
  • You have good knowledge and experience in automation and control systems.
  • You are proficient in Microsoft Office.
  • You speak and write Danish and English.

What’s in it for you? We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success.

APPLICATION

We are looking to occupy the job as soon as possible and will be booking job interviews continuously. We are waiting for the right candidate, but you should send your application today rather than tomorrow.Apply for the job, by clicking at the link below. Then register your profile and upload your resume and application. If you’re already registered in our database, you can simply add the job-code 10648 to your profile.http://www.scanpeople.axp.dk/index.php?axp_act=adetails&version=1&axp_recruitment_references[]=10648?

– For more information, please contact Flemming Juliussen by phone: (+45) 43 31 00 71. If you know anyone in your network who might be interested in the vacancy, please have them contact us.

About Alfa Laval Alfa Laval is today a world leader within the key technology areas of heat transfer, separation and fluid handling. Our company was founded on a single brilliant invention and innovation remains at the heart of everything we do.

With more than 2500 patents, we provide worldwide solutions in areas that are vital to society both today and for the future. For more information please visit www.alfalaval.com.

About ScanPeople ScanPeople is a young and dynamic Danish company in the Scanavo group. We are specialised in hiring staff on behalf of industrial, medical, and technical companies, and one of our strengths are the employee’s much differentiated backgrounds. Together, the employees of ScanPeople have more than 25 years of experience with temporary hires, search and recruitment.

You can read more about ScanPeople at www.scanpeople.dk

Should this vacancy not be the right match for you, you are welcome to follow us on LinkedIn or Facebook – where all our job listings are posted.

