Bemærk at denne jobannonce er udløbet!
Ansøgningsfristen for jobannoncen er overskredet, og stillingen kan ikke længere søges. Opslaget vises udelukkende som reference

Testingeniør

Nel Hydrogen A/S. Virksomheden er i øjeblikket 100 ansatte i den danske afdeling, og forventer at opretholde en stor vækst i de kommende år. Organisationen er dynamisk, kulturen er uformel og fleksibilitet er et nøgleord. Nel Hydrogen er frontløber når det kommer til udvikling af brinttankstationer. Markedet for brinttankstationer forventes at vokse markant i takt med, at de store bilproducenter lancerer deres brintbiler i de kommende år, ligesom udviklingen af andre typer brintkøretøjer nu tager fart. Nel Hydrogen har positioneret sig som en global spiller indenfor den hurtigt voksende hydrogen økonomi.

Om Technology & Development (T&D) afdelingen og jobbet
T&D afdelingen hos Nel Hydrogen udvikler komplekse produkter og ny teknologi, og omfatter en bred vifte af tekniske kompetencer indenfor proces, elektronik og mekanik, samt prototype opbygning og test.

Som testingeniør i T&D får du en nøglerolle med at teste nye komponenter og produkter. Du vil deltage i udviklingsprojekterne sammen med de øvrige T&D teams. Du samarbejder med projektlederne i de forskellige faser af udviklingen, og er ansvarlig for at testene bliver udført.

Dine opgaver bliver

  • Udførelse af tests på mekaniske/elektroniske komponenter, systemer og produkter
  • Interagere med øvrige T&D teams for at identificere hvilke test der skal udføres
  • Udvikle testplaner ved at præcisere sekvenser og mål
  • Deltage i udvikling af testbænke og testprototyper
  • Sikre at testinstallationerne er operationelle og tilgængelige
  • Vedligeholdelse af testudstyr og installationer
  • Gennemførelse af testplaner og udarbejdelse af testrapporter

Om dig
For at lykkedes i stillingen er det vigtigt, at du har flere års dokumenteret erfaring som testingeniør indenfor tekniske områder som f.eks. gasproces, el- og mekanisk design, processtyring, dokumentation eller idriftsættelse/testning. Du skal have interesse for praktiske test opgaver, og ideelt set har du måske også erfaring med brint teknologien. Det er vigtigt, at du kan håndtere flere opgaver på samme tid, og at du er fleksibel og kan navigere i et ofte meget dynamisk miljø.

Herudover forventer vi at

  • Du har en relevant uddannelsesmæssig baggrund og en stærk teknisk interesse og forståelse
  • Du har erfaring i procesdesign, processtyring og idriftsættelse eller testning
  • Du arbejder struktureret, og du kan se det store billede uden at fordybe dig alt for meget i tekniske detaljer
  • Du træffer de nødvendige beslutninger indenfor dit område, men kan tage andre med på råd, når det er nødvendigt
  • Du er en god kommunikator – både i skrift og tale (flydende i engelsk)
  • Du er naturligvis en erfaren bruger af Microsoft Office pakken

Nel Hydrogen tilbyder
Du tilbydes et spændende og udviklende job, hvor du bliver en del af T&D afdelingen, som i dag består af 23 medarbejdere. T&D er delt i to områder Technology samt Development. Test ingeniøren vil indgå i Development. Du vil komme til at arbejde i et miljø, hvor forandring er en del af hverdagen, og hvor du med din erfaring og viden i høj grad vil kunne påvirke produktet og opgaven. Som ingeniør vil du i din dagligdag opleve fordelen af at produktudvikling og produktion sker i samme hus og at produktionen foregår lidt længere nede ad gangen, så du har mulighed for at se og røre resultatet af dit arbejde.

Nel Hydrogen er beliggende i Lind ved Herning, i topmoderne faciliteter, og tilbyder medarbejderne mange personalegoder som eksempelvis en god kantineordning, pension med sundhedssikring og massageordning.

Ansøgning og henvendelse
Send din ansøgning samt CV hurtigst muligt til Pro&Co via knappen ”Søg stillingen”. Samtaler afholdes løbende.

Forventet ansættelsesstart: hurtigst muligt.

Om Nel Hydrogen A/S | www.nel-hydrogen.com
Nel Hydrogen A/S – er en førende producent af H2Station® brintstationer, som giver brintbiler den samme hurtige optankning og rækkevidde som konventionelle biler. Nel Hydrogen har investeret i udviklingen af H2Station® siden 2003 og teknologien markedsføres i dag til markeder, hvor større netværk af brintstationer er under etablering. Nel Hydrogen er en del af NEL ASA, som er noteret på Oslo Børsen. NEL ASA er en førende producent af hydrogen teknologi til industri og energiformål med over 500 leverancer i mere end 50 lande.


Mere af samme slags?

Angiv din e-mail og få lignende job direkte i indbakken




Når du tilmelder dig accepterer du samtidig vores privativspolitik

330005684Phoenix-8c6c5b9f12019-04-11T00:00:00Testingeniør

Nel Hydrogen A/S. Virksomheden er i øjeblikket 100 ansatte i den danske afdeling, og forventer at opretholde en stor vækst i de kommende år. Organisationen er dynamisk, kulturen er uformel og fleksibilitet er et nøgleord. Nel Hydrogen er frontløber når det kommer til udvikling af brinttankstationer. Markedet for brinttankstationer forventes at vokse markant i takt med, at de store bilproducenter lancerer deres brintbiler i de kommende år, ligesom udviklingen af andre typer brintkøretøjer nu tager fart. Nel Hydrogen har positioneret sig som en global spiller indenfor den hurtigt voksende hydrogen økonomi.

