Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

ScanPeople søger en maskiningeniør til Westrup A/S

ScanPeople søger maskiningeniør til Westrup A/S

Westrup A/S er i gang med spændende og seriøse udviklingsplaner, hvorfor du som team-medlem i engineering-afdelingen vil opleve en løbende udvikling, fagligt såvel som personligt, og vil være en del af drivkraften i den kontinuerlige optimering af virksomhedens produkter og produktion.
Virksomheden tegner i Inventor og bruger IFS som ERP-system.

JOBBESKRIVELSE

Din primære rolle i engineering-afdelingen bliver at sørge for, at virksomhedens produkter løbende optimeres i forhold til produktionsomkostninger, design samt input fra kunder og resten af organisationen. Derudover, vil du i mindre omfang indgå i løsningen af engineering-teamets øvrige opgaver, som består af tilpasning af produkter til kundeønsker samt support til både projekt-, udviklings- og salgsafdelingerne.

DU VIL BESKÆFTIGE DIG MED AT

  • Gennemføre produktoptimering af produktprogram
  • Optimere produktionsgrundlag for produktprogram
  • Udfordre og optimere konstruktions- og produktionsprocesser
  • Sikre, at maskiner er designet i henhold til maskindirektiv
  • Bistå med beregninger af stålkonstruktioner
  • Proaktivt understøtte afdelingen i at opfylde de til gældende KPI’er
  • Hjælpe kunder, interne såvel som eksterne, med teknisk bistand
  • Udarbejde simplified modeller
  • Udarbejde målskitser
  • Udføre kundetilpassede konstruktioner på maskiner og udstyr

KVALIFIKATIONER
Den rette kandidat til stillingen har en uddannelsesmæssig baggrund som maskiningeniør eller anden relevant uddannelse og gerne flere års praktisk erfaring fra en lignende stilling.

DEN IDEELLE KANDIDAT

  • Har erfaring med produkt- og produktionsoptimering
  • Har erfaring som Inventor-bruger med kendskab til pladebearbejdning
  • Har erfaring inden for CE-godkendelser, maskindirektiver og risikovurderinger
  • Har erfaring med Lean, Kaizen, 5S, Poka-yoke eller 6-Sigma
  • Har kendskab til kundetilpasset ordreproduktion af industrielt procesudstyr
  • Har kendskab til hydraulik, pneumatik, el-teknik samt P&I- og el-diagrammer
  • Behersker dansk og engelsk i skrift og tale (engelsk er koncernsprog)
  • Er ivrig efter at lære og udvikle sig

VIRKSOMHEDEN TILBYDER

Fastansættelse i en virksomhed med et godt arbejdsklima og en uformel omgangstone. Din dagligdag vil være i vores nye kontorbygning i Slagelse, tæt på motorvejen og kun 2 km fra stationen, lige ved siden af vores produktionsfaciliteter. Der er en god personaleforening og skøn kantine på adressen. 37 timers arbejdsuge med flex-ordning og med et minimum af rejseaktivitet.

OPSTART

Hurtigst muligt, men Vi venter på den rette kandidat. Vi kalder løbende til samtale, så send hellere din ansøgning i dag end i morgen.

ANSØGNING
Finder du ovenstående lige så spændende som os og er du klar til nye udfordringer, så er du velkommen til at sende CV og en motiveret ansøgning på mail til info@scanpeople.dk.

Venligst skriv i ansøgningen, hvor du har set annoncen.
For yderligere information, kan Christian Behrenthz Olesen fra ScanPeople kontaktes på telefon:
43 31 00 71.

Vi ser frem til at modtage din ansøgning!

OM WESTRUP
Westrup er blandt verdens førende inden for udvikling og fremstilling af maskiner og anlæg til den globale procesindustri inden for korn- og frøbehandling. Produktprogrammet indeholder udstyr fra manuelt betjente maskiner til fuldautomatiserede turnkey-anlæg, og vores ydelser dækker alt fra engineering til komplet projektansvar.

Westrup-koncernen har 135 ansatte primært i Slagelse samt en række datterselskaber, agenter og distributører fordelt over hele verden. Den primære produktion sker i Danmark suppleret af et søsterselskab i Indien. Du kan læse mere om Westrup på:

WWW.WESTRUP.COM

OM SCANPEOPLE

ScanPeople er en solid og dynamisk danskejet virksomhed i Scanavo gruppen. Vi er yderst servicemindede og kompetente rådgivere. En af ScanPeoples store styrker er medarbejdernes meget forskelligartede baggrunde. Vi besidder et vidtrækkende rekrutteringsnetværk og en bred erfaring med vikarassistance, search, rekruttering, interim management og outplacement.

Vi har med ScanPeoples blå division valgt at specialisere os i at levere personale indenfor Industri, Medico, Teknik og Pharma. Yderligere information findes på www.scanpeople.dk – Her kan du i tillæg finde ScanPeoples grønne division som er specialiseret i at levere personale indenfor Salg, Marketing, Kontor og Administration.


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

329759591Phoenix-30a09c6312018-02-12T13:01:52.567ScanPeople søger en maskiningeniør til Westrup A/S

ScanPeople søger maskiningeniør til Westrup A/S

Westrup A/S er i gang med spændende og seriøse udviklingsplaner, hvorfor du som team-medlem i engineering-afdelingen vil opleve en løbende udvikling, fagligt såvel som personligt, og vil være en del af drivkraften i den kontinuerlige optimering af virksomhedens produkter og produktion.
Virksomheden tegner i Inventor og bruger IFS som ERP-system.

JOBBESKRIVELSE

Din primære rolle i engineering-afdelingen bliver at sørge for, at virksomhedens produkter løbende optimeres i forhold til produktionsomkostninger, design samt input fra kunder og resten af organisationen. Derudover, vil du i mindre omfang indgå i løsningen af engineering-teamets øvrige opgaver, som består af tilpasning af produkter til kundeønsker samt support til både projekt-, udviklings- og salgsafdelingerne.