SCANPEOPLE ApSTaastrup2020-02-25T00:00:002020-03-04T00:00:00
330192185Teknisk Produktansvarlig til LuftfartsindustrienRobot Kunne du tænke dig en stilling som teknisk nøgleperson og være bindeled mellem salg, kunder, teknik, service og produktion? Vil du være en del af et teknisk stærkt og høj kompetent team, som varetager en hel unik produktportefølje i et internationalt miljø med leverancer til luftfartsindustrien World Wide? Historien om Vestergaard Company A S Vehicle Specialist - Equipment Manufacturer Vestergaard Company er et familieejet produktionsselskab med hovedsæde beliggende i Lejre, Roskilde ca. 50 km fra København. Bortset fra Danmark har Vestergaard Company også kontorer produktionsfaciliteter i Nordamerika, Thailand og Frankrig. Som svar på markedets krav er Vestergaard vokset betydeligt de seneste år og beskæftiger nu ca. 380 mennesker til at støtte kundernes behov på verdensplan. Vores produkter udgør Elephant familien af Aircraft ??deicers, toilet og vand service køretøjer, samt flyvaskere. Mere end 2.200 aircraft deicers og 600 toilet- vand service units er produceret i Danmark de seneste 50 år. Virksomheden har mere end 50 års erfaring i fremstilling af GSE-udstyr af høj kvalitet Læs mere på www.vestergaardcompany.com Om rollen Rollen som produktansvarlig er placeret i Technical Division, og nærmere bestemt i Project Engineering afdelingen, som består af 9 personer. Afdelingen varetager den fortsatte udvikling og produktoptimering af Vestergaards produkter samt sikring af, at produkterne til enhver tid lever op til kravspecifikationerne og Vestergaards høje kvalitetsstandarder. Der ydes teknisk support for salg, kunder, teknik, logistik, produktion og service, med andre ord bliver du en vigtig kapacitet i forhold til hele værdikæden. Der arbejdes tæt sammen med salgsorganisationen, i forhold til teknisk support og deltagelse i tekniske besvarelser blandt andet ved udbudsmaterialer. Du vil være med fra starten af et projekt, til test af det færdige produkt og aflevering til kunden. Der må forventes rejseaktivitet omkring 10-15 dage årlig, af ca. 2-3 dages varighed, primært i Europa med aflevering af produkter og igangsættelse undervisning. Dine ansvarsområder og arbejdsopgaver er følgende Sikre optimering af Vestergaards eksisterende produkterProduktforbedringer, ideudvikling og optimering af produkter (vi lytter til vores kunders ønsker)Stort teknisk overblik (mekanisk hydraulisk elektrisk) over produkterne og deres optioner, så der hurtigt kan tilpasses til kundernes specielle behov.Teknisk projektlederrolle i kundeprojekterne (store som små) dette foregår i tæt samarbejde med vores projektkoordinatorerSikring af vores høje kvalitet og at produkterne har de funktioner som er beskrevet i kravspecifikationenIndgå i udarbejdelsen af udbudsmaterialer, tilbudsgivning, tekniske beskrivelser i fabrikations specifikationerSparringspartner for øvrige medarbejdere i teknisk afdelingGenerelt vil du med tiden blive point of first contact i forhold til teknisk indsigt og viden om produkterneYde teknisk support til salg, blandt andet ved tekniske beskrivelser af produkter og optionerYde teknisk support til serviceafdelingen og produktionenDen produktansvarlige vil efter behov blive inddraget i teknisk kundesupport og undervisningUdføre final check out test inden leveringDu deltager i kundemøder og ved afleveringer til vores kunderBidrage med teknisk viden og ressourcer ved udviklingsprojekterDu har en solid teknisk baggrund gerne fra produktionsvirksomhedDu er teknisk velfunderet med uddannelse som ingeniør med fokus på enten den mekaniske hydrauliske del eller som stærk- og eller svagstrøm ingeniørDu har min. 5 års erfaring, gerne mereDu har evt. erfaring fra sammenlignelige brancher, fx Lastbiler, landbrugsmaskiner eller anden mekanisk el-teknisk hydraulisk produktionDu har erfaring med projektlederrollen i et komplekst miljøDu har gode engelske og evt. tyske sprogfærdigheder, og er en haj til IT-systemer, herunder specielt ExcelDu har forretningsforståelse og kan begå dig kommercielt i kundemødeDu tager ejerskab og ansvar for dine opgaver, arbejder selvstændigt med lyst til sparring med dygtige medarbejdereDu kan have mange bolde i luften samtidigt, og er en god afslutter.Da Vestergaard Companys produkter er komplekse og ofte kundespecifikke, er det vigtigt, at du kan arbejde og tænke selvstændig, samt at du forholder dig konstruktivt til opgaverne. Du har en struktureret, systematisk tilgang til dit arbejde samt stor datadisciplin. Du sætter en ære i god opfølgning, deltager aktivt og positivt i teamets udvikling, såvel som i dit eget arbejde. Som person er du inkluderende, omgængelig og hjælpsom, du trives med korte deadlines, samtidig er du omstillingsparat og kan håndtere, at der jævnligt sker ændringer også i sidste øjeblik. Du vil blive grundigt introduceret til vores produkter, og du må forvente en stejl læringskurve. Virksomheden tilbyder dig Vi tilbyder en meget selvstændig og vigtig rolle i en produktionsvirksomhed der består af i alt 380 medarbejdere. Du har stor mulighed for selv at bidrage til udviklingen i en vækstvirksomhed, hvor modning af forretningsgange og processer ofte kommer i spil. Det gælder inden for dit område men også i samspil med dine interessenter i en hverdag hvor der er en hands-on tilgang, med kort vej fra beslutning til handling. Ansøgning og kontakt Er du interesseret i stillingen, så send venligst din ansøgning og dit CV via linket nedenfor. Vi afholder løbende samtaler med egnede kandidater til stillingen, da den skal besættes snarest muligt. Stillingen kan derfor potentielt blive besat før ansøgningsfristens udløb vi venter dog gerne på den rigtige kandidat. BEM RK: Vi kan desværre ikke håndtere ansøgninger sendt pr. alm. mail eller via sociale medier. Har du spørgsmål til stillingen kan du kontakte Dorthe Majbrit Bonnicksen fra DeZignated ApS på telefon 45 2715 4303, som varetager rekrutteringsprocessen i samarbejde med Vestergaard Company A S. Vi ser frem til at høre fra dig.Kunne du tænke dig en stilling som teknisk nøgleperson og være bindeled mellem salg, kunder, teknik, service og produktion? Vil du være en del af et teknisk stærkt og høj kompetent team, som varetager en hel unik produktportefølje i et internationalt miljø med leverancer til luftfartsindustrien World Wide?