Om Technology & Development (T&D) afdelingen og jobbet
T&D afdelingen hos Nel Hydrogen udvikler komplekse produkter og ny teknologi, og omfatter en bred vifte af tekniske kompetencer indenfor proces, elektronik og mekanik, samt prototype opbygning og test.

Som testingeniør i T&D får du en nøglerolle med at teste nye komponenter og produkter. Du vil deltage i udviklingsprojekterne sammen med de øvrige T&D teams. Du samarbejder med projektlederne i de forskellige faser af udviklingen, og er ansvarlig for at testene bliver udført.

Dine opgaver bliver

  • Udførelse af tests på mekaniske/elektroniske komponenter, systemer og produkter
  • Interagere med øvrige T&D teams for at identificere hvilke test der skal udføres
  • Udvikle testplaner ved at præcisere sekvenser og mål
  • Deltage i udvikling af testbænke og testprototyper
  • Sikre at testinstallationerne er operationelle og tilgængelige
  • Vedligeholdelse af testudstyr og installationer
  • Gennemførelse af testplaner og udarbejdelse af testrapporter

Om dig
For at lykkedes i stillingen er det vigtigt, at du har flere års dokumenteret erfaring som testingeniør indenfor tekniske områder som f.eks. gasproces, el- og mekanisk design, processtyring, dokumentation eller idriftsættelse/testning. Du skal have interesse for praktiske test opgaver, og ideelt set har du måske også erfaring med brint teknologien. Det er vigtigt, at du kan håndtere flere opgaver på samme tid, og at du er fleksibel og kan navigere i et ofte meget dynamisk miljø.

Herudover forventer vi at

  • Du har en relevant uddannelsesmæssig baggrund og en stærk teknisk interesse og forståelse
  • Du har erfaring i procesdesign, processtyring og idriftsættelse eller testning
  • Du arbejder struktureret, og du kan se det store billede uden at fordybe dig alt for meget i tekniske detaljer
  • Du træffer de nødvendige beslutninger indenfor dit område, men kan tage andre med på råd, når det er nødvendigt
  • Du er en god kommunikator – både i skrift og tale (flydende i engelsk)
  • Du er naturligvis en erfaren bruger af Microsoft Office pakken

Nel Hydrogen tilbyder
Du tilbydes et spændende og udviklende job, hvor du bliver en del af T&D afdelingen, som i dag består af 23 medarbejdere. T&D er delt i to områder Technology samt Development. Test ingeniøren vil indgå i Development. Du vil komme til at arbejde i et miljø, hvor forandring er en del af hverdagen, og hvor du med din erfaring og viden i høj grad vil kunne påvirke produktet og opgaven. Som ingeniør vil du i din dagligdag opleve fordelen af at produktudvikling og produktion sker i samme hus og at produktionen foregår lidt længere nede ad gangen, så du har mulighed for at se og røre resultatet af dit arbejde.

Nel Hydrogen er beliggende i Lind ved Herning, i topmoderne faciliteter, og tilbyder medarbejderne mange personalegoder som eksempelvis en god kantineordning, pension med sundhedssikring og massageordning.

Ansøgning og henvendelse
Send din ansøgning samt CV hurtigst muligt til Pro&Co via knappen ”Søg stillingen”. Samtaler afholdes løbende.

Forventet ansættelsesstart: hurtigst muligt.

Om Nel Hydrogen A/S | www.nel-hydrogen.com
Nel Hydrogen A/S – er en førende producent af H2Station® brintstationer, som giver brintbiler den samme hurtige optankning og rækkevidde som konventionelle biler. Nel Hydrogen har investeret i udviklingen af H2Station® siden 2003 og teknologien markedsføres i dag til markeder, hvor større netværk af brintstationer er under etablering. Nel Hydrogen er en del af NEL ASA, som er noteret på Oslo Børsen. NEL ASA er en førende producent af hydrogen teknologi til industri og energiformål med over 500 leverancer i mere end 50 lande.