DU VIL BESKÆFTIGE DIG MED AT

  • Gennemføre produktoptimering af produktprogram
  • Optimere produktionsgrundlag for produktprogram
  • Udfordre og optimere konstruktions- og produktionsprocesser
  • Sikre, at maskiner er designet i henhold til maskindirektiv
  • Bistå med beregninger af stålkonstruktioner
  • Proaktivt understøtte afdelingen i at opfylde de til gældende KPI’er
  • Hjælpe kunder, interne såvel som eksterne, med teknisk bistand
  • Udarbejde simplified modeller
  • Udarbejde målskitser
  • Udføre kundetilpassede konstruktioner på maskiner og udstyr

KVALIFIKATIONER
Den rette kandidat til stillingen har en uddannelsesmæssig baggrund som maskiningeniør eller anden relevant uddannelse og gerne flere års praktisk erfaring fra en lignende stilling.

DEN IDEELLE KANDIDAT

  • Har erfaring med produkt- og produktionsoptimering
  • Har erfaring som Inventor-bruger med kendskab til pladebearbejdning
  • Har erfaring inden for CE-godkendelser, maskindirektiver og risikovurderinger
  • Har erfaring med Lean, Kaizen, 5S, Poka-yoke eller 6-Sigma
  • Har kendskab til kundetilpasset ordreproduktion af industrielt procesudstyr
  • Har kendskab til hydraulik, pneumatik, el-teknik samt P&I- og el-diagrammer
  • Behersker dansk og engelsk i skrift og tale (engelsk er koncernsprog)
  • Er ivrig efter at lære og udvikle sig

VIRKSOMHEDEN TILBYDER

Fastansættelse i en virksomhed med et godt arbejdsklima og en uformel omgangstone. Din dagligdag vil være i vores nye kontorbygning i Slagelse, tæt på motorvejen og kun 2 km fra stationen, lige ved siden af vores produktionsfaciliteter. Der er en god personaleforening og skøn kantine på adressen. 37 timers arbejdsuge med flex-ordning og med et minimum af rejseaktivitet.

OPSTART

Hurtigst muligt, men Vi venter på den rette kandidat. Vi kalder løbende til samtale, så send hellere din ansøgning i dag end i morgen.

ANSØGNING
Finder du ovenstående lige så spændende som os og er du klar til nye udfordringer, så er du velkommen til at sende CV og en motiveret ansøgning på mail til info@scanpeople.dk.

Venligst skriv i ansøgningen, hvor du har set annoncen.
For yderligere information, kan Christian Behrenthz Olesen fra ScanPeople kontaktes på telefon:
43 31 00 71.

Vi ser frem til at modtage din ansøgning!

OM WESTRUP
Westrup er blandt verdens førende inden for udvikling og fremstilling af maskiner og anlæg til den globale procesindustri inden for korn- og frøbehandling. Produktprogrammet indeholder udstyr fra manuelt betjente maskiner til fuldautomatiserede turnkey-anlæg, og vores ydelser dækker alt fra engineering til komplet projektansvar.

Westrup-koncernen har 135 ansatte primært i Slagelse samt en række datterselskaber, agenter og distributører fordelt over hele verden. Den primære produktion sker i Danmark suppleret af et søsterselskab i Indien. Du kan læse mere om Westrup på:

WWW.WESTRUP.COM

OM SCANPEOPLE

ScanPeople er en solid og dynamisk danskejet virksomhed i Scanavo gruppen. Vi er yderst servicemindede og kompetente rådgivere. En af ScanPeoples store styrker er medarbejdernes meget forskelligartede baggrunde. Vi besidder et vidtrækkende rekrutteringsnetværk og en bred erfaring med vikarassistance, search, rekruttering, interim management og outplacement.

Vi har med ScanPeoples blå division valgt at specialisere os i at levere personale indenfor Industri, Medico, Teknik og Pharma. Yderligere information findes på www.scanpeople.dk – Her kan du i tillæg finde ScanPeoples grønne division som er specialiseret i at levere personale indenfor Salg, Marketing, Kontor og Administration.