Historien om Vestergaard Company A/S – Vehicle Specialist - Equipment Manufacturer
Vestergaard Company er et familieejet produktionsselskab med hovedsæde beliggende i Lejre, Roskilde ca. 50 km fra København. Bortset fra Danmark har Vestergaard Company også kontorer / produktionsfaciliteter i Nordamerika, Thailand og Frankrig. Som svar på markedets krav er Vestergaard vokset betydeligt de seneste år og beskæftiger nu ca. 380 mennesker til at støtte kundernes behov på verdensplan. Vores produkter udgør Elephant® familien af Aircraft ??deicers, toilet og vand service køretøjer, samt flyvaskere. Mere end 2.200 aircraft deicers og 600 toilet- / vand service units er produceret i Danmark de seneste 50 år. Virksomheden har mere end 50 års erfaring i fremstilling af GSE-udstyr af høj kvalitet
Læs mere på www.vestergaardcompany.com

Om rollen
Rollen som produktansvarlig er placeret i Technical Division, og nærmere bestemt i Project Engineering afdelingen, som består af 9 personer. Afdelingen varetager den fortsatte udvikling og produktoptimering af Vestergaards produkter samt sikring af, at produkterne til enhver tid lever op til kravspecifikationerne og Vestergaards høje kvalitetsstandarder. Der ydes teknisk support for salg, kunder, teknik, logistik, produktion og service, med andre ord bliver du en vigtig kapacitet i forhold til hele værdikæden. Der arbejdes tæt sammen med salgsorganisationen, i forhold til teknisk support og deltagelse i tekniske besvarelser blandt andet ved udbudsmaterialer. Du vil være med fra starten af et projekt, til test af det færdige produkt og aflevering til kunden. Der må forventes rejseaktivitet omkring 10-15 dage årlig, af ca. 2-3 dages varighed, primært i Europa med aflevering af produkter og igangsættelse/undervisning.

Dine ansvarsområder og arbejdsopgaver er følgende
 
  • Sikre optimering af Vestergaards eksisterende produkter
  • Produktforbedringer, ideudvikling og optimering af produkter (vi lytter til vores kunders ønsker)
  • Stort teknisk overblik (mekanisk/hydraulisk/ elektrisk) over produkterne og deres optioner, så der hurtigt kan tilpasses til kundernes specielle behov.
  • Teknisk projektlederrolle i kundeprojekterne (store som små) dette foregår i tæt samarbejde med vores projektkoordinatorer
  • Sikring af vores høje kvalitet og at produkterne har de funktioner som er beskrevet i kravspecifikationen
  • Indgå i udarbejdelsen af udbudsmaterialer, tilbudsgivning, tekniske beskrivelser i fabrikations specifikationer
  • Sparringspartner for øvrige medarbejdere i teknisk afdeling
  • Generelt vil du med tiden blive point of first contact i forhold til teknisk indsigt og viden om produkterne
  • Yde teknisk support til salg, blandt andet ved tekniske beskrivelser af produkter og optioner
  • Yde teknisk support til serviceafdelingen og produktionen
  • Den produktansvarlige vil efter behov blive inddraget i teknisk kundesupport og undervisning
  • Udføre final check out test – inden levering
  • Du deltager i kundemøder og ved afleveringer til vores kunder
  • Bidrage med teknisk viden og ressourcer ved udviklingsprojekter
Du har en solid teknisk baggrund gerne fra produktionsvirksomhed
  • Du er teknisk velfunderet med uddannelse som ingeniør med fokus på enten den mekaniske / hydrauliske del eller som stærk- og/eller svagstrøm ingeniør
  • Du har min. 5 års erfaring, gerne mere
  • Du har evt. erfaring fra sammenlignelige brancher, fx Lastbiler, landbrugsmaskiner eller anden mekanisk/el-teknisk/hydraulisk produktion
  • Du har erfaring med projektlederrollen i et komplekst miljø
  • Du har gode engelske og evt. tyske sprogfærdigheder, og er en haj til IT-systemer, herunder specielt Excel
  • Du har forretningsforståelse og kan begå dig kommercielt i kundemøde
  • Du tager ejerskab og ansvar for dine opgaver, arbejder selvstændigt med lyst til sparring med dygtige medarbejdere
  • Du kan have mange bolde i luften samtidigt, og er en god afslutter.
Da Vestergaard Companys produkter er komplekse og ofte kundespecifikke, er det vigtigt, at du kan arbejde og tænke selvstændig, samt at du forholder dig konstruktivt til opgaverne. Du har en struktureret, systematisk tilgang til dit arbejde samt stor datadisciplin. Du sætter en ære i god opfølgning, deltager aktivt og positivt i teamets udvikling, såvel som i dit eget arbejde. Som person er du inkluderende, omgængelig og hjælpsom, du trives med korte deadlines, samtidig er du omstillingsparat og kan håndtere, at der jævnligt sker ændringer – også i sidste øjeblik. Du vil blive grundigt introduceret til vores produkter, og du må forvente en stejl læringskurve.