2019-05-29T17:52:29.093 Nel Hydrogen A S. Virksomheden er i øjeblikket 100 ansatte i den danske afdeling, og forventer at opretholde en stor vækst i de kommende år. Organisationen er dynamisk, kulturen er uformel og fleksibilitet er et nøgleord. Nel Hydrogen er frontløber når det kommer til udvikling af brinttankstationer. Markedet for brinttankstationer forventes at vokse markant i takt med, at de store bilproducenter lancerer deres brintbiler i de kommende år, ligesom udviklingen af andre typer brintkøretøjer nu tager fart. Nel Hydrogen har positioneret sig som en global spiller indenfor den hurtigt voksende hydrogen økonomi. Om Technology Development (T D) afdelingen og jobbet T D afdelingen hos Nel Hydrogen udvikler komplekse produkter og ny teknologi, og omfatter en bred vifte af tekniske kompetencer indenfor proces, elektronik og mekanik, samt prototype opbygning og test. Som testingeniør i T D får du en nøglerolle med at teste nye komponenter og produkter. Du vil deltage i udviklingsprojekterne sammen med de øvrige T D teams. Du samarbejder med projektlederne i de forskellige faser af udviklingen, og er ansvarlig for at testene bliver udført. Dine opgaver bliver Udførelse af tests på mekaniske elektroniske komponenter, systemer og produkter Interagere med øvrige T D teams for at identificere hvilke test der skal udføres Udvikle testplaner ved at præcisere sekvenser og mål Deltage i udvikling af testbænke og testprototyper Sikre at testinstallationerne er operationelle og tilgængelige Vedligeholdelse af testudstyr og installationer Gennemførelse af testplaner og udarbejdelse af testrapporter Om dig For at lykkedes i stillingen er det vigtigt, at du har flere års dokumenteret erfaring som testingeniør indenfor tekniske områder som f.eks. gasproces, el- og mekanisk design, processtyring, dokumentation eller idriftsættelse testning. Du skal have interesse for praktiske test opgaver, og ideelt set har du måske også erfaring med brint teknologien. Det er vigtigt, at du kan håndtere flere opgaver på samme tid, og at du er fleksibel og kan navigere i et ofte meget dynamisk miljø. Herudover forventer vi at Du har en relevant uddannelsesmæssig baggrund og en stærk teknisk interesse og forståelse Du har erfaring i procesdesign, processtyring og idriftsættelse eller testning Du arbejder struktureret, og du kan se det store billede uden at fordybe dig alt for meget i tekniske detaljer Du træffer de nødvendige beslutninger indenfor dit område, men kan tage andre med på råd, når det er nødvendigt Du er en god kommunikator både i skrift og tale (flydende i engelsk) Du er naturligvis en erfaren bruger af Microsoft Office pakken Nel Hydrogen tilbyder Du tilbydes et spændende og udviklende job, hvor du bliver en del af T D afdelingen, som i dag består af 23 medarbejdere. T D er delt i to områder Technology samt Development. Test ingeniøren vil indgå i Development. Du vil komme til at arbejde i et miljø, hvor forandring er en del af hverdagen, og hvor du med din erfaring og viden i høj grad vil kunne påvirke produktet og opgaven. Som ingeniør vil du i din dagligdag opleve fordelen af at produktudvikling og produktion sker i samme hus og at produktionen foregår lidt længere nede ad gangen, så du har mulighed for at se og røre resultatet af dit arbejde. Nel Hydrogen er beliggende i Lind ved Herning, i topmoderne faciliteter, og tilbyder medarbejderne mange personalegoder som eksempelvis en god kantineordning, pension med sundhedssikring og massageordning. Ansøgning og henvendelse Send din ansøgning samt CV hurtigst muligt til Pro Co via knappen Søg stillingen . Samtaler afholdes løbende. Forventet ansættelsesstart: hurtigst muligt. Om Nel Hydrogen A S www.nel-hydrogen.com Nel Hydrogen A S er en førende producent af H2Station brintstationer, som giver brintbiler den samme hurtige optankning og rækkevidde som konventionelle biler. Nel Hydrogen har investeret i udviklingen af H2Station siden 2003 og teknologien markedsføres i dag til markeder, hvor større netværk af brintstationer er under etablering. Nel Hydrogen er en del af NEL ASA, som er noteret på Oslo Børsen. NEL ASA er en førende producent af hydrogen teknologi til industri og energiformål med over 500 leverancer i mere end 50 lande.11jobnet8c6c5b9f100000000000IDK_OFIR_02DKDanmark228DKK2019-06-06T00:00:000000http://www.proogco.dk/til-kandidater/jobs?hr=show-job/426570EuropaDanmarkJyllandMidtjyllandIkast-Brande3506792pro&co a/s11Vejlevej 57400HerningDKDanmark0kr@proogco.dkDKDanmarkDKDanmark8Fuldtid46Permanent744209JobNet4974351497435110011-04-20190https://dispatcher.ofir.dk/statistic/register?context=FeedEntrySearchedCount&feedId=dc2beb84&entryId=8c6c5b9fhttps://dispatcher.ofir.dk/statistic/register?context=FeedEntryDisplayCount&feedId=dc2beb84&entryId=8c6c5b9fhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationInitiatedCount&feedId=dc2beb84&entryId=8c6c5b9f&page=ShowJob&component=SendApplicationButtonhttps://dispatcher.ofir.dk/statistic/register?context=JobApplicationAppliedCount&feedId=dc2beb84&entryId=8c6c5b9f&page=EmailApplyForm&component=SendApplicationButton1Dansk3Læse/ tale214501Maskiningeniør20Ingeniør og naturvidenskab361436498Kristiankr@proogco.dkDKDanmarkDKDanmark330064450Senior Mechanical Engineer for wind power solution project_DKRobot Would you like to join a global team of brilliant, creative engineers designing the most innovative, efficient and stable wind power solutions? Joining us in Ikast, you will become a part of a global team with 2 colleagues in Denmark, 8 in Poland and 5 in India, working to create mechanical solutions for wind turbines. From small electrical cabinets to 20 meter tall steel constructions the team is there to design and develop the right solutions that are stable, durable, energy efficient and meet the needs of the clients. Your very first project will be to design a new steel structure for a large Danish client as part of a design team. Your challenge will be to understand the requirements and defy conventional thinking to create a new solution. You will work together with project managers and fellow engineers and be involved all the way from the very start, following the processes up until prototyping and production to ensure an optimal design. This will truly be your brainchild as you will work on the design from the very scratch, says Senior Manager of Global Engineering Kim Svane Brinch. For every project, you: Work with project and technical project managers to understand client needs and design requirements Design 2D and 3D solutions using SolidWorks, Creo and Siemens NX Travel up to 20 days per year to collaborate with colleagues mainly in Poland and India Mechanical engineer with a creative eye We are constantly working to challenge current designs and processes. It is therefore important that you are highly creative, curious and driven to think outside of the gear box. It is likewise vital that you are happy with constantly working on new projects and challenges and that you like treading on unknown technical territories every once in a while. Moreover, you: Have 5 years of experience with mechanical machine engineering Possess some knowledge of design software knowledge of SolidWorks ePDM, Windchill, Teamcenter or a similar PLM system is a plus Speak and write English effortlessly Ready for a career in wind power? At KK Wind Solutions Service, we are passionate about designing, producing and servicing innovative solutions that push the boundaries of wind power. We have done so for more than 35 years thanks to our more than 800 highly skilled employees dedicated to making a meaningful contribution to global sustainability. We employ the best talent to stay at the forefront of the renewables industry, and we work to provide our employees with the best learning and development opportunities. Interested? If this position sounds appealing to you, please send your resume and cover letter in English as soon as possible. Interviews are held on an ongoing basis. We look forward to hearing from you.