2018-02-19T14:07:24.840 ScanPeople søger maskiningeniør til Westrup A S Westrup A S er i gang med spændende og seriøse udviklingsplaner, hvorfor du som team-medlem i engineering-afdelingen vil opleve en løbende udvikling, fagligt såvel som personligt, og vil være en del af drivkraften i den kontinuerlige optimering af virksomhedens produkter og produktion. Virksomheden tegner i Inventor og bruger IFS som ERP-system. JOBBESKRIVELSE Din primære rolle i engineering-afdelingen bliver at sørge for, at virksomhedens produkter løbende optimeres i forhold til produktionsomkostninger, design samt input fra kunder og resten af organisationen. Derudover, vil du i mindre omfang indgå i løsningen af engineering-teamets øvrige opgaver, som består af tilpasning af produkter til kundeønsker samt support til både projekt-, udviklings- og salgsafdelingerne. DU VIL BESK FTIGE DIG MED AT Gennemføre produktoptimering af produktprogram Optimere produktionsgrundlag for produktprogram Udfordre og optimere konstruktions- og produktionsprocesser Sikre, at maskiner er designet i henhold til maskindirektiv Bistå med beregninger af stålkonstruktioner Proaktivt understøtte afdelingen i at opfylde de til gældende KPI er Hjælpe kunder, interne såvel som eksterne, med teknisk bistand Udarbejde simplified modeller Udarbejde målskitser Udføre kundetilpassede konstruktioner på maskiner og udstyr KVALIFIKATIONER Den rette kandidat til stillingen har en uddannelsesmæssig baggrund som maskiningeniør eller anden relevant uddannelse og gerne flere års praktisk erfaring fra en lignende stilling. DEN IDEELLE KANDIDAT Har erfaring med produkt- og produktionsoptimering Har erfaring som Inventor-bruger med kendskab til pladebearbejdning Har erfaring inden for CE-godkendelser, maskindirektiver og risikovurderinger Har erfaring med Lean, Kaizen, 5S, Poka-yoke eller 6-Sigma Har kendskab til kundetilpasset ordreproduktion af industrielt procesudstyr Har kendskab til hydraulik, pneumatik, el-teknik samt P I- og el-diagrammer Behersker dansk og engelsk i skrift og tale (engelsk er koncernsprog) Er ivrig efter at lære og udvikle sig VIRKSOMHEDEN TILBYDER Fastansættelse i en virksomhed med et godt arbejdsklima og en uformel omgangstone. Din dagligdag vil være i vores nye kontorbygning i Slagelse, tæt på motorvejen og kun 2 km fra stationen, lige ved siden af vores produktionsfaciliteter. Der er en god personaleforening og skøn kantine på adressen. 37 timers arbejdsuge med flex-ordning og med et minimum af rejseaktivitet. OPSTART Hurtigst muligt, men Vi venter på den rette kandidat. Vi kalder løbende til samtale, så send hellere din ansøgning i dag end i morgen. ANSØGNING Finder du ovenstående lige så spændende som os og er du klar til nye udfordringer, så er du velkommen til at sende CV og en motiveret ansøgning på mail til info@scanpeople.dk. Venligst skriv i ansøgningen, hvor du har set annoncen. For yderligere information, kan Christian Behrenthz Olesen fra ScanPeople kontaktes på telefon: 43 31 00 71. Vi ser frem til at modtage din ansøgning! OM WESTRUP Westrup er blandt verdens førende inden for udvikling og fremstilling af maskiner og anlæg til den globale procesindustri inden for korn- og frøbehandling. Produktprogrammet indeholder udstyr fra manuelt betjente maskiner til fuldautomatiserede turnkey-anlæg, og vores ydelser dækker alt fra engineering til komplet projektansvar. Westrup-koncernen har 135 ansatte primært i Slagelse samt en række datterselskaber, agenter og distributører fordelt over hele verden. Den primære produktion sker i Danmark suppleret af et søsterselskab i Indien. Du kan læse mere om Westrup på: WWW.WESTRUP.COM OM SCANPEOPLE ScanPeople er en solid og dynamisk danskejet virksomhed i Scanavo gruppen. Vi er yderst servicemindede og kompetente rådgivere. En af ScanPeoples store styrker er medarbejdernes meget forskelligartede baggrunde. Vi besidder et vidtrækkende rekrutteringsnetværk og en bred erfaring med vikarassistance, search, rekruttering, interim management og outplacement. Vi har med ScanPeoples blå division valgt at specialisere os i at levere personale indenfor Industri, Medico, Teknik og Pharma. Yderligere information findes på www.scanpeople.dk Her kan du i tillæg finde ScanPeoples grønne division som er specialiseret i at levere personale indenfor Salg, Marketing, Kontor og Administration.11Jobnet30a09c63100000000000IDK_OFIR_02DKDanmark228DKK2018-02-21T00:00:0000110EuropaDanmarkEuropaDanmarkSjælland & øerStorkøbenhavnHøje-Taastrup3109867SCANPEOPLE ApS11Roskildevej 3282630TaastrupDKDanmark0
info@scanpeople.dkDKDanmarkDKDanmark
8Fuldtid46Permanent524819JobNet47698321000https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=30a09c63https://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=30a09c63https://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=30a09c63&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=30a09c63&page=EmailApplyForm&component=SendApplicationButtonhttps://static-int.matchwork.com/company/logo/DK/ORS/SoMe/IT_Ingenioer_og_energi/Ingenioer_og_naturvidenskab/5.jpgØnsker du et spændende job som Maskiningeniør? Hos SCANPEOPLE ApS tilbyder vi arbejdsplads med fokus på den enkelte medarbejder.12008011Dansk3Læse/ tale214501Maskiningeniør20Ingeniør og naturvidenskab353001995Christian Behrenthz Oleseninfo@scanpeople.dkDKDanmarkDKDanmark329930873Pipe System Design EngineersRobot Description Pipe System Design Engineer Do you want to play an important role in the development of challenging offshore projects? National Oilwell Varco Subsea Production Systems (NOV SPS) designs and manufactures flexible pipes and bespoken, innovative products for the offshore oil and gas industry. Headquartered in Copenhagen, Denmark, we leverage superior engineering and state-of-the-art manufacturing technology to establish long-term partnerships with global contractors and oil companies. You will join our Pipe System Design department, where you will focus on the flexible pipe systems that are used primarily to transport oil, gas and water along the seabed and up to the connecting surface vessel. You will be based in Brøndby. Two main disciplines As a Pipe System Design Engineer, your role in a project team is typically focused on one of our two main disciplines, pipe design and system design, or a combination of both. In pipe design, we focus on the design of the flexible pipe structural layers based on temperature, pressure, water depth, external loads and type of fluid inside the pipe. You will be responsible for optimizing the cross-sectional design of the pipe using in-house and commercial simulation software modelling mechanical, chemical and thermal load scenarios. You will be a vital part of the project from the initial design phase through manufacturing and final testing. In system design, we focus on the design of the flexible pipe systems and analyzing the dynamic responses using computer simulations to describe the physics of the system. You will be responsible for optimizing the system performance by analyzing different system layouts and include all relevant inputs describing an offshore environment such as wave heights, currents, vessel motion, seabed interaction, temperature and, of course, the properties of the system s main feature, the flexible pipe. Your main tasks: Design of flexible pipe structures Detailed analysis and simulation Analyze performance for relevant scenarios Specify design and materials for production Integrate inputs into a dynamic FEA model Carry out simulations of the pipe system Optimize system layout and components Determine system interface responses Document your work in reports Communicate progress and results of analyses to Client and other relevant stakeholders Share knowledge with colleagues Participate in the development of the Pipe System Design department Qualifications Your skills and experience You hold a B.SC or M.SC degree in mechanical engineering, applied mathematics or similar You have experience with solid mechanics, material science or thermodynamics, structural dynamics, fluid dynamics and or numerical simulations Preferably you have a few years of experience from subsea engineering, oil gas, wind power or offshore constructions You can demonstrate great results from your career or study so far You speak and write English fluently Analytical team player You are a team player with a strong focus on deliverables and you understand how to apply technical information in cooperation with other engineering disciplines. You are a hard worker with a strong commitment to task and team, and when necessary you can adapt and find alternative solutions. We also expect you to be analytical and structured since you will be working with large amounts of data. Finally, it is important that you understand how to apply technical information in cooperation with other engineering disciplines. We offer An inspiring place to work with great opportunities to develop your skills and the opportunity to work with the brightest minds among flexible pipe manufacturers. You will become part of a professional offshore culture where we work together in teams with other dedicated professionals to achieve common goals. If you want to know more about the position, please contact Engineering Managers Simon Jarlgaard ( 45 4191 4721) or Bogi Laksáfoss ( 45 2963 3869). Please forward your application and CV as soon as possible since we will be conducting interviews continuously until March 1st 2019. We are truly a global family with 1300 dedicated employees in Denmark, Brazil, Ghana, Malaysia, Norway, Scotland, and the United States, and we offer the opportunity of a lifetime for anyone interested in working in an international environment to help power the industry that powers the world. Job: Engineering Schedule: Full-time Shift: Day Job