Virksomheden tilbyder dig
Vi tilbyder en meget selvstændig og vigtig rolle i en produktionsvirksomhed der består af i alt 380 medarbejdere. Du har stor mulighed for selv at bidrage til udviklingen i en vækstvirksomhed, hvor modning af forretningsgange og processer ofte kommer i spil. Det gælder inden for dit område men også i samspil med dine interessenter i en hverdag hvor der er en hands-on tilgang, med kort vej fra beslutning til handling.

Ansøgning og kontakt
Er du interesseret i stillingen, så send venligst din ansøgning og dit CV via linket nedenfor. Vi afholder løbende samtaler med egnede kandidater til stillingen, da den skal besættes snarest muligt. Stillingen kan derfor potentielt blive besat før ansøgningsfristens udløb – vi venter dog gerne på den rigtige kandidat. BEMÆRK: Vi kan desværre ikke håndtere ansøgninger sendt pr. alm. mail eller via sociale medier. Har du spørgsmål til stillingen kan du kontakte Dorthe Majbrit Bonnicksen fra DeZignated ApS på telefon +45 2715 4303, som varetager rekrutteringsprocessen i samarbejde med Vestergaard Company A/S.  Vi ser frem til at høre fra dig.  
 

 

DeZignated ApSKøbenhavn S2020-02-22T00:00:002020-04-07T00:00:00
330183205Mechanical Engineer for Instrument DevelopmentRobot At JJ X-Ray, we share a passion for developing mechanical instruments that will facilitate ground-breaking research results in synchrotron radiation and neutron scattering communities and Big Science Facilities all over the world. We are dedicated to deliver absolute state-of-the-art scientific instrumentation along with great design of all our products. The Hamburg Centre for Ultrafast Imaging (CUI), photographer Peter GartenJJ X-Ray are in a strategic, solid growth and the order portfolio is increasing. Accordingly, we are looking for one more mechanical engineer to our talented team consisting of 13 highly skilled and innovative engineers, physicists and technicians. They are looking forward to welcome one more gifted colleague, who will bring new ways of thinking to our company.Design at a high levelOver the years, our product portfolio has expanded significantly in close collaboration with our expert customers and through our own R D projects. You will have an important role in this development including: Mechanical design and construction of instruments with extremely fine tolerances and motions. Nano-scale resolution as well as moving mechanics under extreme conditions such as ultra high vacuum, high head load and radiation environments Project contributor throughout the project from public tenders to design and manufacturing, test and delivery Direct communication with costumers through design meetings and through writing of technical reports, descriptions and documentation Mechanical Engineer with at creative and analytic mindset Mechanical engineer Experience with 3D mechanical design in Inventor or similar 3D design program Experience with the design of moving mechanical systems Experience with Finite Element Methods, both mechanical and thermal, preferably also with vibrations. We use ANSYS or COMSOL English at a high level. On the personal level, we expect that you are excited about working with advanced mechanical systems in the forefront of the technical development and that you master complex constructions and processes. In addition to this, you strive for high quality, take responsibility for the process and work hard to meet deadlines.The external company language is English so a proficiency in written and spoken English is required. The internal language is both Danish and English, so there is no requirement to master Danish.For the right applicant, this is an extremely exciting position with possibilities for both professional and personal development.JJ X-Ray offer:A work environment involving everyone in the projects from start to the end and with a focus on helping each other for the optimal progress.A company that also offer a healthy and attractive environment where you are able to plan your everyday work. Are you inspired of jogging, walking or a mountain bike tour in the beautiful surroundings you are free to do that. We offer freedom with responsibility