Would you like to join a global team of brilliant, creative engineers designing the most innovative, efficient and stable wind power solutions?

Joining us in Ikast, you will become a part of a global team with 2 colleagues in Denmark, 8 in Poland and 5 in India, working to create mechanical solutions for wind turbines. From small electrical cabinets to 20 meter tall steel constructions – the team is there to design and develop the right solutions that are stable, durable, energy efficient and meet the needs of the clients.

Your very first project will be to design a new steel structure for a large Danish client as part of a design team. Your challenge will be to understand the requirements and defy conventional thinking to create a new solution. You will work together with project managers and fellow engineers and be involved all the way from the very start, following the processes up until prototyping and production to ensure an optimal design.

“This will truly be your brainchild as you will work on the design from the very scratch,” says Senior Manager of Global Engineering Kim Svane Brinch.

For every project, you:
Work with project and technical project managers to understand client needs and design requirements

Design 2D and 3D solutions using SolidWorks, Creo and Siemens NX

Travel up to 20 days per year to collaborate with colleagues mainly in Poland and India

Mechanical engineer with a creative eye

We are constantly working to challenge current designs and processes. It is therefore important that you are highly creative, curious and driven to think outside of the gear box. It is likewise vital that you are happy with constantly working on new projects and challenges and that you like treading on unknown technical territories every once in a while.

Moreover, you:
Have 5+ years of experience with mechanical/machine engineering

Possess some knowledge of design software – knowledge of SolidWorks ePDM, Windchill, Teamcenter or a similar PLM system is a plus

Speak and write English effortlessly

Ready for a career in wind power?

At KK Wind Solutions Service, we are passionate about designing, producing and servicing innovative solutions that push the boundaries of wind power. We have done so for more than 35 years thanks to our more than 800 highly skilled employees dedicated to making a meaningful contribution to global sustainability.

We employ the best talent to stay at the forefront of the renewables industry, and we work to provide our employees with the best learning and development opportunities.

Interested?
If this position sounds appealing to you, please send your resume and cover letter in English as soon as possible. Interviews are held on an ongoing basis. We look forward to hearing from you.