Description

 

Pipe System Design Engineer

 

Do you want to play an important role in the development of challenging offshore projects?

 

National Oilwell Varco Subsea Production Systems (NOV SPS) designs and manufactures flexible pipes and bespoken, innovative products for the offshore oil and gas industry. Headquartered in Copenhagen, Denmark, we leverage superior engineering and state-of-the-art manufacturing technology to establish long-term partnerships with global contractors and oil companies.

 

You will join our Pipe System Design department, where you will focus on the flexible pipe systems that are used primarily to transport oil, gas and water along the seabed and up to the connecting surface vessel. You will be based in Brøndby.

 

Two main disciplines

As a Pipe System Design Engineer, your role in a project team is typically focused on one of our two main disciplines, pipe design and system design, or a combination of both.

 

In pipe design, we focus on the design of the flexible pipe structural layers based on temperature, pressure, water depth, external loads and type of fluid inside the pipe. You will be responsible for optimizing the cross-sectional design of the pipe using in-house and commercial simulation software modelling mechanical, chemical and thermal load scenarios. You will be a vital part of the project from the initial design phase through manufacturing and final testing.

 

In system design, we focus on the design of the flexible pipe systems and analyzing the dynamic responses using computer simulations to describe the physics of the system. You will be responsible for optimizing the system performance by analyzing different system layouts and include all relevant inputs describing an offshore environment such as wave heights, currents, vessel motion, seabed interaction, temperature and, of course, the properties of the system’s main feature, the flexible pipe.

 

Your main tasks:

 

  • Design of flexible pipe structures
  • Detailed analysis and simulation
  • Analyze performance for relevant scenarios 
  • Specify design and materials for production
  • Integrate inputs into a dynamic FEA model
  • Carry out simulations of the pipe system
  • Optimize system layout and components
  • Determine system interface responses
  • Document your work in reports
  • Communicate progress and results of analyses to Client and other relevant stakeholders
  • Share knowledge with colleagues
  • Participate in the development of the Pipe System Design department

 

 

Qualifications

 

Your skills and experience

  • You hold a B.SC or M.SC degree in mechanical engineering, applied mathematics or similar
  • You have experience with solid mechanics, material science or thermodynamics, structural dynamics, fluid dynamics and/or numerical simulations 
  • Preferably you have a few years of experience from subsea engineering, oil & gas, wind power or offshore constructions
  • You can demonstrate great results from your career or study so far
  • You speak and write English fluently

 

Analytical team player

You are a team player with a strong focus on deliverables and you understand how to apply technical information in cooperation with other engineering disciplines. You are a hard worker with a strong commitment to task and team, and when necessary you can adapt and find alternative solutions. We also expect you to be analytical and structured since you will be working with large amounts of data. Finally, it is important that you understand how to apply technical information in cooperation with other engineering disciplines.

 

We offer

An inspiring place to work with great opportunities to develop your skills and the opportunity to work with the brightest minds among flexible pipe manufacturers. You will become part of a professional offshore culture where we work together in teams with other dedicated professionals to achieve common goals.

 

If you want to know more about the position, please contact Engineering Managers Simon Jarlgaard (+45 4191 4721) or Bogi Laksáfoss (+45 2963 3869). Please forward your application and CV as soon as possible since we will be conducting interviews continuously until March 1st 2019.

 

We are truly a global family with 1300 dedicated employees in Denmark, Brazil, Ghana, Malaysia, Norway, Scotland, and the United States, and we offer the opportunity of a lifetime for anyone interested in working in an international environment to help power the industry that powers the world.