At JJ X-Ray, we share a passion for developing mechanical instruments that will facilitate ground-breaking research results in synchrotron radiation and neutron scattering communities and Big Science Facilities all over the world. We are dedicated to deliver absolute state-of-the-art scientific instrumentation along with great design of all our products. 

© The Hamburg Centre for Ultrafast Imaging (CUI), photographer Peter Garten
JJ X-Ray are in a strategic, solid growth and the order portfolio is increasing. Accordingly, we are looking for one more mechanical engineer to our talented team – consisting of 13 highly skilled and innovative engineers, physicists and technicians. They are looking forward to welcome one more gifted colleague, who will bring new ways of thinking to our company.
Design at a high level
Over the years, our product portfolio has expanded significantly in close collaboration with our expert customers and through our own R&D projects. You will have an important role in this development including:
• Mechanical design and construction of instruments with extremely fine tolerances and motions. Nano-scale resolution as well as moving mechanics under extreme conditions such as ultra high vacuum, high head load and radiation environments
• Project contributor throughout the project from public tenders to design and manufacturing, test and delivery
• Direct communication with costumers through design meetings and through writing of technical reports, descriptions and documentation

Mechanical Engineer with at creative and analytic mindset
• Mechanical engineer
• Experience with 3D mechanical design in Inventor or similar 3D design program
• Experience with the design of moving mechanical systems
• Experience with Finite Element Methods, both mechanical and thermal, preferably also with vibrations. We use ANSYS or COMSOL
• English at a high level.
On the personal level, we expect that you are excited about working with advanced mechanical systems in the forefront of the technical development and that you master complex constructions and processes. In addition to this, you strive for high quality, take responsibility for the process and work hard to meet deadlines.
The external company language is English so a proficiency in written and spoken English is required. The internal language is both Danish and English, so there is no requirement to master Danish.
For the right applicant, this is an extremely exciting position with possibilities for both professional and personal development.
JJ X-Ray offer:
A work environment involving everyone in the projects from start to the end and with a focus on helping each other for the optimal progress.
A company that also offer a healthy and attractive environment where you are able to plan your everyday work. Are you inspired of jogging, walking or a mountain bike tour in the beautiful surroundings – you are free to do that. We offer freedom with responsibility