KK WIND SOLUTIONS A/SIkast2019-07-26T00:00:002019-09-18T00:00:00
330068171Structural Simulation SpecialistRobot What do we offer? Would you like to design, optimize and verify the structural performance of world class pumps using advanced structural simulations? Grundfos has a strong strategic focus on Simulation Driven Development and our vision is to develop all products with extensive usage of simulations. You will become a part of the department Structural Design Simulations, which is a part of the Mechanical Development function in Grundfos, and you will be responsible for driving the structural design of new products, offerings and platforms by extensive use of simulations and optimization. We offer a challenging workplace with excellent professional and personal development opportunities in an inspiring, international work environment with the world s leading pump manufacturer and industry leading experts. We value initiative, responsibility and the right balance between creativity and quality in all solutions. You refer to the Manager of Structural Design Simulations, Anders Bøge. You will join a young dedicated team in a highly professional environment with a strong technical commitment. Furthermore, you will gain a close cooperation with simulation engineers across Grundfos focusing on process, hydraulic, motor, hardware simulations etc. and together you will form the future for product development at Grundfos, Anders explains. What is the job about? As our new Structural Simulation Specialist, you will be responsible for applying structural simulations in our product development projects and for ensuring that simulations are used to drive the design. You will be performing advanced structural simulations, non-linear analyses that include large deformations, plasticity and multiple contacts. You conduct modal and harmonic analyses of large assemblies and carry out fatigue and fracture simulations on polymer and metal components. Moreover, you apply state of the art optimization techniques as topology and parameter optimization and perform optimization studies to develop high performing, robust and low-cost components. As you get your results, you translate them into understandable findings and communicate these to designers and project managers by e.g. creating high quality documentation. In addition to this you will also use your structural experience to provide solid structural recommendations to the Grundfos Engineering function dealing with product lifecycle management. Finally, you will have an important role in securing the quality of our structural simulations by mentoring non-specialist colleagues in the use of simulations to ensure democratization across the global sites of the Mechanical Development function, as well as conducting reviews. This is a position where you apply simulations to develop market leading solutions, only made possible by the use of simulations, Anders elaborates. What do you need to apply? You have an M.Sc. in Mechanical Engineering and a deep understanding of structural mechanics, physics and materials. This is combined with some years of experience in R D activities, working with structural simulations static, dynamic, modal, fatigue, fracture, as well as parameter and topology optimization. Moreover, it is an advantage if you have knowledge of process simulations, multi-physics simulations (e.g. FSI) and programming (e.g. MATLAB, APDL). Experience with ANSYS, OptiSLang and CATIA (3D CAD) is also an advantage. You speak and write English fluently. On a personal level, you are a proactive team player with an international mind-set. You carry out simulations and find solutions independently, using your analytical and systematic skills. You dare to challenge the status quo and are persistent about the value and insight that structural simulations provide. And finally, your interpersonal skills allow you to translate your specialist knowledge into input and solutions for non-specialists and provide them with valuable insight and recommendations, Anders finishes. Additional information: In case you have any questions or want to know more about the position, please contact Anders Bøge Jensen on 45 22 78 43 33 (from the 12th August and onwards). If this job sounds appealing to you, please send your resume and motivation letter as soon as possible and latest by 5th September 2019 by clicking on Apply . We expect to conduct interviews on 13th September 2019. We look forward to hearing from you. If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com company 5195 or our YouTube channel: https: www.youtube.com watch?v zwY54t455CU.

What do we offer?

Would you like to design, optimize and verify the structural performance of world class pumps using advanced structural simulations?

Grundfos has a strong strategic focus on Simulation Driven Development and our vision is to develop all products with extensive usage of simulations.

You will become a part of the department Structural Design & Simulations, which is a part of the Mechanical Development function in Grundfos, and you will be responsible for driving the structural design of new products, offerings and platforms by extensive use of simulations and optimization.

We offer a challenging workplace with excellent professional and personal development opportunities in an inspiring, international work environment with the world’s leading pump manufacturer and industry leading experts. We value initiative, responsibility and the right balance between creativity and quality in all solutions. You refer to the Manager of Structural Design & Simulations, Anders Bøge.

“You will join a young dedicated team in a highly professional environment with a strong technical commitment. Furthermore, you will gain a close cooperation with simulation engineers across Grundfos focusing on process, hydraulic, motor, hardware simulations etc. and together you will form the future for product development at Grundfos,” Anders explains.

What is the job about?

As our new Structural Simulation Specialist, you will be responsible for applying structural simulations in our product development projects and for ensuring that simulations are used to drive the design. You will be performing advanced structural simulations, non-linear analyses that include large deformations, plasticity and multiple contacts. You conduct modal and harmonic analyses of large assemblies and carry out fatigue and fracture simulations on polymer and metal components.

Moreover, you apply state of the art optimization techniques as topology and parameter optimization and perform optimization studies to develop high performing, robust and low-cost components. As you get your results, you translate them into understandable findings and communicate these to designers and project managers by e.g. creating high quality documentation. In addition to this you will also use your structural experience to provide solid structural recommendations to the Grundfos Engineering function dealing with product lifecycle management.

Finally, you will have an important role in securing the quality of our structural simulations by mentoring non-specialist colleagues in the use of simulations to ensure democratization across the global sites of the Mechanical Development function, as well as conducting reviews.

“This is a position where you apply simulations to develop market leading solutions, only made possible by the use of simulations,” Anders elaborates.

What do you need to apply?

You have an M.Sc. in Mechanical Engineering and a deep understanding of structural mechanics, physics and materials. This is combined with some years of experience in R&D activities, working with structural simulations – static, dynamic, modal, fatigue, fracture, as well as parameter and topology optimization. Moreover, it is an advantage if you have knowledge of process simulations, multi-physics simulations (e.g. FSI) and programming (e.g. MATLAB, APDL). Experience with ANSYS, OptiSLang and CATIA (3D CAD) is also an advantage. You speak and write English fluently.

“On a personal level, you are a proactive team player with an international mind-set. You carry out simulations and find solutions independently, using your analytical and systematic skills. You dare to challenge the status quo and are persistent about the value and insight that structural simulations provide. And finally, your interpersonal skills allow you to translate your specialist knowledge into input and solutions for non-specialists and provide them with valuable insight and recommendations,” Anders finishes.

Additional information:

In case you have any questions or want to know more about the position, please contact Anders Bøge Jensen on +45 22 78 43 33 (from the 12th August and onwards).    

If this job sounds appealing to you, please send your resume and motivation letter as soon as possible and latest by 5th September 2019 by clicking on “Apply”. We expect to conduct interviews on 13th September 2019.

 

 We look forward to hearing from you.

 

If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com/company/5195 or our YouTube channel: https://www.youtube.com/watch?v=zwY54t455CU.