 

Job: Engineering

Schedule: Full-time

Shift: Day Job

NATIONAL OILWELL VARCO DENMARK I/SBrøndby2018-12-19T00:00:002019-02-13T00:00:00
329941235To ingeniører søges til dekommissioneringRobot Dansk Dekommissionering har fået tilført nye arbejdsopgaver, og vi har derfor brug for flere kræfter. Vi søger nu to nye ingeniørkolleger, som skal være med til at afrense, adskille og pakke de nukleare anlæg på Risø. Som projektingeniør i DD er dine hovedopgaver at detailplanlægge opgaverne, styre og følge op på udførelsen samt dokumentere før og efter. Specialløsninger skal udvikles, men vi har efterhånden en stor værktøjskasse fra de allerede gennemførte dekommissioneringsopgaver. Dokumentationen består i at skrive både arbejdsplaner til håndværkerne og dokumenter til godkendelse hos de nukleare tilsynsmyndigheder. Udarbejdelsen vil ske i samarbejde med andre af DD s faggrupper. Projektingeniør 1 Du vil komme til at styre og koordinere enkeltopgaver alt efter behov i de forskellige dekommissioneringsprojekter. Derfor skal du have nemt ved at sætte dig ind i forskellige problemstilllinger og kunne trives med at arbejde mere bredt. I din første opgave vil du blive tilknyttet Hot Cells-projektet, som er i den udførende fase og står foran en række væsentlige beslutninger i forbindelse med den fortsatte afrensning og adskillelse af de seks celler. Du skal ud fra et teknisk perspektiv udarbejde cost-benefit-analyser af forskellige scenarier med input fra de øvrige projektingeniører. Projektingeniør 2 Du bliver en del af projektgruppen, der står for at dekommissionere vores Behandlingsstation og tilhørende lagre. Projektet er i den indledende fase. Du skal ud fra den foreliggende projektbeskrivelse være med til at detailplanlægge delopgaver, skrive arbejdsplaner og senere styre og følge op på udførelsen af opgaverne. Som din første opgave skal du være med til at planlægge den radiologiske karakterisering af anlægget, f.eks. udtagningen af prøver. Vi tilbyder Et udfordrende arbejde på en usædvanlig arbejdsplads Et varieret jobindhold med gode muligheder for kompetenceudvikling Et inspirerende og sikkert arbejdsmiljø En arbejdsplads, der er præget af tværfagligt samarbejde og en uformel tone Flekstid, gode kolleger og naturskønne omgivelser Din faglige profil Ingeniør, gerne inden for maskinretningen, eller en tilsvarende videregående teknisk uddannelse Er teknisk velfunderet Kan omsætte teori til praktiske løsninger Er god til at skrive tekniske dokumenter - til såvel håndværkere som myndigheder Stilling 1: Solid erhvervserfaring med tilsvarende arbejdsopgaver (styring, koordinering, dokumentskrivning) Stilling 2: Erhvervserfaring med tilsvarende arbejdsopgaver er en fordel, men ikke et krav. Det er ikke et krav, at du har kendskab til arbejdet med radioaktive materialer. Du vil blive oplært i den nødvendige viden og kommer i løbet af det første halve år på vores interne basisuddannelse i helsefysik. Din personlige profil Er fleksibel i din tilgang til arbejdsopgaver og forandringsparat Er god til at samarbejde, også med andre faggrupper, og lydhør over for andres input Er både idémager og afslutter Er vedholdende og tager ansvar Har øje for helheden og kan træffe beslutninger, der balancerer mellem modsat rettede parametre Ansættelsen Vi forventer at holde ansættelsessamtaler den 12., 13. og 14. februar. Ansættelsen vil ske efter overenskomst for akademikere i staten.Dansk Dekommissionering har fået tilført nye arbejdsopgaver, og vi har derfor brug for flere kræfter. Vi søger nu to nye ingeniørkolleger, som skal være med til at afrense, adskille og pakke de nukleare anlæg på Risø.

Som projektingeniør i DD er dine hovedopgaver at detailplanlægge opgaverne, styre og følge op på udførelsen samt dokumentere før og efter. Specialløsninger skal udvikles, men vi har efterhånden en stor værktøjskasse fra de allerede gennemførte dekommissioneringsopgaver. Dokumentationen består i at skrive både arbejdsplaner til håndværkerne og dokumenter til godkendelse hos de nukleare tilsynsmyndigheder. Udarbejdelsen vil ske i samarbejde med andre af DD’s faggrupper.

Projektingeniør 1
Du vil komme til at styre og koordinere enkeltopgaver alt efter behov i de forskellige dekommissioneringsprojekter. Derfor skal du have nemt ved at sætte dig ind i forskellige problemstilllinger og kunne trives med at arbejde mere bredt. I din første opgave vil du blive tilknyttet Hot Cells-projektet, som er i den udførende fase og står foran en række væsentlige beslutninger i forbindelse med den fortsatte afrensning og adskillelse af de seks celler. Du skal ud fra et teknisk perspektiv udarbejde cost-benefit-analyser af forskellige scenarier med input fra de øvrige projektingeniører.

Projektingeniør 2
Du bliver en del af projektgruppen, der står for at dekommissionere vores Behandlingsstation og tilhørende lagre. Projektet er i den indledende fase. Du skal ud fra den foreliggende projektbeskrivelse være med til at detailplanlægge delopgaver, skrive arbejdsplaner og senere styre og følge op på udførelsen af opgaverne. Som din første opgave skal du være med til at planlægge den radiologiske karakterisering af anlægget, f.eks. udtagningen af prøver.

Vi tilbyder
  • Et udfordrende arbejde på en usædvanlig arbejdsplads
  • Et varieret jobindhold med gode muligheder for kompetenceudvikling
  • Et inspirerende og sikkert arbejdsmiljø
  • En arbejdsplads, der er præget af tværfagligt samarbejde og en uformel tone
  • Flekstid, gode kolleger og naturskønne omgivelser
Din faglige profil
  • Ingeniør, gerne inden for maskinretningen, eller en tilsvarende videregående teknisk uddannelse
  • Er teknisk velfunderet
  • Kan omsætte teori til praktiske løsninger
  • Er god til at skrive tekniske dokumenter - til såvel håndværkere som myndigheder
  • Stilling 1: Solid erhvervserfaring med tilsvarende arbejdsopgaver (styring, koordinering, dokumentskrivning)
  • Stilling 2: Erhvervserfaring med tilsvarende arbejdsopgaver er en fordel, men ikke et krav.