TEKNIK BUREAUET ApSKgs. Lyngby2020-02-18T00:00:002020-03-26T00:00:00
330183043NPI-ENGINEER with analytical flair and a broad technical knowledgeRobot Stillingsbeskrivelse:You will be part of a unique development company with a dedicated startup culture where mutual respect for each other s competencies are a must and you will have your own impact on this exciting position.You will join the company in an exciting time, where the printer is production matured and the production will start. Your mission will be to optimize the production process and make the product ready for mass production. In combination with the Engineering and Manufacturing Manager you will work hands-on with a wide range of technical challenges and tasks, such as changes in production, production documentation and quality control. At the same time, you will analyze and solve a range of complex problems both large and small either on you own or in close collaboration with the team. During your daily work you will see possible production improvements, optimizations and cost reductions which you will implement ongoing. You will have a central role with regards to handling Engineering Change Requests orders (ECR ECO) with subsequent implementation in the production.You will quickly be the go-to person, the specialist and the trouble-shooter - and will be one of the most knowledgeable regarding the production developments and challenges of the product. You will be responsible for securing that the equipment is produced and reflects the existing quality standards and cost calculations. You will constantly be part of developing the equipment from your own analyses and input from the organization and stakeholders.There will be travel for 20-25 nights per annum (EMEA) in relation to the company s sub suppliers, where a big part of the production of printers are outsourced. You will work in close collaboration with the local engineers which you will be sparring with and guiding regarding technical issues. Production and maintenance of technical documentation will be a natural part of your work as well as managing the sub suppliers regarding reaching the target on quality, costs and time plans.The company is rapidly developing, and you will therefore be part of building up different analysis tools and systems, and you will contribute in all the new projects and put your mark on them.Virksomhedsbeskrivelse:XAAR3D, owned by Xaar PLC (55 ) and Stratasys (45 ), is an exciting company which has developed and produced a high technology product for 3D print with a technique unique for this field. In 2003 Niel Hopkinson created and described the 3D print technology - High Speed Sintering (HSS), where printer heads were used to print infrared absorbing color on powder materials.In 2018 XAAR3D separated from the mother company in Cambridge, England and was founded as an independent company to embrace the rapid grooving marked for industrial 3D printers. You can print in many different materials in high resolution and with great accuracy.Today the company consist of a unique team specially chosen - with dedicated employees with huge experience within 3D print. The Danish Department XAAR3D ApS is responsible for product development, validation, production and support.The dynamic and dedicated start-up culture has been kept with plenty of room to work and a short decision-making process. The Company has the ambition to be amongst the best within it s field and this will happen by attracting and developing the best and most competent employees. If you wish to be a part of this exciting journey this position could be the one for you.If you have any questions you are welcome to contact Profilpartners on telephone 4343 4060. Arbejdssted:Copenhagen Southwest Du tilbydes:The possibility of an exciting journey in a dynamic development company in rapid expansion, and you will have plenty of opportunities to contribute with your competencies and knowledge in this position.Qualifications Løn:Your salary will reflect your qualifications Egenskaber:You are practical and analytical with a flair for details, you are persistent with a strong overview and can handle busy situations in a calm and professional manner. You are flexible and willing to contribute with your competencies where possible. Erhvervserfaring:It would be optimal if you have experience from a similar position where you have handled many different technical challenges and it would be an advantage if you have experience with machinery. Uddannelser:You are a qualified mechanical engineer, production technologist or other relevant qualification. Sprogkundskaber IT:You are fluent in English in writing and speech and preferably Danish, and you have strong experience with IT and user of CAD Software

Stillingsbeskrivelse:
You will be part of a unique development company with a dedicated startup culture where mutual respect for each other’s competencies are a must and you will have your own impact on this exciting position.
You will join the company in an exciting time, where the printer is production matured and the production will start. Your mission will be to optimize the production process and make the product ready for mass production. In combination with the Engineering and Manufacturing Manager you will work hands-on with a wide range of technical challenges and tasks, such as changes in production, production documentation and quality control. At the same time, you will analyze and solve a range of complex problems both large and small either on you own or in close collaboration with the team. During your daily work you will see possible production improvements, optimizations and cost reductions which you will implement ongoing. You will have a central role with regards to handling Engineering Change Requests/orders (ECR/ECO) with subsequent implementation in the production.
You will quickly be the go-to person, the specialist and the trouble-shooter - and will be one of the most knowledgeable regarding the production developments and challenges of the product. You will be responsible for securing that the equipment is produced and reflects the existing quality standards and cost calculations. You will constantly be part of developing the equipment from your own analyses and input from the organization and stakeholders.
There will be travel for 20-25 nights per annum (EMEA) in relation to the company’s sub suppliers, where a big part of the production of printers are outsourced. You will work in close collaboration with the local engineers which you will be sparring with and guiding regarding technical issues. Production and maintenance of technical documentation will be a natural part of your work as well as managing the sub suppliers regarding reaching the target on quality, costs and time plans.