GRUNDFOS HOLDING A/SBjerringbro2019-08-05T00:00:002019-09-05T00:00:00
330050348Engineers with EASA Part 66 B1 AML for Line MaintenanceRobot Skyways Technics A S is searching for qualified, motivated and team oriented Engineers for Line Maintenance working on fixed wing aircraft. We offer permanent positions located at our facility in Billund, Denmark. Preferable is applicants with AML and relevant type courses on the following aircraft: ATR 42 72 series. Certified Engineers with Team Leader experience are also of interest. You will work in a team with highly qualified colleagues and must expect varied working hours including night shift. Applications are invited from candidates with the following skills and experience: Proven EASA Part 66 B1 AML or combined B1 B2 Previous experience on line maintenance as a technician Can work structured, autonomous and good at decision making Quality conscious Excellent English knowledge Team player Remain calm in stressful situations You are energetic and flexible Applicants must have the right to live and work in Denmark Your options: When you join Skyways Technics A S, you sign up for an exciting and all-round job as permanent staff member in an international environment. An exciting and challenging opportunity for a highly motivated individual with a go-to attitude, prepared to work both autonomously and as a team player. Major changes and fast expansion within the organization provides great opportunities for both personal and professional development. You will be working within a young company where Competence, Co-operation, Respect and Responsibility are key values. Application: If you have any questions as to the job, please contact Line Maintenance Manager Kenn Knudsen, phone 45 27 77 97 15 or kdk@skywaystechnics.com Please apply at your earliest convenience. We do not have an application deadline but accept applications as long as the job is posted. The position will be closed down once we have found the right candidate. Please send your application with relevant documentation to: HR@skywaystechnics.com

Skyways Technics A/S is searching for qualified, motivated and team oriented Engineers for Line Maintenance working on fixed wing aircraft. We offer permanent positions located at our facility in Billund, Denmark.

Preferable is applicants with AML and relevant type courses on the following aircraft: ATR 42/72 series. Certified Engineers with Team Leader experience are also of interest.

You will work in a team with highly qualified colleagues and must expect varied working hours including night shift.

Applications are invited from candidates with the following skills and experience:

  • Proven EASA Part 66 B1 AML or combined B1/B2
  • Previous experience on line maintenance as a technician
  • Can work structured, autonomous and good at decision making
  • Quality conscious
  • Excellent English knowledge
  • Team player
  • Remain calm in stressful situations
  • You are energetic and flexible
  • Applicants must have the right to live and work in Denmark

Your options:

When you join Skyways Technics A/S, you sign up for an exciting and all-round job as permanent staff member in an international environment. An exciting and challenging opportunity for a highly motivated individual with a go-to attitude, prepared to work both autonomously and as a team player. Major changes and fast expansion within the organization provides great opportunities for both personal and professional development. You will be working within a young company where Competence, Co-operation, Respect and Responsibility are key values.

Application:

If you have any questions as to the job, please contact Line Maintenance Manager Kenn Knudsen, phone +45 27 77 97 15 or kdk@skywaystechnics.com

Please apply at your earliest convenience. We do not have an application deadline but accept applications as long as the job is posted. The position will be closed down once we have found the right candidate. Please send your application with relevant documentation to: HR@skywaystechnics.com

 

SKYWAYS TECHNICS A/S, BLLBillund2019-06-28T00:00:002019-08-21T00:00:00
330046911Virtual Development EngineerRobot What do we offer? Do you love working on virtual simulations and 3D design, within our digital journey? Would you like a job that gives you the best of both worlds? Based on theoretical data and virtual simulation, you will be able to see results quickly and play an important role in enhancing the performance of our innovative pumps, which make a difference to people around the world. Based in our Sub-Component-Hydraulics department, you will join 5 engineers and technicians who have a global responsibility within our core technologies: Innovation and exploitation of new technologies developing and managing the manufacturing base and core technologies and ensuring integration and improvements of products. You refer to Department Head Peter Thomsen Høgh. Our team work is based on feedback and helping each other. There will be one other colleague working in the same field as you, who will be ready to teach you everything you need to know to be successful in the job. Collaboration is also very important to us as we work not just within our team, but also across the whole organization globally, Peter explains. What is the job about? Rather than producing practical prototypes, we now want to carry out virtual simulations in Grundfos to find the right solution right away. New solution concepts can be tested and the functionality of these can be verified before purchasing and manufacturing of components. This allows us to carry out virtual testing loops and gives us more scope to test new ideas, and it can be done early in the project without major economic costs. You will be responsible for reducing lead-time by securing a robust design on new and existing production equipment. You do so using simulation and by developing processes in tool concepts and integration with periphery equipment, including welding principles. Your main tasks will therefore include: Cooperating across the organization to achieve the best results within time, cost, and quality, where you maintain an overview of the different processes, so that we can make the right decisions together. Applying simulations virtually, from the product simulation to equipment, and further to the production line machine. Working on the entire virtual production concept from 3D product to the final part assembly of components in our production area. Ensuring knowledge sharing in our organization through internal and external networks What do you need to apply? Most important to us is your interest within this specific area and your wish to work on both virtual simulations and 3D CAD construction. If you have experience these areas, that is a big plus. Moreover, we imagine that you: Are a Mechanical Engineer (Manufacturing Engineering) or hold an MSc. in Engineering in Technology Based Business Development or International Technology Management Have experience with finite element analysis, topology optimisation and robust design Have experience with 3D CAD modelling (We use Catia V5) - preferably within welding Have experience in simulation of production equipment in Catia and or LS-Dyna Speak and write English fluently. On a personal level, you are outgoing and thrive collaborating with colleagues. Also, you do not mind being a bit of a nerd when it comes to analysing simulation and welding of components to figure out which processes will bring us success. With your analytical mind-set, you have to stay updated on developments to know which components to produce and how, Peter finishes. Additional informationIf you have questions or want to know more about the position, please contact Department Head Peter Thomsen Høgh on 45 87 50 44 21. If this job sounds appealing to you, please send your resume and cover letter today and no later than 02 August 2019 by clicking on Apply . We expect interviews to be held on Week 28 2019. We look forward to hearing from you. If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com company 5195 or our YouTube channel: www.youtube.com watch?v zwY54t455CU