Det er ikke et krav, at du har kendskab til arbejdet med radioaktive materialer. Du vil blive oplært i den nødvendige viden og kommer i løbet af det første halve år på vores interne basisuddannelse i helsefysik.

Din personlige profil
  • Er fleksibel i din tilgang til arbejdsopgaver og forandringsparat
  • Er god til at samarbejde, også med andre faggrupper, og lydhør over for andres input
  • Er både idémager og afslutter
  • Er vedholdende og tager ansvar
  • Har øje for helheden og kan træffe beslutninger, der balancerer mellem modsat rettede parametre

Ansættelsen
Vi forventer at holde ansættelsessamtaler den 12., 13. og 14. februar.
Ansættelsen vil ske efter overenskomst for akademikere i staten.
Dansk DekommissioneringRoskilde2019-01-11T00:00:002019-02-03T00:00:00
329942232Offshore Pipeline Engineer for managing emergency preparednessRobot Do you have an interest in and experience working with the emergency preparedness, operation and maintenance of offshore pipelines? Join us and become Offshore Pipeline Engineer in our O M Offshore Pipelines department, where you ll become part of a team of professionals involved in all disciplines related to the operation and maintenance of offshore pipelines. The department is responsible for the operation and maintenance of approximately 800 kilometres of offshore pipelines one oil and two gas transmission pipelines including associated subsea structures and risers. In general, the department s responsibility includes asset management, emergency preparedness, preparation of inspection programmes, execution of marine operations, inline inspections (pigging) and integrity assessment. Your key tasks will be to be responsible for managing and maintaining the emergency preparedness system for the subsea pipelines be responsible for emergency repair scenarios and oil spill preparedness be responsible for preparing emergency exercises, typically desktop exercises develop and maintain relevant company standards, procedures, tools and databases related to pipeline operation and maintenance in accordance with best industry practice evaluate inspection results. Furthermore, you ll provide input for budgets and reporting to management. Your work will also include tendering for and review of work related to the maintenance of pipeline systems, including working with and managing the work ordered from contractors and consulting engineering companies. When familiar with our systems and experienced in emergency scenarios, you ll be included in a duty roster responding to emergency situations, and you ll be trained to act as the on-scene-commander in case of an offshore oil spill. Furthermore, you may be part of our pool of offshore client representatives to be present on offshore vessels. Your competences include that you have a bachelor s or master s degree, preferably in structural hydrodynamic engineering or in mechanical engineering. However, other relevant technical educational background could be considered as well have essential experience with emergency preparedness systems have moderate experience within subsea operations and or pipeline engineering have experience working with and managing engineering contracting companies, manufacturers and equipment suppliers have a proactive and systematic approach to your work tasks as well as a high focus on health and safety. Furthermore, you thrive in an international environment and can create good relationships with your colleagues and stakeholders. You speak and write English fluently knowledge of the Danish language is an advantage. In collaboration with you, we ll prepare a training programme for you if relevant, depending on your level of competences. Working at Ørsted We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential. Would you like to help shape the energy sector? Send your application to us as soon as possible and no later than 28 January 2019, as we ll be conducting interviews on a continuous basis. Please don t hesitate to contact Lars Erik Storck, Head of O M Offshore Pipelines, by telephone on 45 99 51 26 50, if you d like to know more about the position. You should expect some travelling in relation to your work, as your work may also involve participation in marine campaigns on vessels with a view to supervising subsea activities. About Ørsted Headquartered in Denmark, Ørsted s 6,000 employees develop, construct and operate offshore wind farms, bioenergy plants and innovative waste-to-energy solutions and provide smart energy products to its customers. Ørsted Customer Solutions 500 employees deliver state-of-the-art smart energy solutions and handle all aspects related to purchasing, selling and distributing energy as well as transporting oil and gas from North Sea fields in the Danish sector. For more information on Ørsted, visit orsted.com

Do you have an interest in and experience working with the emergency preparedness, operation and maintenance of offshore pipelines?

Join us and become Offshore Pipeline Engineer in our O&M Offshore Pipelines department, where you’ll become part of a team of professionals involved in all disciplines related to the operation and maintenance of offshore pipelines. The department is responsible for the operation and maintenance of approximately 800 kilometres of offshore pipelines – one oil and two gas transmission pipelines – including associated subsea structures and risers. In general, the department’s responsibility includes asset management, emergency preparedness, preparation of inspection programmes, execution of marine operations, inline inspections (pigging) and integrity assessment.

Your key tasks will be to

  • be responsible for managing and maintaining the emergency preparedness system for the subsea pipelines
  • be responsible for emergency repair scenarios and oil spill preparedness
  • be responsible for preparing emergency exercises, typically desktop exercises
  • develop and maintain relevant company standards, procedures, tools and databases related to pipeline operation and maintenance in accordance with best industry practice
  • evaluate inspection results.

Furthermore, you’ll provide input for budgets and reporting to management. Your work will also include tendering for and review of work related to the maintenance of pipeline systems, including working with and managing the work ordered from contractors and consulting engineering companies.

When familiar with our systems and experienced in emergency scenarios, you’ll be included in a duty roster responding to emergency situations, and you’ll be trained to act as the on-scene-commander in case of an offshore oil spill. Furthermore, you may be part of our pool of offshore client representatives to be present on offshore vessels.

Your competences include that you

  • have a bachelor’s or master’s degree, preferably in structural/hydrodynamic engineering or in mechanical engineering. However, other relevant technical educational background could be considered as well
  • have essential experience with emergency preparedness systems
  • have moderate experience within subsea operations and/or pipeline engineering
  • have experience working with and managing engineering/contracting companies, manufacturers and equipment suppliers
  • have a proactive and systematic approach to your work tasks as well as a high focus on health and safety.
  • Furthermore, you thrive in an international environment and can create good relationships with your colleagues and stakeholders. You speak and write English fluently; knowledge of the Danish language is an advantage.
  • In collaboration with you, we’ll prepare a training programme for you if relevant, depending on your level of competences.