The company is rapidly developing, and you will therefore be part of building up different analysis tools and systems, and you will contribute in all the new projects and put your mark on them.

Virksomhedsbeskrivelse:
XAAR3D, owned by Xaar PLC (55%) and Stratasys (45%), is an exciting company which has developed and produced a high technology product for 3D print with a technique unique for this field. In 2003 Niel Hopkinson created and described the 3D print technology - High Speed Sintering (HSS), where printer heads were used to print infrared absorbing color on powder materials.
In 2018 XAAR3D separated from the mother company in Cambridge, England and was founded as an independent company to embrace the rapid grooving marked for industrial 3D printers. You can print in many different materials in high resolution and with great accuracy.
Today the company consist of a unique team – specially chosen - with dedicated employees with huge experience within 3D print. The Danish Department XAAR3D ApS is responsible for product development, validation, production and support.

The dynamic and dedicated start-up culture has been kept with plenty of room to work and a short decision-making process. The Company has the ambition to be amongst the best within it’s field and this will happen by attracting and developing the best and most competent employees. If you wish to be a part of this exciting journey this position could be the one for you.
If you have any questions you are welcome to contact Profilpartners on telephone 4343 4060.

Arbejdssted:
Copenhagen Southwest

Du tilbydes:
The possibility of an exciting journey in a dynamic development company in rapid expansion, and you will have plenty of opportunities to contribute with your competencies and knowledge in this position.
Qualifications

Løn:
Your salary will reflect your qualifications

Egenskaber:
You are practical and analytical with a flair for details, you are persistent with a strong overview and can handle busy situations in a calm and professional manner. You are flexible and willing to contribute with your competencies where possible.

Erhvervserfaring:
It would be optimal if you have experience from a similar position where you have handled many different technical challenges and it would be an advantage if you have experience with machinery.

Uddannelser:
You are a qualified mechanical engineer, production technologist or other relevant qualification.

Sprogkundskaber / IT:
You are fluent in English in writing and speech and preferably Danish, and you have strong experience with IT and user of CAD Software

PROFILPARTNERS ApSBirkerød2020-02-18T00:00:002020-03-19T00:00:00
da-DK

Andre job der matcher din søgning

Scanpeople is looking for Industrial Field Service Engineers on behalf of Alfa Laval Nordic

SCANPEOPLE ApS

Taastrup
Our Costumer, Alfa Laval Nordic, is looking for new Field Service Engineers, with a solid knowledge within automation and process optimization combined with a good mechanical understanding. The job entails support and problem-solving on customer sit...
Indrykket:19. februar 2020

Scanpeople is looking for Industrial Field Service Engineers on behalf of Alfa Laval Nordic

SCANPEOPLE ApS

Taastrup
Our Costumer, Alfa Laval Nordic, is looking for new Field Service Engineers, with a solid knowledge within automation and process optimization combined with a good mechanical understanding. The job entails support and problem-solving on customer sit...
Indrykket:25. februar 2020

Teknisk Produktansvarlig til Luftfartsindustrien

DeZignated ApS

København S
Kunne du tænke dig en stilling som teknisk nøgleperson og være bindeled mellem salg, kunder, teknik, service og produktion? Vil du være en del af et teknisk stærkt og høj kompetent team, som varetager en hel unik produktportefølje i et international...
Indrykket:22. februar 2020

Mechanical Engineer for Instrument Development

TEKNIK BUREAUET ApS

Kgs. Lyngby
At JJ X-Ray, we share a passion for developing mechanical instruments that will facilitate ground-breaking research results in synchrotron radiation and neutron scattering communities and Big Science Facilities all over the world. We are dedicated t...
Indrykket:18. februar 2020

NPI-ENGINEER with analytical flair and a broad technical knowledge

PROFILPARTNERS ApS

Birkerød
Stillingsbeskrivelse:You will be part of a unique development company with a dedicated startup culture where mutual respect for each other s competencies are a must and you will have your own impact on this exciting position.You will join the compan...
Indrykket:18. februar 2020