What do we offer?

Do you love working on virtual simulations and 3D design, within our digital journey? Would you like a job that gives you the best of both worlds? Based on theoretical data and virtual simulation, you will be able to see results quickly and play an important role in enhancing the performance of our innovative pumps, which make a difference to people around the world.

Based in our Sub-Component-Hydraulics department, you will join 5 engineers and technicians who have a global responsibility within our core technologies: Innovation and exploitation of new technologies; developing and managing the manufacturing base and core technologies; and ensuring integration and improvements of products. You refer to Department Head Peter Thomsen Høgh.

Our team work is based on feedback and helping each other. There will be one other colleague working in the same field as you, who will be ready to teach you everything you need to know to be successful in the job. Collaboration is also very important to us as we work not just within our team, but also across the whole organization globally,” Peter explains.

 

What is the job about?

Rather than producing practical prototypes, we now want to carry out virtual simulations in Grundfos – to find the right solution right away.  New solution concepts can be tested and the functionality of these can be verified before purchasing and manufacturing of components. This allows us to carry out virtual testing loops and gives us more scope to test new ideas, and it can be done early in the project without major economic costs.

You will be responsible for reducing lead-time by securing a robust design on new and existing production equipment. You do so using simulation and by developing processes in tool concepts and integration with periphery equipment, including welding principles.

Your main tasks will therefore include:

  • Cooperating across the organization to achieve the best results within time, cost, and quality, where you maintain an overview of the different processes, so that we can make the right decisions together.
  • Applying simulations virtually, from the product simulation to equipment, and further to the production line/machine.
  • Working on the entire virtual production concept from 3D product to the final part assembly of components in our production area.
  • Ensuring knowledge sharing in our organization through internal and external networks

 

What do you need to apply?

Most important to us is your interest within this specific area – and your wish to work on both virtual simulations and 3D CAD construction. If you have experience these areas, that is a big plus. Moreover, we imagine that you:

  • Are a Mechanical Engineer (Manufacturing Engineering) or hold an MSc. in Engineering in Technology Based Business Development or International Technology Management
  • Have experience with finite element analysis, topology optimisation and robust design
  • Have experience with 3D CAD modelling (We use Catia V5) - preferably within welding
  • Have experience in simulation of production equipment in Catia and/or LS-Dyna
  • Speak and write English fluently.

On a personal level, you are outgoing and thrive collaborating with colleagues. Also, you do not mind being a bit of a nerd when it comes to analysing simulation and welding of components to figure out which processes will bring us success. With your analytical mind-set, you have to stay updated on developments to know which components to produce and how,” Peter finishes.

 

Additional informationIf you have questions or want to know more about the position, please contact Department Head Peter Thomsen Høgh on +45 87 50 44 21.

If this job sounds appealing to you, please send your resume and cover letter today and no later than 02 August 2019 by clicking on “Apply”. We expect interviews to be held on Week 28 2019.

We look forward to hearing from you.

If you want to dig deeper into the Grundfos universe, please visit us on LinkedIn: www.linkedin.com/company/5195 or our YouTube channel: www.youtube.com/watch?v=zwY54t455CU

GRUNDFOS HOLDING A/SBjerringbro2019-06-23T00:00:002019-08-19T00:00:00
330068475Blades CIM EngineerRobot Are you an experienced Blade Continuous Improvement Management (CIM) Engineer looking for a new and exciting opportunity to make your role your own? Here at Vestas, we are expanding rapidly and now have a need to create a new Blade CIM Team to cope with demand. Turbine Solutions Blades Blades Feasibility, Ope. Support TCM The new Blade CIM Team will be part of the Blade Operational Support department which is responsible for ensuring seamless execution of the blade design intent in factories and service with an aim to minimise total full life cost of ownership of our blade module. The Blade CIM Team will specifically focus on ensuring identified blade CIM issues are rapidly understood, contained, mitigated and prevented in the future. Responsibilities As part of the team, you will participate in a wide selection of allocated CIM issues and contribute to the reduction in blade related CIM costs. Work closely with blade engineering personnel to identify blade CIM issues Use root cause analysis to understand, contain and prevent future problems and design faults Rectify or repair problems within the design phase Work closely with factory and field teams to modify or redesign blades Ensure design timelines are not impacted Analyse and assess cause and effect of mechanical issues Qualifications A relevant engineering degree, ideally mechanical Competencies Composite design and process knowledge Wind Turbine blade experience Highly effective communication Networking skills Safety focussed Self-driven and execution focussed What we offer A unique opportunity to be a part of a brand-new team within Vestas Wind Systems. Be part of the world s best wind turbine manufacturer with the world s largest installed fleet and greatest market share. Additional information This role is based in Lem, Denmark. Travel will be approximately 33 of your time. For additional information, please contact Paul Badger, Senior Director T H AAO Eng, on 447587 777 864. About Vestas Vestas is the energy industry s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with more than 101 GW of wind turbines in 80 countries, we have installed more wind power than anyone else. Through our industry-leading smart data capabilities and unparalleled more than 86 GW of wind turbines under service, we use data to interpret, forecast, and exploit wind resources and deliver best-in-class wind power solutions. Together with our customers, Vestas more than 24,600 employees are bringing the world sustainable energy solutions to power a bright future. We invite you to learn more about Vestas by visiting our website at www.vestas.com and following us on our social media channels.