Working at Ørsted

We cultivate a collaborative, dynamic and diverse work environment and encourage career-long learning and development so our people can realise their full potential.

 

Would you like to help shape the energy sector?

Send your application to us as soon as possible and no later than 28 January 2019, as we’ll be conducting interviews on a continuous basis.

Please don’t hesitate to contact Lars Erik Storck, Head of O&M Offshore Pipelines, by telephone on +45 99 51 26 50, if you’d like to know more about the position.

You should expect some travelling in relation to your work, as your work may also involve participation in marine campaigns on vessels with a view to supervising subsea activities.

About Ørsted

Headquartered in Denmark, Ørsted’s 6,000 employees develop, construct and operate offshore wind farms, bioenergy plants and innovative waste-to-energy solutions and provide smart energy products to its customers. Ørsted Customer Solutions’ 500 employees deliver state-of-the-art smart energy solutions and handle all aspects related to purchasing, selling and distributing energy as well as transporting oil and gas from North Sea fields in the Danish sector. For more information on Ørsted, visit orsted.com

 

Ørsted Vind A/SGentofte2019-01-14T00:00:002019-01-28T00:00:00
329941229Robotics Engineer for Innovation HubRobot If you are looking to join a dynamic and innovative team and bring your robotics and automation experience into play, then this is your chance. About the team You will be a part of our Innovation Hub within Manufacturing Development in Diabetes Finished Products, Product Supply. Your working place will be both at our test facility in Kalundborg as well as our global specialist centre in Bagsvaerd. Our mission is to minimise and or eliminate human interventions through manufacturing of our injectable products by means of robotics and automation. In our newly established team you will work together with academics, technicians and external development partners covering a wide range of disciplines. We guarantee that you will be exposed to exciting professional challenges and development opportunities. The job Your overall objective is to conceive and develop automated solutions to optimise our manufacturing by means of robotics, traditional automation and artificial intelligence. In collaboration with mechanical engineers and experts you will be responsible for the design and implementation of prototypes and solutions within processes which today are handled manually. Furthermore, you will be responsible for improving the designs after test interpretation and support that your prototypes will be matured and implemented in our global production network. Apart from hands-on automation, your tasks will be very varied and include innovation sprint facilitation, idea generation, design of solutions, testing and coordination. You will act as project member or project manager, depending on your experience. Qualifications You have an innovative mind set and hold an engineering degree in robotics and automation or have obtained extensive knowledge about robotics and automation through your current work. You have min. 5 years experience working in a development environment, where you have practiced your automation skills. You have solid experience and a proven track record within robotics and traditional automation tools such as PLC. You will to some extent be working together with external partners and therefor you must be outgoing and eager to search for the opportunities in partnerships. Experience within mechanics, design for aseptic processing, GMP and stainless steel is a great plus. When working as project manager and with external partners - navigating among multiple stakeholder interests - your communication and interpersonal skills are essential tools on your road to success. Contact For further information, please contact Ulrik Ullum at 45 3075 0169 or alternatively Lasse Christoffersen at 45 3075 3567. Deadline 27 January 2019 Millions rely on us To work for Novo Nordisk you will need the skills, dedication and ambition to change lives for the better for millions of patients living with diabetes and other chronical diseases. In exchange, we offer the chance to be part of a truly global workplace, where passion and engagement are met with opportunities for professional and personal development.

If you are looking to join a dynamic and innovative team and bring your robotics and automation experience into play, then this is your chance.

 

About the team

You will be a part of our Innovation Hub within Manufacturing Development in Diabetes Finished Products, Product Supply. Your working place will be both at our test facility in Kalundborg as well as our global specialist centre in Bagsvaerd. Our mission is to minimise and/or eliminate human interventions through manufacturing of our injectable products by means of robotics and automation. In our newly established team you will work together with academics, technicians and external development partners covering a wide range of disciplines. We guarantee that you will be exposed to exciting professional challenges and development opportunities.

 

The job

Your overall objective is to conceive and develop automated solutions to optimise our manufacturing by means of robotics, traditional automation and artificial intelligence. In collaboration with mechanical engineers and experts you will be responsible for the design and implementation of prototypes and solutions within processes which today are handled manually. Furthermore, you will be responsible for improving the designs after test interpretation and support that your prototypes will be matured and implemented in our global production network. Apart from hands-on automation, your tasks will be very varied and include innovation sprint facilitation, idea generation, design of solutions, testing and coordination. You will act as project member or project manager, depending on your experience.

 

Qualifications

You have an innovative mind set and hold an engineering degree in robotics and automation or have obtained extensive knowledge about robotics and automation through your current work. You have min. 5 years’ experience working in a development environment, where you have practiced your automation skills. You have solid experience and a proven track record within robotics and traditional automation tools such as PLC. You will to some extent be working together with external partners and therefor you must be outgoing and eager to search for the opportunities in partnerships. Experience within mechanics, design for aseptic processing, GMP and stainless steel is a great plus. When working as project manager and with external partners - navigating among multiple stakeholder interests - your communication and interpersonal skills are essential tools on your road to success.

 

Contact

For further information, please contact Ulrik Ullum at +45 3075 0169 or alternatively Lasse Christoffersen at +45 3075 3567.

 

Deadline

27 January 2019

 

Millions rely on us
To work for Novo Nordisk you will need the skills, dedication and ambition to change lives for the better for millions of patients living with diabetes and other chronical diseases. In exchange, we offer the chance to be part of a truly global workplace, where passion and engagement are met with opportunities for professional and personal development.