Are you an experienced Blade Continuous Improvement Management (CIM) Engineer looking for a new and exciting opportunity to make your role your own?


Here at Vestas, we are expanding rapidly and now have a need to create a new Blade CIM Team to cope with demand.


Turbine Solutions > Blades > Blades Feasibility, Ope. Support & TCM
The new Blade CIM Team will be part of the Blade Operational Support department which is responsible for ensuring seamless execution of the blade design intent in factories and service with an aim to minimise total full life cost of ownership of our blade module.


The Blade CIM Team will specifically focus on ensuring identified blade CIM issues are rapidly understood, contained, mitigated and prevented in the future.


Responsibilities

As part of the team, you will participate in a wide selection of allocated CIM issues and contribute to the reduction in blade related CIM costs.

  • Work closely with blade engineering personnel to identify blade CIM issues
  • Use root cause analysis to understand, contain and prevent future problems and design faults
  • Rectify or repair problems within the design phase
  • Work closely with factory and field teams to modify or redesign blades
  • Ensure design timelines are not impacted
  • Analyse and assess cause and effect of mechanical issues

Qualifications

  • A relevant engineering degree, ideally mechanical

Competencies

  • Composite design and process knowledge
  • Wind Turbine blade experience
  • Highly effective communication
  • Networking skills
  • Safety focussed
  • Self-driven and execution focussed

What we offer

A unique opportunity to be a part of a brand-new team within Vestas Wind Systems.


Be part of the world’s best wind turbine manufacturer with the world’s largest installed fleet and greatest market share.
 

Additional information
This role is based in Lem, Denmark.


Travel will be approximately 33% of your time.


For additional information, please contact Paul Badger, Senior Director T&H & AAO Eng, on +447587 777 864.

About Vestas

Vestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with more than 101 GW of wind turbines in 80 countries, we have installed more wind power than anyone else. 

Through our industry-leading smart data capabilities and unparalleled more than 86 GW of wind turbines under service, we use data to interpret, forecast, and exploit wind resources and deliver best-in-class wind power solutions. 

Together with our customers, Vestas’ more than 24,600 employees are bringing the world sustainable energy solutions to power a bright future.

We invite you to learn more about Vestas by visiting our website at www.vestas.com and following us on our social media channels.

VESTAS WIND SYSTEMS A/SLem St2019-08-05T00:00:002019-08-19T00:00:00
da-DK

Andre job der matcher din søgning

Senior Mechanical Engineer for wind power solution project_DK

KK WIND SOLUTIONS A/S

Ikast
Would you like to join a global team of brilliant, creative engineers designing the most innovative, efficient and stable wind power solutions? Joining us in Ikast, you will become a part of a global team with 2 colleagues in Denmark, 8 in Poland an...
Indrykket:26. juli 2019
Udløbsdato:18. september 2019

Structural Simulation Specialist

GRUNDFOS HOLDING A/S

Bjerringbro
What do we offer? Would you like to design, optimize and verify the structural performance of world class pumps using advanced structural simulations? Grundfos has a strong strategic focus on Simulation Driven Development and our vision is to develo...
Indrykket:5. august 2019
Udløbsdato:5. september 2019

Engineers with EASA Part 66 B1 AML for Line Maintenance

SKYWAYS TECHNICS A/S, BLL

Billund
Skyways Technics A S is searching for qualified, motivated and team oriented Engineers for Line Maintenance working on fixed wing aircraft. We offer permanent positions located at our facility in Billund, Denmark. Preferable is applicants with AML a...
Indrykket:28. juni 2019
Udløbsdato:21. august 2019

Virtual Development Engineer

GRUNDFOS HOLDING A/S

Bjerringbro
What do we offer? Do you love working on virtual simulations and 3D design, within our digital journey? Would you like a job that gives you the best of both worlds? Based on theoretical data and virtual simulation, you will be able to see results qu...
Indrykket:23. juni 2019
Udløbsdato:19. august 2019

Blades CIM Engineer

VESTAS WIND SYSTEMS A/S

Lem St
Are you an experienced Blade Continuous Improvement Management (CIM) Engineer looking for a new and exciting opportunity to make your role your own? Here at Vestas, we are expanding rapidly and now have a need to create a new Blade CIM Team to cope ...
Indrykket:5. august 2019
Udløbsdato:19. august 2019