NOVO NORDISK A/SBagsværd2019-01-11T00:00:002019-01-27T00:00:00
329941221Mechanical Engineer for Innovation HubRobot If you are looking to join a dynamic and innovative team and bring in your mechanical engineering experience into play, then this is your chance. About the team You will be a part of our Innovation Hub team in Manufacturing Development in Diabetes Finished Products, Product Supply. Your working place will be both at our test factory in Kalundborg as well as our global specialist centre in Bagsværd. The team mission is to minimise or eliminate human interaction with our injectable products by means of robotics, automation and optimisations. In our newly established team you will work together with academics, technicians and external development partners covering a wide range of disciplines. We guarantee that you will be exposed to exciting professional challenges and development opportunities. The job Your overall objective is to conceive and develop mechanical solutions to optimise our production. You will be responsible for drawing the mechanical designs in CAD, improve the design after test interpretation and furthermore to make the ideas come to live by implementation in our global production network. Your tasks will be very varied and include innovation sprint facilitation, idea generation, design of mechanical solutions, testing and coordination. You will be providing support to projects as well as coordinator and project manager for projects, depending on your experience. Qualifications You have an innovative mind set and hold a M.Sc. in Mechanical Engineering or similar. You have 5 years experience working in a development environment, where you have practiced your mechanical engineering skills. You have solid CAD experience and a proven track record within mechanical design. You will to some extent be working together with external partners and therefor you must be outgoing and eager to search for the opportunities in partnerships. Experience within robotics, automation, design for aseptic processing, GMP and stainless steel is a great plus. When working as project manager and with external partners - navigating among multiple stakeholder interests - your communication and interpersonal skills are essential tools on your road to success. Contact For further information, please contact Ulrik Ullum at 45 3075 0169 or alternatively Lasse Christoffersen at 45 3075 3567. Deadline 27 January 2019 Millions rely on us To work for Novo Nordisk you will need the skills, dedication and ambition to change lives for the better for millions of patients living with diabetes and other chronical diseases. In exchange, we offer the chance to be part of a truly global workplace, where passion and engagement are met with opportunities for professional and personal development.

If you are looking to join a dynamic and innovative team and bring in your mechanical engineering experience into play, then this is your chance.

 

About the team

You will be a part of our Innovation Hub team in Manufacturing Development in Diabetes Finished Products, Product Supply. Your working place will be both at our test factory in Kalundborg as well as our global specialist centre in Bagsværd. The team mission is to minimise or eliminate human interaction with our injectable products by means of robotics, automation and optimisations. In our newly established team you will work together with academics, technicians and external development partners covering a wide range of disciplines. We guarantee that you will be exposed to exciting professional challenges and development opportunities.

 

The job

Your overall objective is to conceive and develop mechanical solutions to optimise our production. You will be responsible for drawing the mechanical designs in CAD, improve the design after test interpretation and furthermore to make the ideas come to live by implementation in our global production network. Your tasks will be very varied and include innovation sprint facilitation, idea generation, design of mechanical solutions, testing and coordination. You will be providing support to projects as well as coordinator and project manager for projects, depending on your experience.

 

Qualifications

You have an innovative mind set and hold a M.Sc. in Mechanical Engineering or similar. You have 5 years’ experience working in a development environment, where you have practiced your mechanical engineering skills. You have solid CAD experience and a proven track record within mechanical design. You will to some extent be working together with external partners and therefor you must be outgoing and eager to search for the opportunities in partnerships. Experience within robotics, automation, design for aseptic processing, GMP and stainless steel is a great plus. When working as project manager and with external partners - navigating among multiple stakeholder interests - your communication and interpersonal skills are essential tools on your road to success.

 

Contact

For further information, please contact Ulrik Ullum at +45 3075 0169 or alternatively Lasse Christoffersen at +45 3075 3567.

 

Deadline

27 January 2019

 

Millions rely on us
To work for Novo Nordisk you will need the skills, dedication and ambition to change lives for the better for millions of patients living with diabetes and other chronical diseases. In exchange, we offer the chance to be part of a truly global workplace, where passion and engagement are met with opportunities for professional and personal development.

NOVO NORDISK A/SBagsværd2019-01-11T00:00:002019-01-27T00:00:00
da-DK

Andre job der matcher din søgning

Pipe System Design Engineers

NATIONAL OILWELL VARCO DENMARK I/S

Brøndby
Description Pipe System Design Engineer Do you want to play an important role in the development of challenging offshore projects? National Oilwell Varco Subsea Production Systems (NOV SPS) designs and manufactures flexible pipes and bespoken, innov...
Indrykket:19. december 2018
Udløbsdato:13. februar 2019

To ingeniører søges til dekommissionering

Dansk Dekommissionering

Roskilde
Dansk Dekommissionering har fået tilført nye arbejdsopgaver, og vi har derfor brug for flere kræfter. Vi søger nu to nye ingeniørkolleger, som skal være med til at afrense, adskille og pakke de nukleare anlæg på Risø. Som projektingeniør i DD er din...
Indrykket:11. januar 2019
Udløbsdato:3. februar 2019

Offshore Pipeline Engineer for managing emergency preparedness

Ørsted Vind A/S

Gentofte
Do you have an interest in and experience working with the emergency preparedness, operation and maintenance of offshore pipelines? Join us and become Offshore Pipeline Engineer in our O M Offshore Pipelines department, where you ll become part of a...
Indrykket:14. januar 2019
Udløbsdato:28. januar 2019

Robotics Engineer for Innovation Hub

NOVO NORDISK A/S

Bagsværd
If you are looking to join a dynamic and innovative team and bring your robotics and automation experience into play, then this is your chance. About the team You will be a part of our Innovation Hub within Manufacturing Development in Diabetes Fini...
Indrykket:11. januar 2019
Udløbsdato:27. januar 2019

Mechanical Engineer for Innovation Hub

NOVO NORDISK A/S

Bagsværd
If you are looking to join a dynamic and innovative team and bring in your mechanical engineering experience into play, then this is your chance. About the team You will be a part of our Innovation Hub team in Manufacturing Development in Diabetes F...
Indrykket:11. januar 2019
Udløbsdato:27. januar 2019